• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.245-255
• /
• 2023

The present paper summarizes the results of an experimental program on the influence of using waste lathe scraps in the concrete mixture on the shear behavior of RC beams with different amounts of shear reinforcement. Three different volumetric ratios (1, 2 and %3) for the scraps and three different stirrup spacings (160, 200 and 270 mm) were adopted in the tests. The shear span-to-depth ratios of the beams were 2.67 and the stirrup spacing exceeded the maximum spacing limit in the building codes to unfold the contribution of lathe scraps to the shear resistances of shear-deficient beams, subject to shear-dominated failure (shear-tension). The experiments depicted that the lathe scraps have a pronounced contribution to the shear strength and load-deflection behavior of RC beams with widely-spaced stirrups. Namely, with the addition of 1%, 2% and 3% waste lathe scraps, the load-bearing capacity escalated by 9.1%, 21.8% and 32.8%, respectively, compared to the reference beam. On the other hand, the contribution of the lathe scraps to the load capacity decreases with decreasing stirrup spacing, since the closely-spaced stirrups bear the shear stresses and render the contribution of the scraps to shear resistance insignificant. The load capacity, deformation ductility index (DDI) and modulus of toughness (MOT) values of the beams were shown to increase with the volumetric fraction of scraps if the stirrups are spaced at about two times the beam depth. For the specimens with a stirrup spacing of about the beam depth, the scraps were found to have no considerable contribution to the load capacity and the deformation capacity beyond the ultimate load. In other words, for lathe scrap contents of 1-3%, the DDI values increased by 5-23% and the MOT values by 63.5-165% with respect to the reference beam with a stirrup spacing of 270 mm. The influence of the lathe scraps to the DDI and MOT values were rather limited and even sometimes negative for the stirrup spacing values of 160 and 200 mm.

• Journal of the Korean Regional Science Association
• /
• v.40 no.1
• /
• pp.89-110
• /
• 2024

REITs are very closely related to real estate management, but there have been no prior studies analyzing the location of REITs assets. Therefore, this study analyzed the location characteristics of REITs assets in two aspects to clarify the location characteristics by using spatial information of REITs assets. First, the characteristics of the type of city where REITs assets are distributed were analyzed, and second, the characteristics of the zoning where REITs assets are distributed were analyzed. As a result of analyzing the characteristics of the city where REITs assets are distributed by type, it was analyzed that in the case of the capital area, both the ratio of cities with REITs assets location and the intensity of REITs assets location (number of REITs assets per city) have location characteristics by city hierarchy in the order of metropolitan city > big city > small and medium-sized city. In the case of non-capital area's metropolitan and large cities, the ratio of REITs assets location cities is similar to that of the capital area, but the location intensity of REITs assets was analyzed to be significantly lower than that of the capital area. As a result of the analysis of REITs assets by type, housing REITs assets tend to be located in the old downtown commercial zoning and the new downtown residential zoning, office REITs assets are characterized by concentration of location in specific commercial zoning of Seoul, and retail REITs assets are located mainly in the old downtown station area. In addition, it was found that logistics REITs assets tend to be located in management zoning, centering on key logistics hub cities in the region.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.129-141
• /
• 2024

This study derived production-production multipliers using a regional input-output table and estimated the induced effect of aggregates through the non-metallic minerals sector and the concrete products sector. In deriving the induced effect of aggregates, it is difficult to use the regional input-output table due to the sector classification problem. This study analyzed the non-metallic mineral sector, including aggregates, as aggregates sector, and the concrete products sector, which uses most of the aggregate production. By analyzing this, we attempted to alleviate difficulties caused by sector classification restrictions. In the process of estimating the induced effect, it was assumed that there was a decrease in aggregate production, and in the process of analyzing the concrete products sector, the effect of the decrease in concrete product production due to the decrease in aggregate production, that is, the decrease in production of one unit of aggregate was 0.8511 in the concrete product sector. The analysis was conducted on the premise of a decrease in unit production. Inducing effects within and between regions were calculated for the 17 metropolitan cities and provinces classified by the regional input-output table. The employment effect was also calculated, assuming a 10% production decrease to show differences according to the size of the aggregate and concrete product sectors in each region.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.128-134
• /
• 2024

