• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.207-212
• /
• 2011

A hydraulic breaker is an attachment installed at the end of excavator arm and is used for breaking. As per the authors' knowledge, there have been no research results on reducing the weight of the hydraulic breaker even though this weight reduction is very important for improving the performance of the excavator. In this study, we minimize the weight of the housing of the hydraulic breaker under normal operating conditions, while the maximum stress of the housing is lower than the allowable stress. A meta-model, which is generated by using the CAE results for the sampling design points determined by an orthogonal array, is used to solve the minimization problem. The weight of the housing according to the optimal design is found to be lower than the original weight by 4.8% while satisfying the constraint on the maximum stress.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1614-1625
• /
• 2010

Two experiments were conducted to evaluate the use of fish silage prepared from Indian oil sardines, Sardinella longiceps, as partial replacement of soybean meal as a sole source of protein for growing broiler chickens. The main objective of Experiment 1, an ileal digestibility assay, was to assess the nutritional value of fish silage compared with soybean meal for feeding broiler chickens. The two test ingredients, soybean meal and dried fish silage, were incorporated into semi-synthetic diets, as the only component containing protein. The ileal digestibility coefficients of amino acids of fish silage were considerably higher than those of soybean meal (p<0.001). The lower digestibility of amino acids from soybean meal was related to the presence of anti-nutritional factors such as trypsin inhibitors. Fish silage had higher levels of sulphur-containing amino acids than soybean meal. The objective of Experiment 2, a growth study, was to evaluate the effect of feeding fish silage on performance and meat quality characteristics of broiler chickens raised under closed and open-sided housing systems. Four diets containing various levels of fish silage (0, 10, 20 and 30%) were evaluated. Daily feed intake, body weight gain and feed conversion ratio were measured. At the end of Experiment 2, 96 birds were randomly selected and slaughtered to evaluate meat quality characteristics. Housing type had significant effects on feed intake and body weight gain (p<0.01). Birds in the open-sided house consumed 4.7% less amount of feed and gained 10.6% less than their counterparts in a closed house. Birds in both houses fed diets containing 10 and 20% fish silage gained more than birds fed 30% fish silage. The current study produced evidence that fish silage can replace up to 20% of soybean meal in broiler diets without affecting either growth performance or the sensory quality of broiler meat.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.80-89
• /
• 1993

Performance simulation for a Spark Ignition Wankel rotary Engine is presented in this paper. The volume of chamber at each eccentric shaft angle is evaluated by using geometric models of housing and rotor. A thermodynamic model which includes the first law of thermodynamics, combustion and convective heat transfer from chamber contents to surroundings is imployed. A thermochemical equilibrium model which considers 10 species(CO, $CO_2$, $O_2$, $H_2$, $H_2O$, OH, O, NO, $N_2$) in the burned gas region, is also employed. Four processes of gas exchange, compression, combustion and expansion are considered and the pressure, temperature and composition of chamber gas at each eccentric shaft angle in each process are computed in this performance simulation. This performance simulation must be useful for optimal design of Spark Ignition Wankel Rotray Engine with parametric study for various design parameters and operating conditions.

• Journal of Families and Better Life
• /
• v.7 no.2
• /
• pp.1-13
• /
• 1989

The purpose of this stud is : (1) to figure out the amount of time being usually spent on the housework performed by the employed wives and (2) to find out factors influencing the total and the specified housework time. The major findings are the following : 1) A employed wife spends 374 minutes(6.2 hours) on the average a day on the housework. Compared with research results of the past, this shows little difference, and less 157 minutes than full time homeworker. Time connected with meals is 123minutes, clothing (68), management and marketing(64), family care(61), and housing care(58). 2) Family environment variables (the wife's education level, wife's employment status, income, young child's age and presence of employed housekeeper) significantly differentiates the housework time. In general, a wife with higher SES level spends less time for housework except family care. 3) Housework related variables (planning, preference, performance competency, and performance stand rd) significantly differentiate the specified houseworks. High planning, preference, and performance competency do not necessarily diminish the housework time except routine houseworks. High performance standard causes her to spend more time. 4) A wife' sex-role attitudes and a husbands attitudes perceived are more traditional, she spends more time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.368-377
• /
• 2013

