• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1101-1111
• /
• 2018

This study aims to present accurate soil modeling and validation of a single roadside guardrail post as well as a single concrete pile installed near cut slopes or compacted sloping embankment. The conventional Winkler's elastic spring model and p-y curve approach for horizontal ground cannot directly be applied to sloping ground where ultimate soil resistance is significantly dependent on ground inclination. In this study, both grid-based 3-D FE model and particle-based SPH (smoothed particle hydrodynamics) model available in LS-DYNA have been adopted to predict the static behavior of a laterally loaded guardrail post. The SPH model has potential to eliminate any artificial soil stiffness due to the deterioration of the node-connected Lagrangian soil mesh. For this purpose, this study comprises two parts. Firstly, only 3-D FE modeling has been tested to show the numerical validity for a single concrete pile in sloping ground using Mohr-Coulomb material. However, this material option cannot be implemented for SPH elements. Nevertheless, Mohr-Coulomb model has been used since this material model requires six input soil data that can be obtained from the comparative papers in literatures. Secondly, this work is extended to compute the lateral resistance of a guardrail post located near the slope using the hybrid approach that combines Lagrange FE elements and SPH elements by the suitable node-merging option provided by LS-DYNA. For this analysis, the FHWA soil material developed for application to road-base soils has been used and also allows the application of SPH element.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.60-66
• /
• 2010

Zinc has a number of characteristics that make it well suited for use as a coating to protecting iron and steel products from corrosion. Its excellent corrosion resistance in most environments accounts for its successful use as a protective coating on a variety of products and in many exposure conditions. The excellent field performance of zinc coatings results from their ability to form dense, adherent films that corrode at a rate that ranges from 1% to 10% of the corrosion rate of ferrous materials, depending on the environment. Recently, EU RoHS and EU ELV prohibited the use of materials that adversely affect the environment, such as Pb, Hg, Cd, and $Cr^{+6}$. In this study, environmentally-friendly, Cr-free solutions (epoxy solution, acrylic solution, and urethane solution S-700) and organic/inorganic solution with Si; LRO-317) were used to evaluate the corrosion resistance of zinc-coated steel subjected to a saltwater spray for 72 hours. The coating of urethane solution (S-700) was best among the three kinds of solution with heat treatment during five minutes at $190^{\circ}F$. Test specimens with S-700 and LRO-317 coating were heat treated in a drying oven at 170, 180, 190, 200, and $210^{\circ}C$ for five minutes. The results show that the optimum corrosion resistance was $190^{\circ}C$ in EGI and $170^{\circ}C$ in HDGI, respectively.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.512-515
• /
• 2009

In this paper, we propose layout based multimodal contents authoring tool for Digilog Book. In authoring step, users create a virtual area using mouse or pen-type device and select property of the area repetitively. After finishing authoring step, system recognizes printed page number and generate page layout including areas and property information. Page layout is represented as a scene graph and stored as XML format. Digilog Book viewer loads stored page layout and analyze properties then augment virtual contents or execute functions based on area. Users can author visual and auditory contents easily by using hybrid interface. In AR environment, system provides area templates in order to help creating area. In addition, proposed authoring tool separates page recognition module from page tracking module. So, it is possible to author many pages using only single marker. As a result of experiment, we showed proposed authoring tool has reasonable performance time in AR environment. We expect that proposed authoring tool would be applicable to many fields such as education and publication.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.69-73
• /
• 2013

This study is about the secondary concentration technology using electrodialysis process for minimum discharge and maximize recovery ratio from seawater desalination by reverse osmosis process. The experimental method adopted the constant voltage driving method and, concentrated/desalination volume capacity ratio changes, voltage changes and electrolyte types. Multi-ion membrane is used, aiming to derive conditions to minimize the TDS concentration of desalination water, to minimize the volumes of secnodary concentraion water and minimizing the power efficiency. The results of this study are as follows. The optimal ratio of concentraion/desalination volume is 1:5, the final TDS concentration of desalinated water is 5.32g/l, the final secnodary concentrated water salinity is 17.07% and electric energy demands of desalinated water is $16.74kWh/m^3$.

