• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.17-22
• /
• 2015

A total of CNU 28 hybrids were developed at the CNU Corn Breeding Lab. were evaluated to identify new cultivars in botanical characteristics, fresh yield per 10a and taste qualities. Most of these hybrids were stable in environmental stresses such as lodging, disease and insects. Stem height ranged from 115.0 to 239.3 cm, and ear height ranged from 30.7 to 107.0 cm. The ear height to stem height ratio was showed low than 50% of standard as a stable plant type to lodging. The range of ear length was 14.2 cm to 23.0 cm. Especially, CNU 13H-73 was very longest ear as a 23 cm. The fresh yield per 10a was high in purple of CNU13H-79 hybrid than control hybrid Miheuckchal, and CNU13H-73 in white hybrid was similar Yeonnong check hybrid. The 100-kernel weights in CNU13H-3 and CNU13H-9 hybrids were higher than that of the control hybrid. CNU13H-98 among hybrids had a 100-kernel weight of 20.32 g, which was heavier than that of the control hybrid Daehackchal Gold 1. The average pericarp thickness was $41.4{\mu}m$, CNU13H-46 among hybrids had a very thin pericarp as a $35.5{\mu}m$. The mean sugar content of the used hybrids was 14.95 brix%; CNU13H-73 and CNU13H-55 had higher than Mibak2 as a control hybrid.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.87-91
• /
• 2013

The major characteristics of the developed corn hybrids were compared at each different planting time; 1st time(April 28) and 2nd time(August 20), respectively. Among traits surveyed, stem height showed highly at 1st time than 2nd, while ear height, stem diameter and ear length were similar at two times. Sugar content of the used hybrids showed highly at 2nd planting time than 1st. Pericarp thickness was also high at 2nd planting time. Especially, among hybrids CNU99 was the highest in stem height and ear length, CNU11 and CNU56 were high in sugar content, and CNU51 and CNU124 were thiner than other hybrids in pericarp thickness. Accordingly, these hybrids will be planted and recognized in 2nd yield trial for superior corn hybrid selection.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.123-127
• /
• 2009

This study was carried out to gain the informations about seedling transplanting cultivation of Daehakchal Gold 1 which was developed at the Corn Breed. and Genetics Lab., Coll. of Life and Sci., Chungnam Nat'l Univ. in 2009. This hybrid and Check were sowed over four times at intervals of 10 days from 15th April(1st) to 30th May(last) and transplanted at CNU Corn Breed. Farm the 20th seedling cultivated after sowing, respectively. Results obtained from this experiment were as follows; stem height of this hybrid were variable regardless of sowing and transplanting times, while ear height was gradually increased according to delay of sowing times. Ear size and sharp of fresh corn as one of important traits was good at 2nd harvest times, while tip filling of ear harvested at 1st time was not good and also it's size decreased according to delay of transplanting stage. Stability of this hybrid expressed as ratio of stem height to ear height was very good as 50% below. Accordingly, the proper sowing and transplanting times of Daehackchal Gold 1 considered the late in April to early in May as harvesting proper period.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.2
• /
• pp.99-109
• /
• 1985

The present studies were carried out to obtain some basic informations of the breeding of tobacco varieties. Genetically divergent 8 varieties, 3 flue-cured, 2 burley and 3 sun-cured tobaccos, were used in half diallel cross. In order to analyze the heterosis, combining abilities, modes of inheritance and correlations for some agronomic and chemical characters, 8 parents and 28 $F_1$ were tested. The results obtained were summarized as follows: The percentages of heterosis for stem diameter, internode length and total sugar content in $F_1$ hybrid were 3.6%, 3.1% and 10.6%, whereas these for days to flower, total alkaloids and leaves per plant were -6.3%, -6.9% and -5.0%, respectively. Yield had significant positive genotypic correlations with plant height, days to flower and leaf length, but negative with internode length and total sugar content. It also had significant prositive phenotypic correlations with plant height, days to flower, leaves per plant, leaf length, leaf width and leaf shape index (Leaf length/leaf width). General (GCA) and specific combining abilities (SCA) for all characters of $F_1$ hybrid were significant. The effects of GCA were positive on yield, plant height, stem diameter, leaves per plant and days to flower of Burley 21. And those were positive on yield, leaf shape index and plant height, but negative on leaves per plant and total nitrogen of Hicks. The effects of SCA for yield and leaves per plant were greater than those of others on the combinations of Coker 139 and Burley type, respectively.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.237-251
• /
• 2021

