• Korean Journal of Radiology
• /
• v.22 no.5
• /
• pp.697-705
• /
• 2021

Objective: To investigate the feasibility and the accuracy of the coronary CT angiography (CCTA)-derived Registry of Crossboss and Hybrid procedures in France, the Netherlands, Belgium and United Kingdom (RECHARGE) score (RECHARGECCTA) for the prediction of procedural success and 30-minutes guidewire crossing in percutaneous coronary intervention (PCI) for chronic total occlusion (CTO). Materials and Methods: One hundred and twenty-four consecutive patients (mean age, 54 years; 79% male) with 131 CTO lesions who underwent CCTA before catheter angiography (CA) with CTO-PCI were retrospectively enrolled in this study. The RECHARGECCTA scores were calculated and compared with RECHARGECA and other CTA-based prediction scores, including Multicenter CTO Registry of Japan (J-CTO), CT Registry of CTO Revascularisation (CT-RECTOR), and Korean Multicenter CTO CT Registry (KCCT) scores. Results: The procedural success rate of the CTO-PCI procedures was 72%, and 61% of cases achieved the 30-minutes wire crossing. No significant difference was observed between the RECHARGECCTA score and the RECHARGECA score for procedural success (median 2 vs. median 2, p = 0.084). However, the RECHARGECCTA score was higher than the RECHARGECA score for the 30-minutes wire crossing (median 2 vs. median 1.5, p = 0.001). The areas under the curve (AUCs) of the RECHARGECCTA and RECHARGECA scores for predicting procedural success showed no statistical significance (0.718 vs. 0.757, p = 0.655). The sensitivity, specificity, positive predictive value, and the negative predictive value of the RECHARGECCTA scores of ≤ 2 for predictive procedural success were 78%, 60%, 43%, and 87%, respectively. The RECHARGECCTA score showed a discriminative performance that was comparable to those of the other CTA-based prediction scores (AUC = 0.718 vs. 0.665-0.717, all p > 0.05). Conclusion: The non-invasive RECHARGECCTA score performs better than the invasive determination for the prediction of the 30-minutes wire crossing of CTO-PCI. However, the RECHARGECCTA score may not replace other CTA-based prediction scores for predicting CTO-PCI success.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.28-28
• /
• 2015

Clubroot disease caused by Plasmodiophora brassicae induces severe losses of cruciferous vegetables worldwide. To control clubroot of Chinese cabbage, many CR (clubroot resistance) F1 hybrid cultivars have been bred and released in Korea, China and Japan. In this study, we determined the race of P. brassicae 12 field isolates, which collected from 10 regions in Korea, using Williams' differential varieties including two cabbage ('Jersey Queen', 'Badger Shipper') and two rutabaga ('Laurentian', 'Whilhelmsburger'). By Williams' differential varieties, 12 clubroot pathogens were assigned into one (GN2), two (HS and YC), two (HN1 and HN2), three (DJ, KS and SS) and four (GS, GN1, JS and PC) isolates for races 1, 2, 4, 5 and 9, respectively. In addition, the degree of resistance of 45 CR cultivars that were from Korea, China and Japan was tested with the 12 isolates. The 45 CR cultivars of Chinese cabbage were differentiated into three genotypes according to their resistance responses. Even though the 12 P. brassicae isolates were same race by Williams' differential varieties, three CR genotypes showed different resistance response to the isolates. These results indicate that races of P. brassicae by Williams' differentials were not related with resistance of CR cultivars, and three CR genotypes represented qualitative resistance to the P. brassicae isolates. CR genotype I including 'CR-Cheongrok' showed resistance to GN1, GN2, JS, GS, HS, DJ and KS isolates and susceptibility to YC, PC, HN1, HN2 and SS isolates. And CR genotype II such as 'Hangkunjongbyungdaebaekchae' was resistant to GN1, GN2, JS, GS, HS, YC, PC and HN1 and susceptible to DJ, KS, SS and HN2. CR genotype III including 'Chunhajangkun' and 'Akimeki' represented resistance to 10 isolates except for SS and HN2 isolates. Based on these results, we selected 'CR-Cheongrok', 'Hangkunjongbyungdaebaekchae', and 'Chunhajangkun' as a representative cultivar of three CR genotypes and 'Norangkimjang' as a susceptible cultivar. Furthermore, we investigated the resistance of 15 lines of Chinese cabbage, which were provided by seed companies, to 11 isolates except for HN1 of P. brassicae. The results showed that three lines were susceptible to all the tested isolates, whereas five, four, and three lines represented the similar responses corresponding to the CR genotypes I, II, and III, respectively; there is no line of Chinese cabbage showing different resistance patterns compared to three CR genotypes. In particular, line 'SS001' showing resistance responses of CR genotype II was a parent of 'Saerona' that have been commercialized as a CR $F_1$ cultivar of Chinese cabbage. Together, we divided 12 isolates of P. brassicae into 4 races, designated by wild type, mutant type 1, mutant type 2, and mutant type 3. Wild type including GN1, GN2, JS, GS, and HS isolates of P. brassicae was not able to infect all the cultivars of three CR genotypes, whereas, mutant type 3 such as SS and HN2 isolates developed severe clubroot disease on all the CR genotype cultivars. To mutant type 1 including DJ and KS isolates, CR genotypes I, II and III were resistant, susceptible and resistant, respectively. In contrast, to mutant type 2 including YC, PS, and HN1 isolates, CR genotypes I, II and III showed susceptibility, resistance and resistance, respectively. Taken together, our results provide the extended knowledge of classification of P. brassicae races, which is useful information for the breeding of resistant crops, with a suggestion that 'Norangkimjang', 'CR-Cheongrok', 'Saerona' and 'Chunhajangkun' cultivars of Chinese cabbage could be used as new race differentials of P. brassicae for clubroot disease assay.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.456-468
• /
• 2008

