• Elastomers and Composites
• /
• 제51권2호
• /
• pp.147-153
• /
• 2016

Polyvinyl chloride (PVC) has been used as a general-purpose polymer because of its lower cost, good durability and mechanical properties compared to other materials. However, PVC is vulnerable to heat deformation and generates a toxic gas like hydrogen chloride. Therefore, it is important to delay or prevent the flame retardancy and thermal degradation of the PVC during the processing. It was reported that aluminum trihydroxide (ATH) improved flame retardancy as well as smoke inhibition of the virgin polymer. In this study, PVC composites by addition of ATH were compounded in a modular intermeshing co-rotating twin screw extruder. The PVC composites with different concentrations of ATH (0~5 phr) were analyzed. Flame retardancy of the PVC composite significantly increased depending on the ATH concentration. LOI of the composite also increased with the concentration of ATH. There were no significant differences for the thermal properties of the PVC composites with ATH.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3333-3340
• /
• 2010

A three dimensional pharmacophore model was generated for the molecules which are responsible for anti-inflammatory activities targeting Interleukin-2 inducible tyrosine kinase (Itk). 16 structurally diverse molecules were selected as training set to generate the hypotheses using Discovery Studio v2.1. The best hypothesis, Hypo1, comprises two hydrogen bond acceptor (HBA), one hydrophobic aromatic (HA), one ring aromatic (RA) and shows high cost difference (63.71), high correlation coefficient (0.97) as well as low RMS deviation (0.81). Hypo1 has been further validated toward a test set, decoy set and Fischer's randomization method. Furthermore, Hypo1 was used to screen NCI and Maybridge databases. Finally, 2 hit molecules were identified as potential leads against Itk, which may be useful for future drug development.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.427-431
• /
• 2009

ZnO wire-like thin films were synthesized through thermal oxidation of sputtered Zn metal films in dry air. Their nanostructure was confirmed by SEM, revealing a wire-like structure with a width of less than 100 nm and a length of several microns. The gas sensors using ZnO wire-like films were found to exhibit excellent $H_2$ gas sensing properties. In particular, the observed high sensitivity and fast response to $H_2$ gas at a comparatively low temperature of $200^{\circ}C$ would lead to a reduction in the optimal operating temperature of ZnO-based $H_2$ gas sensors. These features, together with the simple synthesis process, demonstrate that ZnO wire-like films are promising for fabrication of low-cost and high-performance $H_2$ gas sensors operable at low temperatures. The relationship between the sensor sensitivity and $H_2$ gas concentration suggests that the adsorbed oxygen species at the surface is $O^-$.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.401-406
• /
• 2015

게터는 반도체와 초소형 전자패키지 소자 내부의 수소와 수증기 같은 기체를 흡착하여 기기 작동 시 방해 기체를 제거하는 기능을 한다. 본 연구에서는 재료와 공정 측면에서 높은 가격 경쟁력을 갖는 게터로, 실리콘 기판에 올라간 다공성 알루미나 구조체를 제조하는 연구를 진행하였다. 기공의 크기가 조절된 양극산화 알루미나(AAO)는 높은 비표면적을 가지며 표면에 OH-기를 다수 포함하므로 높은 효율을 갖는 수분 흡착제로 사용되었다. 등온 수분 흡탈착 곡선으로 분석한 수분 흡착도는 상대습도 35%일 때 2.02%로 우수한 성능을 나타내었다. 즉, 저온에서 사용가능하며, 추가 열원이 필요하지 않아 박막구조의 소형화가 용이하여 내부 손상 및 오염을 방지할 수 있는 게터재를 합성하였다.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.25-31
• /
• 2011

Solid oxide fuel cells (SOFCs) have many attractive features for widespread applications in generation systems. Recently, stainless steels have attractive materials for metallic bipolar plate because metallic bipolar plates have many benefits compared to others such as graphite and composite bipolar plates. SOFC operates on high temperature of about $800{\sim}1000^{\circ}C$ than other fuel cell systems. Thus, many studies have attempted to reduced the operation temperature of SOFC to about $600{\sim}800^{\circ}C$, which is the intermediate temperature (IT) of SOFC. Low cost and high-temperature corrosion resistance are very important for the practical applications of SOFC in various industries. In this study, two specimens, 304 and 430 stainless steels with and without different pre-surface treatments on the surface were investigated. And, specimens were exposed at high temperature in the box furnace under oxidation atmosphere of $800^{\circ}C$. Oxidation behavior have been investigated with the materials exposed at different times (100 hrs and 400 hrs) by SEM, EDS and XRD. By increasing exposure time, the amount of metal oxide increased in the order like; STS304 < STS430 and As-received < As-polished < Sand-blast specimens.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.219-225
• /
• 2022

