• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2010

A competitive construction project must address factors such as cost, performance, aesthetics, schedule and quality. The importance of these factors will vary from project to project and from market to market. Productivity is becoming an ever-more important factor in the acquisition of a project. As the technology or aesthetics of a product matures or stabilizes, and the competitive playing field levels, competition is increasingly based on time. Recently, the construction industry has been depressed due to difficult market circumstances. At this time in particular, construction companies are striving to rationalize their management, both in their planning offices and in the field. In this study, we present a method of calculating a reasonable duration for reinforced form work. We did this by first developing a question for field workers, then sampling form workers based the question. Second, we employed a work analysis method to analyze worker"s work-methods and Time. Then, using the result of this analysis, we measured the Productivity of form work. This measure can be used as basic data to determine the appropriate duration of form work.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.161-169
• /
• 2017

In this study, sediment transfer and precipitation analysis of the test bed watershed was conducted through the model for the application and practical use of the urban sediment disaster prevention technology, and used this as an aid to design to secure reliability. In addition, conducted the test bed monitoring with the defense technology, analyzed the effect, and established the maintenance plan. Analyzed the change of soil deposition volume through arbitrary slope adjustment for the currently installed stormwater conduit of the test bed watershed. As a result, it is important to reduce the total sedimentation amount in the adjustment of the slope of the entire pipeline, but it is important that the sedimentation depth of each sediment does not rise to such a degree as to threaten the performance of the pipeline. Considering these matters, it is necessary to design the pipeline to prevent the clogging of the soil from the viewpoint of the reliability of the entire pipeline. The sediment disaster defense technology test bed is divided into a new city and an old city, and old city test bed is under construction. The result obtained through the monitoring of the test bed in the new city, sediment disasters such as debris can delay the time to reach the downtown area, and it is possible to secure the golden time, such as evacuation and rescue through the warning system. Also, the maintenance of the test bed application was suggested. Continuous and systematic monitoring is required for securing the reliability of element technology and successful commercialization.

• Korea Real Estate Review
• /
• v.28 no.3
• /
• pp.65-77
• /
• 2018

The purpose of this study is to analyze the effect of the educational environment on the prices of studio apartments, known as officetels, in Korea. Since the revision of relevant laws in 2010, they have served as substitutes for residential purposes in areas suffering from housing shortage, especially where the educational environment is a significant factor. To assess the relation between the educational environment and rental rates, the hedonic price model and artificial neural networks were implemented. The national assessment of the academic performance of middle and high schools that were closest to each officetel, and the ratio of students going to special-purpose schools and private high schools were considered as independent variables. Research findings indicated that the positive effect of the dependent variable increased as the value of educational environment-related variables increased. This result could be utilized as a functional index for housing providers after considering educational environments.

• Land and Housing Review
• /
• v.13 no.4
• /
• pp.105-114
• /
• 2022

Non-fire activated fire alarms caused by such actions as cigarette smoke, cooking, and high humidity are fire safety risk factors. In such instances, it is important to quickly locate and replace the actuated detector. However, it is difficult to locate those detectors because most do not have an address function. While new apartments can incorporate addressable fire alarm detectors, in existing apartments there are limitations in converting over to addressable detectors due to cost and power line issues. This study developed an efficient address function for fire alarms in existing apartments. The newly developed system consists of the existing receiver, and a proposed addressable repeater and detector. Utilizing an experimental setup, the performance of the proposed address monitoring system was confirmed to be stable and compatible with the receiver and existing detectors.

