• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.416-421
• /
• 2001

The optimization of the reductant and acid concentration for stannane($SnH_4$) generation was investigated by using a continuous flow hydride generator combined with an inductively coupled plasma-atomic emission spectrometer. Several different prereductants were studied to remove the interfering effect of fluoride ion on the hydride generating of tin. The optimum acid concentration was 0.5-1.0 M for the 1-2% $NaBH_4$ and 1.0 M NaOH and the interfering effect of fluoride ion was minimized using boric acid and L-cysteine mixed solution as a prereductant. The reconveries of tin at 20 ng/mL level in the solution containing fluoride ion were 100~108 %.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.2
• /
• pp.148-157
• /
• 2022

Research on hydrogen storage is active to properly deal with hydrogen, which is considered a next-generation energy medium. In particular, research on metal hydride with excellent safety and energy efficiency has attracted attention, and among them, magnesium-based hydrogen storage alloys have been studied for a long time due to their high storage density, low cost, and abundance. However, Mg-based alloys require high temperature conditions due to strong binding enthalpy, and have many difficulties due to slow hydrogenation kinetics and reduction in hydrogen storage capacity due to oxidation, and various strategies have been proposed for this. This research manufactured Mg₂Ni to improve hydrogenation kinetics and synthesize about 5, 10, 20 wt% of CaF₂ as a catalyst for controlling oxidation. Mg₂NiHx-CaF₂ produced by hydrogen induced mechanical alloying analyzed hydrogenation kinetics through an automatic PCT measurement system under conditions of 423 K, 523 K, and 623 K. In addition, material life cycle assessment was conducted through Gabi software and CML 2001 and Eco-Indicator 99' methodology, and the environmental impact characteristics of the manufacturing process of the composites were analyzed. In conclusion, it was found that the effects of resource depletion (ARD) and fossil fuels had a higher burden than other impact categories.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.558-559
• /
• 2008

본 논문은 미 일리노이 주립대 어바나-샴페인 캠퍼스에서 주로 군사용 응용 관련하여 개발 중인 마이크로 PEM 연료전지 시스템 개발에 대한 논문이다. 본 연구는 수소 저장 장치까지 포함하여 1 $mm^3$의 초소형 연료전지 시스템을 목표로 진행 중이며 본 논문은 이러한 진행 과정 중 화학적 하이드라이드 기반의 수소 발생기와 10 $mm^3$의 시스템 개발 과정에 대해 보고한다.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.230-233
• /
• 1996

The purposes of this study was to investigate selenium content of human milk and selenium intake of breast-fed infants at each period of lactation longitudinally. The human milk intake in breast-fed infants was measured by test weighing method from 20 lactating mothers at 1,2 and 3 months postpartum. Selenium content in the milks was determined by atomic absorption spectrophotometry with hydride generation after wet digestion of samples. Selenium intake in breast-fed infants was calculated by multiplying human milk intakes by selenium contents. The milk intakes were 640, 726 and 715g/day at 1,2 and 3 months postpartum. The selenium contents in human milk were characterized by a pattern of slight decline with advancing stage of lactation;13.1, 11.5 and 9.8$\mu\textrm{g}$/L at 1,2 and 3 months during lactation. There was a large individual variation at any stage of this study. The mean dietary selenium intakes in breast-fed infants were 8.38, 8.32 and 6.97$\mu\textrm{g}$/day at 1,2 and 3 months postpartum, respectively. The mean daily intakes on a body weight basis were gradually decreased during the course of lactation.

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.159-167
• /
• 2012

Hydrogen is in the spotlight as an alternative next generation energy source for the replacement of fossil fuels because it has high specific energy density and emits almost no pollution, with zero $CO_2$ emission. In order to use hydrogen safely, reliable storage and transportation methods are required. Recently, solid hydrogen storage systems using metal hydrides have been under extensive development for application to fuel cell vehicles and fuel cells of MCFC and SOFC. For the practical use of hydrogen on a commercial basis, hydrogen storage materials should satisfy several requirements such as 1) hydrogen storage capacity of more than 6.5wt.% $H_2$, moderate hydrogen release temperature below $100^{\circ}C$, 3) cyclic reversibility of hydrogen absorption/desorption, 4) non toxicity and low price. Among the candidate materials, Li based metal hydrides are known to be promising materials with high practical potential in view of the above requirements. This paper reviews the characteristics and recent R&D trends of Li based complex hydrides, Li-alanates, Li-borohydrides, and Li-amides/imides.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1431-1438
• /
• 2013

A pack-level battery hardware-in-the-loop simulation (B-HILS) platform is implemented. It consists of dynamic vehicle models using PSAT and multiple control interfaces including real-time 3D driving and GPS mode. In real-time 3D driving mode, user can drive a virtual vehicle using actual drive equipment such as steering wheel and accelerator to generate the cycle profile of the battery. In GPS mode, actual road traffic and terrain effects can be simulated using GPS data while the trajectory is displayed on Google map. In the latter part of the paper, several performance tests of an actual lithium-polymer battery pack are carried out utilizing the developed system. All experiments are conducted as parts of actual development process of a commercial battery pack adopting 2nd generation Prius as a target vehicle model. Through the experiments, the low temperature performance and fuel efficiency of the battery are quantitatively investigated in comparison with the original nickel-metal hydride (NiMH) pack of the Prius.