Asphalt-based waterproofing materials for bridge decks face issues such as softening or liquefaction of the material during the process of pouring hot asphalt concrete on top of the waterproofing layer. This leads to instability and reduced thickness of the waterproofing layer. To address these problems, new solutions beyond the existing materials, including the development and adoption of new materials, are required. Therefore, this study investigates the properties of MMA(Methyl Methacrylate) coating waterproofing material, which meets the basic physical properties for bridge deck waterproofing. We examined the overall quality standards in a system where the substrate concrete, waterproofing material, and paving layer are integrated. The study confirmed the applicability of MMA coating waterproofing material on bridge decks. The results indicate that a stable application of MMA coating waterproofing material for civil engineering structures' bridge decks can be achieved with a mix ratio of hard MMA resin : soft MMA resin : powder = 6 : 34 : 60. Additionally, when using emulsified asphalt with hardening characteristics for the adhesion between the dissimilar materials of MMA waterproofing and asphalt concrete, it is expected to meet the minimum quality standards of the Ministry of Land, Infrastructure, and Transport's 'Guidelines for Asphalt Concrete Pavement Construction (2021.07)'.

• Steel and Composite Structures
• /
• v.50 no.5
• /
• pp.595-608
• /
• 2024

In this study, aluminum lathe waste was used by replacing aggregates in certain proportions in order to obtain expansive concrete using recycled materials. For this reason, five different aluminum wastes of 1%, 2%, 3%, 4% and 5% were selected and also reference without aluminum waste was produced. Based on the mechanical tests conducted, which included slump, compression, splitting tensile, and flexural tests, it was evident that the workability of the material declined dramatically once the volume ratio of aluminum exceeded 2%. As determined by the compressive strength test (CST), the CS of concrete (1% aluminum lathe wastes replaced with aggregate) was 11% reducer than that of reference concrete. It was noted that the reference concrete's CS values, which did not include aluminum waste, were greater than those of the concrete that contained 5% aluminum. When comparing for splitting tensile strength (STS), it was observed that the results of STS generally follow the parallel inclination as the CS. The reduction in these strengths when 1% aluminum is utilized is less than 10%. These ratios modified 18% when flexural strength (FS) is considered. Therefore, 1% of aluminum waste is recommended to obtain expansive concrete with recycled materials considering minimum loss of strength. Moreover, Scanning Electron Microscope (SEM) analysis was performed and the results also confirm that there was expansion in the aluminum added concrete. The presence of pores throughout the concrete leads to the formation of gaps, resulting in its expansion. Additionally, for practical applications, basic equations were developed to forecast the CS, STS, and FS of the concrete with aluminum lathe waste using the data already available in the literature and the findings of the current study. In conclusion, this study establishes that aluminum lathe wastes are suitable, readily available in significant quantities, locally sourced eco-materials, cost-effective, and might be selected for construction using concrete, striking a balance among financially and ecological considerations.

• Land and Housing Review
• /
• v.6 no.2
• /
• pp.67-77
• /
• 2015

Now that it is the current situation that the smooth supply and demand are necessary for 2nd phase of beginning construction and stable development of Gaesung Industrial Complex, this study was willing to offer the planning criteria and model to establish the lodging for the workers in Gaesung Industrial Complex based on the agreement that both South and North Korea agreed in 2007. Regarding the plan, its standard and the alternative were reviewed considering welfare of workers, economic efficiency, technical validity, possibility of agreement and long-term development. The exclusive area per capita was calculated through Labor Standards Act of Korea and status survey of lodging for the workers provided to border line area between China and North Korea and the economic alternative based on one room for 6 persons with the public restroom was compared with that of development type based on one room for 4 persons with indoor restroom. Especially regarding the proposed site, the area with the optimized position was set by considering gradient, accessibility and convenience of development out of the area of Dongchang-ri where was agreed already and the priority of the proposed site that can keep the existing building site and provide was offered. The necessary period for whole construction was set as approximately 36 months. Regarding construction method, RC Rahmen method was selected as the optimized alternative considering the workmanship of manpower of North Korea and conditions of supply and demand of materials and cluster-type vehicle allocation plan based on 4~6 units considering the efficiency of supplying service facilities and convenient facilities along the simultaneous accommodation of 15,000 people was offered. It was analyzed that total business expenses of approximately 80~100 billion Korean Won would required though there were the difference for each alternative in the charged rental way that the development business owner develops by lending the inter-Korea Cooperation Fund and withdraws the rent by the benefit principle. The possibility of withdrawing the rent was analyzed assuming that the period of withdrawing the investment is 30 years. Especially for the operation management after moving, the establishment of the committee of operating the lodging for the workers of Gaesung Industrial Complex (tentative name) was offered with the dualized governance that the constructor takes charge of operational management, collecting fees and management of infrastructure and human resource management is delegated to North Korea.