• Land and Housing Review
• /
• v.11 no.4
• /
• pp.93-98
• /
• 2020

This study examined the particulate removal performance of three different types of air filters inside a heat exchanger. Of interest was the ability of each filter type in reducing the transmission of outdoor particulate matter of PM10 from entering an apartment while the heat exchanger was in operation. The study tested one commonly used medium filter (E11 grade) and two HEPA filters (H13 grade) of different thicknesses. Two different concentrations of particulate matter were used in the experiment to address different ambient air quality conditions in Korea, 32.75 ㎍/㎥ and 67.26 ㎍/㎥. Study results indicated that under the particulate matter concentration of 32.75 ㎍/㎥, all three filters were capable of removing more than 95% of the fine dust. However at a particulate matter concentration of 67.26 ㎍/㎥, the medium E11 grade filter was only able to remove about 90% of the particulates whereas the HEPA H13 grade filters were able to remove 95% or more of the particulates. The thicker HEPA filter (40T) was also more effective in removing particulates than the thinner HEPA filter (20T) by about 1.6 to 3 percentage points. Based on the findings of this study, it is recommended that HEPA filters of 20T thickness or greater be used during the high air pollution seasons of winter and spring in Korea while medium filters can be used during the other seasons to reduce outdoor air pollution transmission indoors.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.107-113
• /
• 2022

With increasing airtight building construction aimed at reducing energy consumption, indoor relative humidity is increasing which can lead to condensation and moisture damage in multi-family residential buildings. This has led to increased implementation of mechanical ventilation to control indoor moisture. However mechanical ventilation systems consume additional energy and generate noise. As this leads to occupant discomfort, it is necessary to select a ventilation system that addresses the energy and noise issues. This research measured the ventilation performance, energy consumption, and noise level of mechanical ventilation devices in multi-family residential buildings. TOPSIS, a multi-criteria decision making technique was used to determine appropriate ventilation strategies in addition to occupant ventilation system operation preference.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.218-225
• /
• 2022

For hydrogen-vehicle applications (air pressure control valve housing, APCVH), an investigation was conducted to determine how micro-defects in a high- pressure die-casted Al alloy (industrial code: ALDC12) could be controlled by means of a post-treatment using an organic-based impregnation solution in order to improve the air- tightness of the die-casted Al sample. Two different impregnation solutions were proposed and its test results were compared to a imported product from Japan with respect to the processing variables used. A structural investigation of the components under study was conducted by means of computer tomography and 3D X-ray micro-CT. These observations revealed that the use of the impregnation treatment to seal micro-defects led to highly significant and beneficial changes which were attributed mainly to interconnections among inherent micro-pores. A leak test after impregnation revealed that the performance improvement rate of the die-casted Al sample was ~70% for INNO-01. Therefore, the developed impregnation solutions offer an effective strategy to control the micro-defects found in various vehicle parts via die-casting.

• Land and Housing Review
• /
• v.14 no.1
• /
• pp.99-114
• /
• 2023

This study was conducted to review the adequacy and applicability of the safety certification system for educational facilities which was implemented in 2021 and to derive possible improvements to the existing certification system. This study analyzed the existing certification system, examined similar systems from abroad, conducted interviews with certification experts, and presented the proposed improved system to experts for review and advice. The proposed model replaced the current certification process with three stages of follow-up management. This allows for problems that may occur in the evaluation process and the composition of evaluators to be prevented by applying a feedback system. In the review stage of the newly proposed certification system, certification experts recommended specifying the detailed standards of certification performance such as criteria for selecting examiners and arbitrators. They concluded that there were no fatal flaws in the overall structure of the evaluation system. According to the results of this review, the proposed evaluation system was proven to be an effective improvement to the existing system.

• Land and Housing Review
• /
• v.13 no.2
• /
• pp.125-139
• /
• 2022

For construction companies to become competitive innovative, cost management as well as process improvement are required. Activity-based costing (ABC), which uses cost information to support long-term decision-making, is a tool that enhances a company's competitiveness. In this study, we compare and analyze tradition-based costing (TBC) and ABC to confirm the adequacy of performance-based costing. In addition, we will empirically examine the relationship between the impact of the reward system using ABC on employee satisfaction and involvement. In research results, the influence of the reward system on employee involvement appeared in the order of intrinsic reward (𝛽 = 0.338) and extrinsic reward (𝛽 = 0.308). In addition, the reward system showed positive (+) effects on employee satisfaction, with influence appearing in the order of intrinsic reward (𝛽 = 0.360) and extrinsic reward (𝛽 = 0.337). And employee satisfaction (𝛽 = 0.225) had a positive effect on involvement. We were able to confirm that it is necessary to build a reward system consisting of intrinsic and extrinsic rewards to increase employee satisfaction and involvement.