• The Journal of Pediatrics of Korean Medicine
• /
• v.8 no.1
• /
• pp.59-74
• /
• 1994

The Study was performed on the anticonvulsive effects of Woohwangporyonghwan(WPH) and Woohwangporyonghwan except CINNABARIS and REALGAR(WPHCR) in ICR mice pretreated with strychnine, picrotoxin, and caffeine as convulsive agents, and also was done on the accumulation of Hg & AS in organs of ICR mice by ICP hydride generation method. The results were obtained as follows: 1. WPH and WPHCR group showed significant effect in delaying the onset of convulsion induced by strichine, but time to death was effective only in WPHCR group. 2. WPH and WPHCR group were significantly effective in delaying convulsion induced by picrotoxin, and time to death. 3. The anticonvulsive effect of WPH and WPHCR group was not found convulsion induced by caffeine. 4. The accumulation of Hg, AS in liver and kidney of ICR mice was not determined below 50ng/g and below 80ng/g respectively. From the above results it could be concluded that WPH and WPHCR group were effective in the convulsions induced by strychnine and picrotoxin, although the accumulation of Hg & As in liver and kidney was not proved, further study might be necessary to prove the drug safety of WPH included CINNABARIS and REALGAR.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.2
• /
• pp.178-183
• /
• 2011

Metal hydride alloys are a promising type of material in hydrogen storage applications, allowing for low-pressure, high-density storage. However, while many studies are being performed on enhancing the hydrogen storage properties of such alloys, there has been little research on large-scale storage vessels which make use of the alloys. In particular, large-scale, high-density storage devices must make allowances for the inevitable generation or absorption of heat during use, which may negatively impact functioning properties of the alloys. In this study, we develop a numerical model of the discharge properties of a high-density MH hydrogen storage device. Discharge behavior for a pilot system is observed in terms of temperature and hydrogen flow rates. These results are then used to build a numerical model and verify its calculated predictions. The proposed model may be applied to scaled-up applications of the device, as well as for analyses to enhance future device designs.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1715-1720
• /
• 2019

Jozef Stefan Institute (JSI), TRIGA Mark II reactor employs the homogeneous mixture of uranium and zirconium hydride fuel type. Since its upgrade, a series of fresh fuel steady state experimental benchmarks have been conducted. The benchmark results have provided data for testing computational neutronics codes which are important for reactor design and safety analysis. In this work, we investigated the JSI TRIGA Mark II reactor neutronics characteristics: the effective multiplication factor and two safety parameters, namely the control rod worth and the fuel temperature reactivity coefficient using SuperMC. The modeling and real-time cross section generation methods of SuperMC were evaluated in the investigation. The calculation analysis indicated the following: the effective multiplication factor was influenced by the different cross section data libraries; the control rod worth evaluation was better with Monte Carlo codes; the experimental fuel temperature reactivity coefficient was smaller than calculated results due to change in water temperature. All the results were in good agreement with the experimental values. Hence, SuperMC could be used for the designing and benchmarking of other TRIGA Mark II reactors.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.773-783
• /
• 1998

The heating system for apartment complex may be classified as old systems including central system with steam boiler(S1), gas engine driven heat pump system(S2), system using waste heat(S3) and new systems including mechanical vapor re-compression system with flashing heat exchangers(S4), system using methanol(S5), system using metal hydride (S6). The purpose of the present study is to suggest optimal heating system by technically, economically and environmentally evaluating old and new heating systems of apartment complex from 500 to 3,000 households. Economic evaluation based on the technical evaluation results which estimated heat transfer area of heat exchangers and capacity of equipments was estimated initial investment cost, annual operating cost and relative payback period by considering annual increasing rates of energy cost and interest. Environmental evaluation provided annual generation rate of carbon dioxide. Initial investment cost was cheap in the order of S6, S5, S3, S2, S4, S1, annual operating cost was cheap in the order of S1, S2, S4, S5 and relative payback period was short in the order of S6, S5, S2, S3 and S4. Relative payback period was within 8 years for all scenarios of 3,000 households, and was increased as annual increasing rates of energy cost and interest were increased. As transportation pipe length was increased twice, payback period was increased by 1.4~2.6 time. The effect of temperatures of waste gas and waste water on the relative payback period was small within 0.8 years. The annual generation rate of carbon dioxide was big in the order of S4, S2 and S1. S4 was the most economic system among whole scenarios when S1 was replaced with other scenarios.