• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.67-73
• /
• 2018

The paper deals with an approach to time domain simulation for closed end at the downstream of pipe, hydraulic lines terminating into a tank and series lines with change of cross sectional area. Time domain simulation of a fluid power systems containing hydraulic lines is very complex and difficult if the transfer functions consist of hyperbolic Bessel functions which is the case for the distributed parameter dissipative model. In this paper, the magnitudes and phases of the complex transfer functions of hydraulic lines are calculated, and the MATLAB Toolbox is used to formulate a rational polynomial approximation for these transfer functions in the frequency domain. The approximated transfer functions are accurate over a designated frequency range, and used to analyze the time domain response. This approach is usefully to simulate fluid power systems with hydraulic lines without to approximate the frequency dependent viscous friction.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 2000

In this study, the movable bed model testing was carried out so as to analyze bed profile changes including predicting scouring and deposition of bed profile and to solve hydraulic problems affecting with bed and both-bank between upstream and downstream of intake weir in the Nakdong river channel. The movable bed model testing consists of fundamental test, movable model test and numerical analysis method respectively. The fundamental test was enforced to analyze relationship of discharge and sediment load in the tilting flume. When the movable model test was worked, it was shown that sediment budget between input sediment load and output sediment load was balanced exactly. As a result of movable model test, it was presented that scouring and deposition changes in quantities between the upstream and downstream of modification weir were less than those of nature and planning weir. Finally, numerical analysis method was operated by 1-dimensional bed profile changes model ; HEC-6 model so as to complement unsolving hard problems during movable model test. So, modification weir will sustained the stable bed profile changes than any other weirs in the study channel.

• 터널과지하공간
• /
• 제23권6호
• /
• pp.470-479
• /
• 2013

수압파쇄는 암반에서 유체의 흐름을 촉진시키기 위한 방법으로 사용되며 지열개발, 세일가스의 개발 등 최근 에너지 분야에서 그 어느 때 보다 활발한 연구가 이루어지고 있다. 수압파쇄의 대상이 되는 암반은 등방성을 갖지 않는 경우가 대부분이며 일부 퇴적암층에서는 횡등방성 암반에서 수압파쇄가 이루어진다. 횡등방성 암반에서는 수압파쇄에서 발생하는 균열의 성장 방향이 반드시 최대주응력 방향과 일치하지 않으며 이방성 구조에 따라 변화하게 된다. 그러므로 이 연구에서는 입자결합모델을 이용하여 횡등방성 암석에서의 수압파쇄 특성을 고찰하고 분석하고자 하였다. 또한 실험실 규모의 수압파쇄 실험을 실시하여 수치해석 결과의 타당성을 분석하고자 하였다. 본 연구에서는 가압되는 유체의 점도 및 층리면의 각도 그리고 이방성에 의한 영향으로 균열의 성장 및 균열 패턴에 큰 차이를 보였으며, 횡등방성 모델의 경우 전단균열에 의한 수압파쇄 균열의 성장이 우세한 것으로 나타났다.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.168-175
• /
• 2002

The hydraulic acoustic attenuator fur an automotive active suspension system is so highly nonlinear and of high order that the analysis in time-domain has been performed quite little. In this paper, a state-space representation of the dynamics for a hydraulic attenuator was presented utilizing the electrical analogy. And the results of experiment were compared with those of simulation to validate the state-space model proposed. The comparison revealed that the state-space model proposed is practically applicable to estimate the dynamic responses of the hydraulic attenuator in time-domain.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.705-712
• /
• 2002

Geotextile tube is environmentally sustainable technology and has been applied in hydraulic and coastal engineering applications. Geotextile tube is composed in permeable fabrics and Inside dredged materials, and hydraulically or mechanically filled with dredged materials. These tube are generally about 1.0m to 2.0m in diameter, through they can be sized for any application. The tubes can be used solely, or stacked to add greater height and usability. Stacked geotextile tubes will create by adding the height necessary for some breakwaters and embankment, therefore increasing the usability of geotextile tubes. This paper presents the hydrodynamic behavior of stacked geotextile tube by hydraulic model tests. The hydraulic model test conducted by structural condition and wave conditions. Structural condition is installation direction to the wave(perpendicular band 45$^{\circ}$), and wave condition is varied with the significant wave height ranging from 3.0m to 6.0m. Based on the test results, the hydrodynamic behaviors such as structural stability, wave control capacity, and strain are interpreted.