This study was performed to evaluate the quality of newly offered dentin bonding system($AdheSE^{(R)}$ One) by comparing the degree of microleakage measured with those of several conventional adhesive materials(AQ Bond Plus and $Adper^{TM}$ Single Bond 2). The quality of hybrid layer and resin tags was analyzed by observing restoration/ tooth interface under SEM. All-in-one system is in the limelight for having advantage of reducing chair time of children with difficult behavior pattern. Therefore the possibility of clinical application of All-in-one system was evaluated. The results obtained are as follows; 1. At the enamel margin, group II(AQ Bond Plus) showed the highest value of microleakage, and the other groups showed decreased value in order of group III($AdheSE^{(R)}$ One) and I($Adper^{TM}$ Single Bond 2). There was statistically significant difference between group II and the others(p<0.05), and no statistical difference was found between group I and III. 2. At the dentin margin, microleakage value was increased in order of group II, I, III and significant difference between all groups(p<0.05). 3. In group I and III, microleakage value measured at the enamel margin was significantly lower than that seen at the dentin margin(p<0.05), and there was no statistical difference in group II. 4. Resin tags observed under SEM were very weak and tangled in group II and III while the strong and thick tags were observed in group I. In conclusion, careful case selection and accurate clinical application is recommended in using AQ Bond Plus and $AdheSE^{(R)}$ One, giving consideration of the results showing its higher microleakage and weaker strength than $Adper^{TM}$ Single Bond 2.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.105-115
• /
• 2008

Statement of problem: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. Purpose: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. Material and methods: The material included a ormocer-based composite resin ($Admira^{(R)}$ & $Admira^{(R)}$ Flow); a nanohybrid composite resin ($Grandio^{(R)}$ & $Grandio^{(R)}$ Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification ${\times}$ 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. Conclusion: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.19-26
• /
• 2017

