• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.228-228
• /
• 2007

전력선 통신용 비접촉식 커플러는 고속형(2~30 MHz)과 저속형(100~450KHz)으로 나누어 볼 수 있는데, 고속형은 현재 국내에서 독자적으로 개발되어 다양한 모델이 적용되고 있는 상황이지만, 저속형은 시작품수준으로 제조되어 있으나 신호전송 특성의 향상절구가 필요한 상황이다. 전력선 통신용 커플러는 전력선 또는 모뎀으로 통신신호를 전달하는 기능을 하는 것으로서, 전력선 통신을 위한 핵심부품이다. 따라서 본 연구에서는 100~450 KHz 대역에서 사용 가능한 저속형 비접촉식 커플러를 제조하기 위해, 권선조건, 대전류형 자심재료의 모의 해석, 노이즈 필터조건, 임피던스 매칭, 하우징방법 등의 각 공정 변수를 확립하고자 하였다. 자심재료의 모의해석에서 자심재료의 높이와 전력선 도체 단면적 변화는 자심재료의 전류포화특성에 영향을 미치지 않으며, 유효길이와 에어-갭 크기가 증가할수록 전류포화특성은 향상되는데, 자심재료의 내경이 64 mm일 때 자심재료의 폭((외경-내경)/2)은 15 mm 이상이어야 하고, 에어-갭은 약 $600\;{\mu}m$ 정도의 에어-갭을 형성시켜야함을 확인할 수 있었다. 또한 저속용 비접촉식 커플러 제조조건 실험에서 내경${\times}$외경${\times}$높이가 $64{\times}94{\times}140mm$인 자심재료를 이용하여 권선 수와 에어-갭을 각각 3회, $400{\sim}600\;{\mu}m$ 삽입했을 때, 가장 우수한 특성을 나타내었다. 그리고 저역 통과 필터를 출력부에 내장하여 통신신호 이외의 노이즈를 제거할 수 있었다. 본 연구에서 제조된 300 A급 지중선용 저속형 비접촉식 커플러는 내경${\times}$외경${\times}$높이가 $58{\times}1144{\times}158mm$이고, 100~450 KHz 통신대역에서 약$7{\pm}2dB$의 삽입손실을 나타내었다.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.2
• /
• pp.71-79
• /
• 2008

We examined 165 unchlorinated natural drinking water samples for the presence of E. coli group resistant to antimicrobial agent and chlorine in nothern Gyeongbuk area in 2007. Among 165 water samples, 21 samples(12.7%) were positive to total coliforms and Six genus, 16 strains of E. coli groups isolated from 16 samples showed resistance against more than one antimicrobial agent such as Ampicillin, Tetracycline and Chloroamphenicol. Among 16 strains, 14 strains resistant to Ampicillin, 9 strains resistant to Tetracycline and one strain resistant to Chloroampenicol. but all 16 strains did not contain any integron gene cassettes, which contribute to the spread of antimicrobial resistance alleles by lateral gene transfer of gene cassettes in a variety of enteric bacteria. The minimal inhibitory concentration(MIC) of 14 strains which showed resistant to Ampicillin was between $12{\mu}g/m{\ell}$ and $32{\mu}g/m{\ell}$, Nine strains resistant to Tetracycline showed between $32{\mu}g/m{\ell}$ and $128{\mu}g/m{\ell}$ and one strain resistant to Chloroampenicol showed $128{\mu}g/m{\ell}$. The chlorine sensitivity of 16 strains isolated from unchlorinated natural water sample did not show any difference among strains by the concentration of initial free chlorine and elapsed time after chlorine treatment. All 16 strains were killed after 1hr. exposure at $0.2mg/m{\ell}$ of free chlorine per liter or 30minutes exposure at $0.4mg/m{\ell}$ of free chlorine per liter.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2013

'Multi-scale mass-deployable cooperative robots' is a next generation robotics paradigm where a large number of robots that vary in size cooperate in a hierarchical fashion to collect information in various environments. While this paradigm can exhibit the effective solution for exploration of the wide area consisting of various types of terrain, its technical maturity is still in its infant state and many technical hurdles should be resolved to realize this paradigm. In this paper, we propose to develop new design and manufacturing methodologies for the multi-scale mass-deployable cooperative robots. In doing so, we present various fundamental technologies in four different research fields. (1) Adaptable design methods consist of compliant mechanisms and hierarchical structures which provide robots with a unified way to overcome various and irregular terrains. (2) Soft composite materials realize the compliancy in these structures. (3) Multi-scale integrative manufacturing techniques are convergence of traditional methods for producing various sized robots assembled by such materials. Finally, (4) the control and communication techniques for the massive swarm robot systems enable multiple functionally simple robots to accomplish the complex job by effective job distribution.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.41-46
• /
• 2012