• Journal of agricultural medicine and community health
• /
• v.15 no.2
• /
• pp.97-106
• /
• 1990

1. Background Women's health and their involvement in health care are essential to health for everyone. If they are ignorant, malnourished or over-worked, the health &-their families as well as their own health will suffer. Women's health depends on broad considerations beyond medicine. Among other things, it depends upon their work in farming. their subordination to their families, their accepted roles, and poor hygiene with poorly equipped housing and environmental sanitation. 2. Objectives and Contents a. The health status of rural women : physical and mental complaints, experience of pesticides intoxication, Farmer's syndrome, experiences of reproductive health problems. b. participation in and attitudes towards housework and farming c. accessibility of medical care d. status of maternal health : fertility, family planning practice. induced abortion, and maternal care 3. Research method A nationwide field survey, based on stratified random sampling, was conducted during July, 1986. Revised Cornell Medical index(68 out of 195 items). Kawagai's Farmers Syndrome Scale, and self-developed structured questionnaires were used to rural farming wives(n=2.028). aged between 26-55. 4. Characteristics of the respondents mean age : 40.2 marital status : 90.8% married mean no. of household : 4.9 average years of education : 4.7 yrs. average income of household : \235,000 average years of residence in rural area : 36.4 yrs average Working hours(household and farming) : 11 hrs. 23 min 5. Health Status of rural women a. The average number of physical and mental symptoms were 12.4, 4.7, and the rate of complaints were 22.1%, 38.8% each. revealing complaints of mental symptomes higher than physical ones. b. 65.4% of rural women complained of more than 4 symptoms out of 9, indicating farmer's syndrome. 11.9 % experienced pesticide overdue syndrome c. 57.6% of respondents experienced women-specific health problems. d. Age and education of respondents were the variables which affect on the level of their health 6. Utilization of medical services a. The number of symptoms and complaints of respondents were dependent on the distance to where the health-care service is given b. Drug store was the most commonly utilized due to low price and the distance to reach. while nurse practitioners were well utilized when there were nurse practitioner's office in their villages. c. Rural women were internalized their subordination to husbands and children, revealing they are positive(93%) in health-care demand for-them but negative(30%) for themselves d. 33.0% of respondents were habitual drug users, 4.5% were smokers and 32.3% were alcohol drinkers. and 86.3% experienced induced-abortion. But most of them(77.6%) knew that those had negative effects on health. 7. Maternal Health Care a. Practice rate of contraception was 48.1% : female users were 90.9% in permanent and 89.6% in temporary contraception b. Induced abortions were taken mostly at hospital(86.3%), while health centers(4.7%), midwiferies(4.3%). and others(4.5%) including drug stores were listed a few. The repeated numbers of induced abortion seemed affected on the increasing numbers of symptoms and complaints. c. The first pre-natal check-up during first trimester was 41.8%, safe delivery rate was 15.6%, post-natal check-up during two months after delivery. Rural women had no enough rest after delivery revealing average days of rest from home work and farming 8.3 and 17.2. d. 86.6% practised breast feeding, showing younger and more educated mothers depending on artificial milk 8. Recommendations a. To lessen the multiple role over burden housing and sanitary conditions should be improved, and are needed farming machiner es for women and training on the use of them b. Health education should begin at primary school including health behavior and living environment. c. Women should be encouraged to become policy-makers as well as administrators in the field of women specific health affairs. d. Women's health indicators should be developed and women's health surveillance system too.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.111-123
• /
• 2011

