• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.89-89
• /
• 2006

Polyalkylene phosphates - polymers that are built on the repeating unit of the diester of phosphoric acid: -[OP(O)(OH)Oalkylene]-, are known to form backbones of nucleic and teichoic acids. Various synthetic ways will be reported for the synthesis of the bare chains, where "alkylene" in the formula above means mostly two or three methylene groups. Some other structures have also been prepared. Several applications of these polymers are to be discussed, namely as liquid membranes, as components of two-block copolymers (ionic-nonionic diblock dihydrophilic) used as modifiers of CaCO3 crystallization, and as components of the inorganic-polymer hybrid materials. Some other applications in the biomedical field will also be discussed.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.147-170
• /
• 2014

This paper focuses on the study of the most recent ultra-filtration techniques, based on porous polymer membranes, used for the treatment of wastewater from oil, mine and hydrometallurgical industries. The performance of porous membranes used in separation and recovery of oil and heavy metals from wastewater, was evaluated by the polymer composition and by the membrane characteristics, as it follows: hydrophobicity or hydrophilicity, porosity, carrier (composition and concentration), selectivity, fouling, durability, separation efficiency and operating conditions. The oil/water efficient separation was observed on ultra-filtration (UF) techniques, with porous membranes, whereas heavy metals recovery from wastewater was observed using porous membranes with carrier. It can be concluded, that in the ultra-filtration wastewater treatments, a hybrid system, with porous polymer membranes with or without carrier, can be used for these two applications: oil/water separation and heavy metals recovery.

• 멤브레인
• /
• 제14권1호
• /
• pp.53-56
• /
• 2004

Direct Methanol Fuel Cell (DMFC) is considered as a candidate technology for applications in stationary, transportation as well as electronic power generation purposes. To develop a high performance direct methanol fuel cell(DMFC), a competent electrolyte membrane is needed. The electrolyte membrane should be durable and methanol crossover must be low. One of the approaches to increase the stability of generally used polymer electrolyte membranes such as Nafion against swelling or thermal degradation is to bond it with an inorganic material physically or chemically. In Noritake Company, we have developed a novel method of reinforcing the polymer electrolyte matrix with inorganic fibers. Methanol crossover values measured were significantly lower than the original polymer electrolyte membranes. These fiber reinforced electrolyte membranes (FREM) were used for DMFC study and stable power output values as high 160 mW/$\textrm{cm}^2$ were measured. The details of the characteristics of the membranes as well as I-V data of fuel cell stacks are detailed in the paper.

• Elastomers and Composites
• /
• 제57권2호
• /
• pp.62-72
• /
• 2022

Passive daytime radiative cooling (PDRC) is attracting increasing attention as an eco-friendly technology that can save cooling energy by not requiring an external power supply. An ideal PDRC structure should improve solar reflectance and emissivity within the atmospheric spectral window. Early designs of photonic crystal materials demonstrated the benefits of PDRC. Since then, functional arrangements of polymer-based radiative cooling materials have played an important role and are rapidly expanding. This review summarizes the known inorganic, organic, and hybrid materials for PDRC. The review also provides a complete understanding of PDRC and highlights its practical applications.

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.313-320
• /
• 2013

이 연구에서는 환경을 고려한 고성능 보수 보강재료 개발을 위하여 섬유를 보강한 폴리머 시멘트 모르타르의 특성을 연구하였다. 친환경 수지인 UM 수지를 일반 시멘트 모르타르와 일정 비율로 혼합하였다. 강도 증진의 영향을 확인하기 위해서 PVA 섬유, 강섬유 그리고 PVA섬유와 강섬유를 일정한 비율로 혼합한 하이브리드 섬유를 일정한 비율로 첨가하였다. 강도특성을 파악하기 위하여 섬유를 보강한 폴리머 시멘트 모르타르에 대하여 압축강도, 쪼갬 인장강도, 휨강도 실험을 수행하였다. 내구성을 파악하기 위하여 폴리머 시멘트 모르타르에 대하여 흡수율 실험, 내약품성 실험을 수행하였다. 실험 결과 UM 수지 폴리머 시멘트 모르타르는 내구성능이 개선되었고, 이러한 폴리머 시멘트 모르타르에 섬유를 보강하면 콘크리트 및 모르타르의 취약점인 인장강도와 휨강도가 증가하였다. 향후 외부 노출된 콘크리트 구조물의 내구성 향상을 위한 보수보강재료로 사용성을 확인하였다.