• 한국시뮬레이션학회논문지
• /
• 제23권2호
• /
• pp.17-24
• /
• 2014

본 논문은 항공기용 EHA의 열유동 해석모델을 개발하고 활용하는 사례를 보여준다. 연구진행 절차는 다음과 같다. 첫째, 설계 컨셉에 맞는 물리량을 반영하는 유압단품 해석모델을 개발한다. 둘째, 유압단품 모델을 조합하여 EHA 유압모델로 확장한다. 셋째, 열유동이 포함된 해석모델을 개발하여 초기온도와 부하의 변화에 따른 유온의 상승시간을 검토한다. 마지막으로, 여러 케이스의 열유동 해석결과가 조합된, 설계에 활용이 가능한 지배그래프를 작성하여 제안한다. 이 모든 과정은 상용 소프트웨어인 AMEsim을 사용하여 진행한다.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.561-566
• /
• 2001

본 연구는 자연하천에서 유로변경 계획구간에 대한 수리특성을 수치모형시험을 통해 분석하는 것이다. 이 연구를 통해 하천공사 특히 홍수시 피해방지와 하천의 흐름특성을 파악하는 기보자료를 제공할 것이다. 본 연구에서는 수리특성분석을 위해 1차원 모형은 HEC-RAS 모형과 2차원 유한요소모형인 RMA2 모혀이 어떻게 유로만곡부의 흐름형태와 급경사면, 복잡한 하상형태 등의 하천 흐름특성에 영향을 미치는가를 분석하는데, HEC-RAS보다 더 효과적임을 알 수 있었다.

• 한국수자원학회논문집
• /
• 제38권3호
• /
• pp.179-188
• /
• 2005

본 연구에서는 화북다목적댐을 대상으로 2차원, 3차원 수치모형실험이 수리모형실험과 더불어 설계자에게 유용한 해석도구로 사용될 수 있음을 보였다. 2차원, 3차원 수치모형으로 천수방정식을 지배방정식으로 하는 RMA2와 RANS를 지배방정식으로 하는 FLOW-3D 모형을 이용하였다. 수몰지역과 접근수로에서의 유황, 월류웨어의 방류능력, 월류부, 도류부, 감세지에서의 수면형상, 월류부에서의 압력분포에 대한 수치모의 결과를 수리모형실험 결과와 비교하였다. 비교 결과, 대부분의 경우에 수치모의 결과는 수리모형실험 결과를 잘 재현하는 것으로 나타났다 그러나, 감세지에서의 도수현상에 대한 수치모의 결과는 공기연행효과로 인해 수리모형실험 결과와 다소 차이가 발생하는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.1-11
• /
• 2013

Unsaturated hydraulic conductivity function is one of key parameters to solve the flow phenomena in problems of landslide. Prediction models for hydraulic conductivity function related to soil-water retention curve equations in many geotechnical applications have been still used instead of direct measurement of the hydraulic conductivity function since prediction models from soil-water retention curve equations are attractive for their fast and easy use and low cost. However, many researchers found that prediction models for the hydraulic conductivity function can not predict the hydraulic conductivity exactly in comparison with experimental outputs. This research introduced an inverse analysis to evaluate the hydraulic conductivity function corresponding to experimental output from the flow pump system. Optimisation process was carried out to obtain the hydraulic conductivity function. This research showed that the inverse analysis with flow pump system was suitable to assess the hydraulic conductivity in unsaturated soil, and the prediction models for the hydraulic conductivity were led to the significant discrepancy from actual experimental outputs.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.76-82
• /
• 1998

It is necessary to calculate the accurate velocity from the hydraulic model for the reliable prediction of water quality changes in water supply system. To verify the hydraulic analysis of the water supply system, fluoride was used as a tracer to calculate the travel time from the injection point to the sampling points. Results from this field experiment indicate that fluoride can be a good conservative tracer while it showed a little longitudinal dispersion along the pipe lines. And the velocity from the model was verified by these travel times and calibrated by changing the ratio of the unaccountable water. When the ratio of the unaccountable water. When the ratio of the unaccountable water was 20%, the error between the estimation of hydraulic model and the real travel time was minimum.