A Ubiquitous-Ecological City (U-Eco City) is the new urban paradigm integrated with ubiquitous-city (U-City) connecting the high-tech IT technology to the urvan space with the concept of the sustainable eco-city. As a U-Eco City is attempted for the first time domestically and internationally, there is insufficient discussions for its develoment goal, planned design proposal, technology and service element and others. Even if there are plans to build up it, policy and technology, service structuring business and others, it is difficult to assess how it would bring the efficacy. Therefore, the purpose of this study is to present the indicators system to assess a U-Eco City. The results of this study revealed the following; First, the conceptual framework, which was established to achieve sustainable urban quality, can be suggested by establishing its notion of the U-Eco City. The concept of a U-Eco City as established in this study suggests that the economic development in growth-oriented level has to be conducted not only quality of urban environment but also in terms of sustainable to consider the complex impact of various development; Secondly, the developed assessment system has heightened the completeness as the evaluation index through the attitude survey. As a result of questionnaire survey with the subject of specialists and interested party of this study, the urban qualitative aspect is formulated for the stability as a relatively important aspect. For the urban continuity aspect, society, environment and economy have all similar importance, but the environment element was shown to be highest. And finally, subject area was selected on the basis of the evaluation system and the analysis was made on the basis of the implementation design plan of the area. As a result of the assessment, safety and economy have shown to be high. This is indirectly indicated for the priority in economic growth driven development plan unlike the importance of environmental continuity obtained through the attitude survey. When planning on urban development, there is a need for supplementing the environment part and it has to present the connection plan between the economic growth and environmental continuity.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.369-378
• /
• 2012

In France, there are many forms of organizations based on the intercommunal solidarity for city development and management. The purpose of the collaboration among Communes is to achieve high quality and well-equipped service-delivery system through co-operation of public services needed grand finances : water supply and sewage system and waste disposal system etc. The cooperation among French Communes and its effects, even though these were owing to the existing French local administration system, continued throughout regional co-management and social co-development process. This study suggested some characteristics and implications of the collaborative-style French new-town development and management organizations focused on the EPA, SAN and CA. First, the role of developmental corporation like EPA and its collaborative structure of decision-making are meaningful, because in these ways many related Communes could share a goal of new town development. Second, the way of new town corporation (SAN) is important in the sense of enabling the Communes to collaborate with each others while maintaining autonomy, so those are not simply state-directed objects, which was very difficult in the former French local administration system. Finally, transforming to CA (Communautes d'agglomeration:city community), EPA as an intercommunal corporation is possible to extend its purpose to the domain of regional planning including new town and periphery areas and change its position to a subject which can practice Commune's sustainable development according to stages of city's development and maturity. The most important implication of this study on urban development in Korea is that administrative consultative council or association among local governments and related authorities need to be established and effectively operate because multi-stakeholders could share a goal of urban development and management through that.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.135-155
• /
• 1998

The purpose of this study is to evaluate the environmental sustainability of new town development in metropolitan area, Korea and derive some policy implications for sustainable urban development. The case study area selected for empirical research is Jisan Bummul new town in Taegu. In the part of theoretical review, it is considered that the urban form suitable to sustainable development of a metropolis is the type of decentralized concentration. For the decentralized concentration form, we suggest developing suburban centers with self-sufficiency within a metropolis. This strategy is to develop a few suburban centers on the outskirts of a metropolis to decentralize urban activities of the central city, and to conserve the remaining. The empirical study evaluating the environmental sustainability of new town development shows that Jisan Bummul new town generally have low environmental sustain ability, because of the policy of mass housing provisions without consideration on overall natural conditions and environmental capacity of the area. To develop a new town. we must first select the locational site with minimum possibility of the destruction of natural environment, and then it is necessary to develop new towns into compact form to minimize the destruction of the natural environment. Second, a new town should be developed into a large scale to obtain urban self-sufficiency. Third plans must be established for decentralising both industrial and residential functions of a metropolis simultaneously. As more detailed policy implications, it is suggested that the policies are needed to improve the quality of educational conditions and enhance the level of services of public transport facilities. It is also necessary to establish the comprehensive development plan that takes the adjacent developmental area into consideration, and to prepare various action plans to bring up the facilities of self-sufficiency. In the selection of the location of a new town, the adaptability of public transportation planning must be emphasized. But, to take a program for short-term mass housing provisions must be restricted.