Objectives: In the Lung, the VMAT rotates continuously and examines radiation. That increases the low doses to normal lung. Due to that, the incidence of radiation pneumonia among radiation side effects may increase. The cause of radiation pneumonia is the lower dose area of the lungs. The H-VMAT was applied to patients who applied to reduce radiation in the lower doses of the lungs. We wanted to assess the usefulness of the H-VMAT by comparing the radiation doses to the low dose areas of the lungs and the normal organs. Materials and Methods: A total of 26 patients who applied for a H-VMAT procedure were applied to the patient. The prescription dose applied to total dose 44 Gy from 22 divisions. For each patient, a plan was implemented with Conventional RT, VMAT and H-VMAT. Conventional RT was carried out in four to five fields each, considering the size, location, shape, and location of the PTV. In the case of a VMAT plan, the two Half ARC, three Half ARC method and the two Full ARC were planned. The H-VMAT was planned by adding two Static fields in the VMAT, taking into account the dose of the lung and the tolerance dose of the organs. Results: In the NSCLC, the lung doses $V_5$ and $V_{10}$ of the lungs except for the treatment plan volume were the lowest with $55.40{\pm}13.39%$ and $32.05{\pm}11.37%$ of H-VMAT. And, in the SCLC, the lung doses of V5 and V10 were the lowest at $64.32{\pm}16.15%$ and $35.50{\pm}9.91%$, respectively. The spinal dose of VMAT in NSCLC was $21.15{\pm}4.02Gy$, which was 7.94 Gy lower than other treatment methods. The lowest spinal dose was delivered at $19.72{\pm}1.82Gy$ for SCLC. The mean dose delivered to the esophagus was also $17.44{\pm}2.04Gy$ and $17.84{\pm}9.20Gy$ in SCLC and NSCLC, respectively. Conclusion: When comparing the value of the surrounding normal organ dose, the VMAT showed that less doses were transmitted from the heart, esophagus and spinal cord than the rest of the treatment plan. However, it was similar to VMAT in normal organs except for the spinal cord. VMAT has increased doses of some normal organs but did not exceed the tolerance dose. It showed a low value in $V_5$, $V_{10}$. When comparing Conventional RT, VMAT, and H-VMAT, If the dose to the heart, esophagus and spinal cord is lower than the tolerance dose, it is thought to reduce the incidence of radiation pneumonia by applying H-VMAT that show the benefits of low doses of the lungs.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.1-9
• /
• 1983

This study was conducted to obtain basic information on the rice anther culture. Materials used were (Inabawase X YR 2404-14-2-1) $F_1$ hybrid. Callus growth rate on various media, induction frequency of callus in spikelet and panicle, and the effect of treatment on anther and callus were evaluated. The results obtained were summarized as follows ; The growth rate of callus on N-6, M-S, P.E.agar media was 19.8, 13.1, 4.1 times respectively after 30 days inoculated, and on liquid media was 3.8, 5.1, 1.4 times, respectively. Organ differentiation on N-6, M-S, P.E.agar media was 37.5%, 12.5%, 17.5% respectively. The difference of induction frequency of callus per panicle was 0.14%-6.25% and per spikelet was 0-19.05%. Almost callus was induced 30-35 days after inoculation. Organ differentiation of induced callus was decreased by culture. Callus cultured for 13 days after induction did not make shoot. Anthers cold shocked at $8^{\circ}C$ for 5 days obtained 3.32% efficiencys of callus induction per number of anthers plated, and compared with 2.41% of no treated anthers. But anther treated at $8^{\circ}C$ for 7 days decreased 2.24%. Callus induction periods were shortened by cold treatment for about 5 days. Callus cultured on medium containing 2 mg/l of 2, 4-D showed 5% on root formation but medium containing 5 mg/l of 2, 4-D showed 30% of root formation after transfered on the medium without 2, 4-D. Callus cold shocked at $15-18^{\circ}C$ revealed poor efficiency for root formation, but 5 days treatment was good for shoot formation.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.117-122
• /
• 2013

BACKGROUND: The scab, which is caused by Venturia nashicola, gives serious damages to pear trees. 'Niitaka' accounts for 82% of areas in pear cultivation. However 'Niitaka' is a scab susceptible cultivar. So, most of Korean farmers who growing pear trees have suffered by economic losses with the scab. In this research, we evaluated the scab resistance among elite pear seedlings to clarify genetics about the scab resistance. And we analyzed photosynthetic features with these seedlings to develop suitable cultivar which is advantageous for producing quality fruits during the growth and development of plants. METHODS AND RESULTS: We measured the rates of scab incidence among seedlings in a field experiment condition and an in-vitro test. An in-vitro test has been done with field experiment-based results. We made plant materials by grafting branches of each seedlings with 'Kongbae' rootstocks. And they had been grown for one month. Then, scab conidia suspension is sprayed to seedlings and sustained for 40 days under the controlled environment. As the results, 6 seedlings displayed lower incidence rates than other seedlings and 'Niitaka'. We also measured instant photosynthetic rates of each seedlings to determine the correlation between photosynthetic rates and fruit characteristics. However, it seemed that there is no correlation between them. CONCLUSION(S): Among the seedlings, 6 seedlings displayed the higher resistance to scab than other seedlings and 'Niitaka'. This characteristics is considered to be come from the gene expression of European pear. And we found that photosynthetic rate in trees rarely does not influence the fruit characteristics. It is considered to be affected by cultivar's own characteristics.