• Journal of the Korean association of regional geographers
• /
• v.13 no.1
• /
• pp.82-103
• /
• 2007

Neoliberalism can be seen as a path-dependent, hybrid and contradictory project that operates actually (not just ideologically) through intervention of the state that has been not weakened in its strength but different in its strategies, especially through neoliberal policies of remaking urban space. This paper seeks to characterize the development of neoliberalism and urban policies in S. Korea, by examining the trajectory of neoliberalism generated in its contextually specific way since the late 1980s, by illuminating the intersection between new neoliberal programs and the existing developmentalism of the state and changes in spatial policy with its effects, which can be divided into two phases: the first from the late 1980s to the economic crisis in 1997, and the second from the crisis to the present. This paper finally identifies several paths in which the state and the market would be interrelated, and argues that the vision of national development and spatial policy should be welfare(i.e. human)-oriented, not industry(i.e. capital)-oriented.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.28-31
• /
• 2002

Filmless full-PACS in korea has rapidly been growing, since government had supported collaborative PACS project between industry and university hospital in late of 1995. At the same time, a small company had started PACS business, while the Korea PACS society was being formed. In the beginning, PACS societies had focused on developing peripheral solutions such as DICOM gateway for image acquisition, x-ray film digitizer, and viewing software for research or management of personal image data, while Samsung Medical Center had started installing an imported partial PACS system which had recently upgraded with a new system. In similar time frame, a few hospitals had started developing and installing domestic large scale full-PACS system. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. It is believed that Korea is the first country that adopted PACS reimbursement for filmless full-PACS as a national policy. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are currently three types of PACS system which includes domestic, imported, and hybrid PACS system with imported solution for core system and domestic solution for peripheral system. There are more than 20 domestic PACS companies and they have now enough experiences so that they are capable of installing a truly full-PACS system for large-scale teaching hospitals. PACS societies in Korea understand how to design, implement, install, manage, sustain, and provide good services for large-scale full-PACS. PACS society has also strength for the highest integration technology of the Hospital Information. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.1
• /
• pp.9-13
• /
• 2014

Nowadays, among several reasons for customers to choose their own cars, NVH performance plays much important role. The concern for the car interior noise is increasing recently, because electric cars and hybrid cars generate less engine noise which was the main noise of traditional cars. According to oversea references, high Lateral Dynamic Stiffness (LDS) of vehicle wheels is described to reduce Structure Bone Noise (SBN) which is being generated while driving cars. However availablet test standards and test results are not enough, in this study the interior noise has been measured after attaching a same tyre to several wheels which has different Lateral Dynamic Stiffness. The test has verified that the interior noise differs depending on Lateral Dynamic Stiffness of wheels. As to this, the reduction of the interior noise can be possible with the optimal design of the wheel.

• Journal of Korean Academy of Nursing
• /
• v.29 no.3
• /
• pp.467-484
• /
• 1999

The main objectives of this study were to investigate the concept of family function from the perspective of the contemporary Korean family, and to construct model of change of family function with chronic illness. The hybrid model approach was applied in which three phases(theoretical phase, empirical phase, and analytic phase) of concept development were explored for family functioning. The study was conducted from 1997 to 1998. In empirical phase, two groups of purposive samples were drawn : normal family group composed of six families without ill family member, and ill family group composed of seven families of which wives have rheumatoid arthritis. Only families with child(or children) in primary or secondary schools were included in the study. The results were as follows : In theoretical phase, six dimensions of family concept were emerged : affective, structural, control, cognitive, financial, and reproductive dimension. In order to analyse the Korean normal family function in middle class with middle-aged women, financial and reproductive dimension were not included. In empirical phase, five dimensions(affective, structural, control, cognitive, and external relationship) were found from the normal family data. External relationship dimension is very important factor as a resource of the support, especially when their parents or siblings had no help or support to them. In the affective dimension, Korean family emphasized harmony and balance rather than affective expression between couples and between parents and children. They also showed common goals of the families to solve their problems to control the family members. The priority of the goals was getting into the higher education of their children or helping their unhealthy parents or family members. Six dimensions (affective, structural, control, cognitive, external relationship, and financial) of family functions were emerged from the ill family data. From the analysis of ill family data, types of restructuring house chore after wives illness were developed : (a) negociated, (b) accomodated, and (c) isolated, enduring types. Although the dimensions of family functioning identified in this study are similar to the conceptualizations that exist in the western literature, there were distinct differences in the nature of major themes and subconcepts under these family function dimensions.