The main purpose of this study is to investigate the performance of the proposed hybrid teaching-learning based optimization algorithm on the optimum design of reinforced concrete (RC) cantilever retaining walls. For this purpose, three different design examples are optimized with 100 independent runs considering continuous and discrete variables. In order to determine the algorithm performance, the optimization results were compared with the outcomes of the nine powerful meta-heuristic algorithms applied to this problem, previously: the big bang-big crunch (BB-BC), the biogeography based optimization (BBO), the flower pollination (FPA), the grey wolf optimization (GWO), the harmony search (HS), the particle swarm optimization (PSO), the teaching-learning based optimization (TLBO), the jaya (JA), and Rao-3 algorithms. Moreover, Rao-1 and Rao-2 algorithms are applied to this design problem for the first time. The objective function is defined as minimizing the total material and labor costs including concrete, steel, and formwork per unit length of the cantilever retaining walls subjected to the requirements of the American Concrete Institute (ACI 318-05). Furthermore, the effects of peak ground acceleration value on minimum total cost is investigated using various stem height, surcharge loads, and backfill slope angle. Finally, the most robust results were obtained by HTLBO with 50 populations. Consequently the optimization results show that, depending on the increase in PGA value, the optimum cost of RC cantilever retaining walls increases smoothly with the stem height but increases rapidly with the surcharge loads and backfill slope angle.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.197-201
• /
• 2011

This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.1-6
• /
• 2011

Daeduckchal 1 waxy corn hybrid including check was planted and compared with domestic leading vatiety on agronomic characteristics, traits related to table gualities and crude income. Stem and ear height of Daeduckchal 1 among used hybrids were intermediate and stem diameter was also similar to other hybrids. Days to tasseling of this hybrid needed 56 days which was slightly shorter than check hybrid, Yeonnong. Ear length of CNU-H2 was longer than Yeonnongchal as 21.7 cm, while Chalok 2 was 14.1 cm. Number of tillers per plant of this hybrid were higher than Chalok 2 but lower than Yeonnong. Pericarp thickness of CNU-H2 and CNU-H3 were similar to Yeonnon. In sugar content, Daeduckchal 1 was intermediate level as 11.7 brix(%). Marketability of Daeduckchal 1 was the highest among used hybrids and crude incomes was also high.

• Plant Resources
• /
• v.4 no.1
• /
• pp.31-35
• /
• 2001

Major characteristics of new Waesungri maize inbred line has multi-tiller and ears: five to six tillers and seven to eight ears per plant and flowering date of Waesungri was delayed about 18 and 24 days compared to Mo17 U.S line and IK$_4$ Korean local lines, respectively. Number of ears, fresh and dry weight per plant were significantly different among all tested hybrids including Waesungri/Sinkihong hybrid under different planting times and densities. Especially, both fresh and dry weight of IK$_1$/FR140//Waesungri F$_1$hybrid were significantly higher at high planting density. In kernel weight per unit area, Wnesungri/Sinkihong hybrid was high at high density and IK$_1$/FR140//Waesungri hybrid was high at low planting density. As results of analysis of variance, flowering date was shown a significantly different both planting times and varieties, while other characters including stem height were shown very variable in interactions with enviromental factors.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.7-10
• /
• 2011

In order to develop the new Miscanthus varieties for biomass, characteristics of collected materials were surveyed. Also, they were treated with S-azide(Sodium-azide) and DES(dethyl sulfate) for promising lines and 0.2% Colchicine for polyploidy, respectively. CNU-J1 line induced with chemical, DES and S-azide treatment showed shorter than others in stem height and stem diameter. CNU-N1 line treated with 10 mM DES showed earlier than non-treated lines in flowering as 7days. Among selected lines, the CNU-J1 line was crossed with DB-1 selected as a superior line and their hybrid was expected to be high in biomass than others. Especially, CNU-W1 line treated with 2.5~5.0 mM DES showed heading in M1 generation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.470-474
• /
• 2015

This study was carried out to compare botanical and amylogram characteristics including table quality in waxy corn kernel. The used materials in this experiment were producted and evulated at Corn Breeding Laboratory, Coll. of Agri. & Life Sci., in CNU. In botanical characteristics CNU H09-26 among used hybrids was highest in stem height as 228.5 cm, but that of CNU H09-30 was lowest. Ear height was highest in CNU H09-23 as 78.2 cm, but that of CNU H09-30 was lowest. Ear length among hybrids were also variable as 21.2 cm to 10.8 cm. in amylogram analysis CNU H09-23 hybrid was lowest in pasting temperature, while break down of this hybrid was highest These results appeared highly in table quality. Accordingly we thought that this hybrid will be adapted as a leading variety for edible waxy corn.