In this study, poly(ethylene glycol) (PEG) was used as a hydrophilic polymer carrier to develop solid dispersion formulations for enhancing solubility and dissolution rate of pranlukast, one of poorly soluble drugs that has been broadly used for the treatment of asthma. PEG based solid dispersions with or without poloxamer were prepared by hot melting and solvent evaporation methods. The resultant solid dispersions were characterized by DSC and powder X-ray measurements, and their morphological properties were observed to be partially changed to amorphous state with reduced crystallinity. Dissolution and solubility tests showed that the solubility and dissolution rate of the solid dispersions were significantly enhanced. The solid dispersion formulation prepared by the hot melting method with a chemical composition of pranlukast:PEG:poloxamer = 1:5:1 demonstrated the most enhanced solubility and dissolution rate. The results suggest that the solid dispersions based on PEG and poloxamer are promising systems for the enhancement of solubility and bioavailability of pranlukast.

• Archives of Pharmacal Research
• /
• v.18 no.2
• /
• pp.90-99
• /
• 1995

The effect of protein kinase C inhibitors, sturosporine and 1-(5-isoquinolinyl sulfonyl)-2-methyl piperazine(H7) on in vitro differentiation of erythroid progenitor cells which were isolated from spleens of mice infected with the anemia-inducing strain of Friend virus were examined. Erythropoietin-mediated differentitation of erythroid progenitor cells, as determined by the incorporation of $^{59}Fe$ into protoporphyrin, was inhibited by staurosporine and H7 in a concentration -dependent manner. Scatchard analysis of the $^3H-phorbol-12$, 13-dibutyrate binding to erythroid progenitor cells revealed that at the high affinity sites the dissociation constant was 22nM and the maximum number of $^3H-phorbol-12$, 13-dibutyrate binding to erythroid progenitor cells revealed that at the high affinity sites the dissociation constant was 22nM and the maximum number of $^3H-phorbol-12$, 13-dibutyrate binding sites per cell was approximately $3.7\times10^5$. Cytosonic protein kinase C was isolated from erthroid progenitor cells and then purified by sequential column chromatogrphy. Two isoforms of protein kinase C were found. Photoaffinity labeling of the purified protein kinase C samples with $^3H-phorbol-12$12-myristate 13-acetate followed by analysis of SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and autofluorography showed radiolabeled 82-KDa pepticles. Rediolabeling of the 82-KDa peptides with $^3H-phorbol-12$myristate 13-acete was almost completely blocked by excess unlabeled phorbol 12-myristate 13-acetate was almost 12-muristate 13-acetate-promoted phosphorylation with the puyrified protein kinase C samples showed that the phosphorylation of 82-KDa peptides was increased as the concentration of phorbol 12-myristate 13-acetate was increased from $10^{-8}M{\;}to{\;}10^{-4}$M. In light of the findings that erythroid progenitor cells possessed an abundance of protein kinase C and that stauroporine and H7 inhibited erythroid differentiation, it seemed likely that protein kinase C would play a role in the erythroid progenitor cell development.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2019

Virtual Training is an educational exercise in which the environment or the situation is virtually implemented for specific training and proceed like a real situation. In recent years, the virtual reality technology has developed rapidly, and the demand for experiencing situation that are not directly experienced in the real world is increasing more and more in virtual reality. Particularly, there is an increasing demand of contents for hands-on training and virtual training for equipment training that replaces high-risk and high-cost industry training. The virtual training contents have been developed and utilized for the purpose of technical training. However, it is known that virtual training is more effective when it is used as a supplementary training material or combined with e-learning contents rather than replacing one training course with virtual training contents because purpose and effect are different from general technical training course. In this study, we explored the development method for effective utilization of electrohydraulic servo control process, which is the virtual reality contents developed in 2017 in combination with e-learning contents. In addition, in order to establish a teaching and learning strategy, we actually develop and operate a case studies using virtual training contents. Surveys and case studies are conducted to investigate the effects of teaching and learning strategies applied in the classroom on students and their educational usefulness.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.239-245
• /
• 2022

Reduced graphene oxide (rGO) has attracted many attention and applications due to its excellent electrochemical ability. Therefore, standardization of rGO through structural and thermal analysis facilitates quality improvement and management, enabling users to increase efficiency and reduce relevant costs. For rGO and graphene-related materials, it is very important to determine the number of layers and define the resulting difference in physical properties. In this study, 3~4 layers of rGO-1 and 9~10 layers of rGO-2 were obtained from graphene oxide (GO) through a hydrazine reduction process. For the prepared rGOs, X-ray diffraction (XRD) pattern obtained a diffraction peak at 2θ≈25° related to (002) reflection was used to calculate the layer numbers by determining interlayer distance and FWHM value. To reduce the angular uncertainty, XRD data analysis was performed with angle correction using standard reference materials for X-ray powder diffraction analysis. Precise interlayer distance and number of layers were determined using OriginLab and open-source XRD diffraction analysis programs using the angle-corrected diffraction data. TG-DSC thermal analysis was performed to further standardize the physical properties of rGO samples.