• 폴리머
• /
• 제32권1호
• /
• pp.26-30
• /
• 2008

추간판 디스크의 섬유륜(AF)조직 재생에 적합한 다양한 담체를 평가하기 위해 천연재료인 소장점막하조직(SIS)과 탈미네랄화된 골분(DBP)을 폴리(락타이드-글리콜라이드) 공중합체(PLGA)와 혼합하여 담체(PLGA/SIS, PLGA/DBP, PLGA/SIS/DBP)를 제조하였으며, PLGA담체, PGA 메쉬, SIS 스폰지와 비교하였다. 제조된 담체의 압축강도 및 AF 세포를 담체에 파종하여 콜라겐 양과 DNA량을 측정하였으며, 이를 누드마우스 피하에 이식 후 적출하여 육안관찰과 조직학적인 평가를 수행하였다. 압축강도 측정에서 PLGA와 유사하게 PLGA/SIS, PLGA/DBP 에서도 충분한 강도를 나타내었다. DNA 증가량에 따른 콜라겐 양은 PLGA/SIS 에서 가장 높게 나타났고, 면역화학 염색을 통해 PLGA/SIS, PLGA/SIS/DBP 에서 글라이코스아미노글라이칸과 콜라겐 발현량이 높음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2489-2493
• /
• 2012

A new fluorescent system (acridine/RTIL hybrid gel) confined in the 3D micro-structure of a poly(lactic acid) membrane were prepared from 1-butyl-3-methylimidazolium-based ionic liquids ([bmim]X (X = $SbF_6$, $NTf_2$, Cl); RTILs), poly(lactic acid) (PLA), and acridine via the sol-gel route. SEM images showed that, in the presence of [bmim]$SbF_6$ and [bmim]$NTf_2$, 3D-ly paticulated structures were created inside the PLA membranes and acridine/RTIL hybrid gels were confined in gabs of particulates. However, the use of [bmim]Cl induced the formation of a 3D-ly porous structure containing the hybrid gel of acridine/[bmimCl in the micropores. The three fluorescent systems exhibited different fluorescence behaviors (fluorescence maximum and intensity) depending on the C2-H acidity scale of the RTILs (or their anion type). Acridine gels hybridized with [bmim]$SbF_6$ and [bmim]$NTf_2$ showed blue fluorescence with relative high intensity, whereas the hybrid gel with [bmim]Cl exhibited almost no fluorescence under dry conditions. However, the acridine/[bmim]Cl hybrid system in the micro-porous PLA membrane started to emit fluorescent light under humid conditions and showed a possible response, indicating that it could be applied as a humidity sensor.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.17-24
• /
• 2020

As an interconnect scaling faces a technical bottleneck, the device stacking technologies have been developed for miniaturization, low cost and high performance. To manufacture a stacked device structure, a vertical interconnect becomes a key process to enable signal and power integrities. Most bonding materials used in stacked structures are currently solder or Cu pillar with Sn cap, but copper is emerging as the most important bonding material due to fine-pitch patternability and high electrical performance. Copper bonding has advantages such as CMOS compatible process, high electrical and thermal conductivities, and excellent mechanical integrity, but it has major disadvantages of high bonding temperature, quick oxidation, and planarization requirement. There are many copper bonding processes such as dielectric bonding, copper direct bonding, copper-oxide hybrid bonding, copper-polymer hybrid bonding, etc.. As copper bonding evolves, copper-oxide hybrid bonding is considered as the most promising bonding process for vertically stacked device structure. This paper reviews current research trends of copper bonding focusing on the key process of Cu-SiO₂ hybrid bonding.

• Corrosion Science and Technology
• /
• 제16권2호
• /
• pp.85-89
• /
• 2017

One of the most challenging issues in the oil and gas industry is corrosion assessment and management in subsea structures or equipment. At present, almost all steel pipelines are sensitive to corrosion in harsh working environments, particularly in salty water and sulphur ingress media. Nowadays, the most commonly practiced solution for a damaged steel pipe is to entirely remove the pipe, to remove only a localized damaged section and then replace it with a new one, or to cover it with a steel patch through welding, respectively. Numerous literatures have shown that fiber-reinforced polymer-based composites can be effectively used for steel pipe repairs. Considerable research has also been carried out on the repair of corroded and gouged pipes incorporated with hybrid natural fiber-reinforced composite wraps. Currently, further research in the field should focus on enhanced use of the lesser and highly explored hybrid-biocomposite material for the development in corrosion prevention. A hybrid-biocomposite material from renewable resource based derivatives is cost-effective, abundantly available, biodegradable, and an environmentally benign alternative for corrosion prevention. The aim of this article is to provide a comprehensive review and to bridge the gap by developing a new hybrid-biocomposite with superhydrophobic surfaces.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.220-223
• /
• 2005

The rapid prototyping (RP) technology has been advanced for various applications such as verification of design, functional test. However, many RP machines still have low accuracy and limitation of applications for various materials. In this research, a hybrid RP system was developed to improve precision of micro parts. This hybrid system consists of deposition and material removal process by mechanical micro machining to fabricate nano composites using photo-curable polymer resin with various nano particles. In this work, using hybrid RP process with Multi-Walled Carbon Nano Tube (MWCNT) and hydroxyapatite, micro parts were fabricated. The precision of parts was evaluated based on the original CAD design, and to see the effect of nano particles on mechanical properties, tensile strength was measured. From the results of experiments, it was confirmed that the part made by hybrid process had higher precision, and the addition of nano particles improved mechanical properties.