우리나라의 섬유산업 중 염색가공 분야는 에너지 다소비 업종으로, 노동 집약적 특성에 따라 원단위 생산성이 낮고, 대부분 중소·영세기업 특징이 있다. 염색 원단의 불량률이 높아지면 재염색으로 인한 생산단가 상승과 초과 에너지 투입으로 비용이 증가하기 때문에, 불량률을 최소를 통한 생산량 향상이 초점이었다. 또한 고온고압의 환경에서 이루어지는 염색공정은 사고 위험으로 염색기 원단 투입구를 실시간으로 개방할 수 없기 때문에 실시간으로 원단의 염색상태 확인이 어려웠다. 최근에는 염액을 실시간으로 모니터링하는 연구가 활발히 진행중이다. 본 논문에서는 탁도, pH, 전도도 센서를 이용하여 염액의 흡진율을 계측할 수 있는 복합센서 흡진율 모델 및 구성시스템을 제안하였으며, 실험방법소개와 실험결과 분석을 실시하였다.

• 멤브레인
• /
• 제32권5호
• /
• pp.275-282
• /
• 2022

현대에는 배터리를 비롯한 수소 기반 에너지가 효율적이라고 널리 알려져 있다.이러한 결과는 수소가 에너지 수송체로써의 높은 효율을 가지고 있다는 사실로부터 기반한다. 자연 친화적이며 높은 순도를 가진 수소는 수전해로부터 제조할 수 있다. 다양한 종류의 전기분해 중, 수소이온 교환막 수전해는 가장 재생 가능하며 싸고 자연 친화적이다. 이는 에너지로써 사용이 되기에 적합한 산소와 수소를 생성한다. 이와 같이 많은 장점이 있기에 활발한 연구가 수소이온 교환막 전기분해에 대해 진행되고 있다. 나피온은 수소이온 교환막으로 널리 쓰이지만, 비싼 비용과 다양한 다른 단점으로 인해 여러 가지 종류의 대체재가 개발되고 있다. 본 총설에서는 크게 나피온과 비나피온(non-Nafion) 기반 수소이온 교환막 수전해로 나누어 다루었다.

• 한국표면공학회지
• /
• 제56권3호
• /
• pp.208-218
• /
• 2023

Photocatalysts are advanced materials which accelerate the photoreaction by providing ordinary reactions with other pathways. The catalysts have various advantages, such as low-cost, low operating temperature and pressure, and long-term use. They are applied to environmental and energy field, including the air and water purification, water splitting for hydrogen production, sterilization and self-cleaning surfaces. However, commercial photocatalysts only absorb ultraviolet light between 100 and 400 nm of wavelength which comprises only 5% in sunlight due to the wide band gap. In addition, rapid recombination of electron-hole pairs reduces the photocatalytic performance. Recently, studies on blackening photocatalysts by laser, thermal, and plasma treatments have been conducted to enhance the absorption of visible light and photocatalytic activity. The disordered structures could yield mid-gap states and vacancies could cause charge carrier trapping. Herein, liquid phase plasma (LPP) is adopted to synthesize Ag-doped black ZnO for the utilization of visible-light. The physical and chemical characteristics of the synthesized photocatalysts are analyzed by SEM/EDS, XRD, XPS and the optical properties of them are investigated using UV/Vis DRS and PL analyses. Lastly, the photocatalytic activity was evaluated using methylene blue as a pollutant.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.377-384
• /
• 2023

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H₂) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO₄) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO₄ had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec^-1 at a current density of 10 mA cm^-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.

• 청정기술
• /
• 제30권1호
• /
• pp.55-61
• /
• 2024

연료전지의 산소환원반응용 백금 촉매의 높은 비용을 극복하기 위하여 나노 구조 제어를 통한 고성능의 백금 합금 촉매 개발 연구가 활발히 수행되고 있다. 본 연구에서는 탄소에 담지된 니켈-니켈 질화물 복합체와 백금 이온 간의 갈바닉 치환 반응 시 용액의 pH 조절을 통한 촉매의 나노구조를 중공형이나 코어-쉘 구조로 제어하는 방법을 제시하였다. X선 회절 분석과 투과전자현미경, 유도결합 플라즈마를 이용한 분석을 통해 합성 조건에 따른 금속의 상태와 함량 및 합금 입자의 형상에 대한 물리적 특성 평가를 수행하였다. 제조된 촉매를 산소환원반응 촉매로 적용하였으며 상용 백금 촉매 대비 1.7배(중공형 촉매) 및 1.9배(코어-쉘 구조 촉매) 개선된 전기화학적 활성 면적 당 활성을 나타내었다.