• Korean Journal of Plant Resources
• /
• v.35 no.4
• /
• pp.445-454
• /
• 2022

The aim of this study was to provide basic data for breeding new varieties of Angelica gigas Nakai by identifying the growth characteristics and useful components of its below- and above-ground parts. The basic varieties expressing dark purple (N79-A), light blue-pink (62-C), and white (NN115-C) flowers were identified and collected in the cultivation area, and their seeds were cultured for use as experimental materials. Qualitative growth characteristics of the above-ground parts were then examined. Purple coloration was evident throughout the entire plant body in the N79-A group, whereas the 62-C and NN115-C groups displayed yellow-green coloration. In terms of quantitative growth characteristics, the 62-C group displayed significantly lower above- and below-ground growth than the other two groups. Levels of nodakenin and decursinol-angelate were high in the NN115-C group (0.88 ± 0.13%) and N79-A group (2.56 ± 0.12%). However, the overall results were not statistically significant. The results could provide a foundation for breeding new varieties of Angelica gigas Nakai, which are used predominantly for medicinal purposes and have low bolting and high yield potential.

• The Korea Journal of Herbology
• /
• v.38 no.5
• /
• pp.9-19
• /
• 2023

Objectives : Osteoporosis is a systemic skeletal disorder characterized by reduced bone mineral density and increased risk of fractures. Bisphosphonates and selective estrogen receptors, which are bone resorption inhibitors that are currently widely used as osteoporosis treatments, show serious side effects when administered for a long time. Research on bone resorption inhibitors that complement the problems of existing treatments is needed. The purpose of this study was to investigate the effect of inhibiting osteoclast differentiation and activity on the tuberous root of Ampelopsis japonica (Thunb.) Makino (AM). Methods : After extracting AM using distilled water and ethanol, the inhibitory effects of the two solvents on osteoclast differentiation were compared using the RANKL-induced in vitro experimental model and the TRAP assay kit. The impact of AM on bone resorption was investigated through the pit formation assay, and its effect on F-actin formation was assessed through fluorescent staining. Additionally, protein and mRNA expression levels of osteoclast differentiation markers (NFATc1, c-Fos, TRAP and ATP6v0d2) and resorption markers (MMP-9, CTK, and CA2) were analyzed via western blot and RT-PCR. Results : AM treatment significantly decreased the number of TRAP-positive cells and pit formation area. Furthermore, AM suppressed both the protein and mRNA expression of NFATc1 and c-Fos, key transcription factors involved in osteoclast differentiation and it downregulated the expression of osteoclast-associated genes such as TRAP, CTK, MMP-9, CA2, and ATP6v0d2. Conclusions : These results suggest that AM can inhibit bone resorption and osteoclast differentiation, indicating its potential for use in the treatment and prevention of osteoporosis.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.61-73
• /
• 2007

As a part of Load and Resistance Factor Design(LRFD) code development in Korea, in this paper an intensive reliability analysis was performed to evaluate reliability levels of the two static bearing capacity methods for driven steel pipe piles adopted in Korean Standards for Structure Foundations by the representative reliability methods of First Order Reliability Method(FORM) and Monte Carlo Simulation(MCS). The resistance bias factors for the two static design methods were evaluated by comparing the representative measured bearing capacities with the design values. In determination of the representative bearing capacities of driven steel pipe piles, the 58 data sets of static load tests and soil property tests were collected and analyzed. The static bearing capacity formula and the Meyerhof method using N values were applied to the calculation of the expected design bearing capacity of the piles. The two representative reliability methods(FORM, MCS) based computer programs were developed to facilitate the reliability analysis in this study. Mean Value First Order Second Moment(MVFOSM) approach that provides a simple closed-form solution and two advanced methods of FORM and MCS were used to conduct the intensive reliability analysis using the resistance bias factor statistics obtained, and the results were then compared. In addition, a parametric study was conducted to identify the sensibility and the influence of the random variables on the reliability analysis under consideration.