The Urea-SCR system commercialized shows a remarkable performance to reduce NOx emission in heavy duty diesel engines. However, Urea-water solution injected upstream a mixer, which is set up inside a exhaust pipe to promote exhaust gas-atomized droplet mixing, bumps up against the wall of a exhaust pipe as the droplets flow downstream through the exhaust gas. The urea deposited on the wall of the exhaust pipe is changed into the Urea-salt, resulting in the decreased life-time of the SCR catalysts. Therefore, the development of the urea deposition avoidance technologies is being treated as an important issue of the Urea-SCR systems. An experimental study was carried out to investigate the effects of the wall flow characteristics around the mixer-housing assembly with the variation of the mixer housing surrounding and supporting the mixer, which is designed to increase the wall flow and then to reduce droplet deposition. The flow characteristics was investigated by using a hot-wire anemometry for 2-D simplified duct model, and the housing tilt angles and the position of the mixer were changed : angle of $0^{\circ}$, $1^{\circ}$, $2^{\circ}$, $3^{\circ}$, and mixer positions of 0L, 0.5L, 1L. The results showed that the wall flow onto the exhaust pipe was improved with changing the tilt angle of the mixer housing, and the wall flow improved more when the position of the mixer was on 1L.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.33-42
• /
• 2013

This study which are recognized that the lack of empirical research about the efficiency of the elements of environmentally friendly housing development planned presented housing design elements and policies to revitalize for the reduction of greenhouse gas emissions by analyzing the effectiveness of reduction of greenhouse gas output. In addition, it used various models of DEA which are accepted until now effective technique to evaluate the performance of the organization. In conclusion, there are effective 5 regionals which are Seoul, Incheon, Ulsan, South Chungcheong Province, South Gyeongsang Province. other regionals was analyzed to be inefficient. The conclusion from this study are as follows: First, in case of 11 regionals which are analyzed to be inefficient, they have to difference plan elements to make up. So each region should establish strategy to complement vulnerability. Second, not only internal architectural factors but institutional, and external environmental factors also affect the reduction of greenhouse gas emissions. And weighted scores also were moderately high. But levels of weighted scores still less than the ratio of Good quality housing. So it can be determined that evaluation of individual architecture still considered important. It need to pay more attention to the operating system and the external environmental factors.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.243-260
• /
• 2023

Indonesia has had seismic codes for earthquake-resistant structures designs since 1970 and has been updated five times to the latest in 2019. In updating the Indonesian seismic codes, seismic hazard maps for design also update, and there are changes to the Peak Ground Acceleration (PGA). Indonesian seismic design uses the concept of building performance levels consisting of Immediate occupancy (IO), Life Safety (LS), and Collapse Prevention (CP). Related to this performance level, cases still found that buildings were damaged more than their performance targets after the earthquake. Based on the above issues, this study aims to analyze the performance of base isolation design on existing target buildings and analyze the seismic fragility for a case study in Indonesia. The target building is a prototype design 8-story medium-rise residential building using the reinforced concrete moment frame structure. Seismic fragility analysis uses Incremental Dynamic Analysis (IDA) with Nonlinear Time History Analysis (NLTHA) and eleven selected ground motions based on soil classification, magnitude, fault distance, and earthquake source mechanism. The comparison result of IDA shows a trend of significant performance improvement, with the same performance level target and risk category, the base isolation structure can be used at 1.46-3.20 times higher PGA than the fixed base structure. Then the fragility analysis results show that the fixed base structure has a safety margin of 30% and a base isolation structure of 62.5% from the PGA design. This result is useful for assessing existing buildings or considering a new building's performance.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.489-497
• /
• 2008

Currently, GIS has been widely used in the hedonic analyses of urban apartment housing markets in Korea. In those analyses, the apartment complexes are typically represented as the points or the polygons on the GIS maps and the location variables of the analyses are measured based on the points or the polygons. In this study, the relative performance of the point based approach and the polygon based approach in a GIS based hedonic analysis was compared using the apartment housing market data from the north eastern part of the city of Seoul and Davidson and MacKinnon Test. The results from this study indicate two things. First, two approaches can produce substantially different results in a hedonic price model estimation. Second, the polygon based approach produces a hedonic price model which explains the price variations better than the point based approach. These findings suggest that Korean researchers who are interested in improving quality of hedonic price model estimations and use GIS to measure the location variables for hedonic price models should consider using the polygon based approach with the point based approach. This is because the polygon based approach can produce the location variables with the shortest straight line distances and can explain the housing price variations well.

• Land and Housing Review
• /
• v.7 no.3
• /
• pp.131-136
• /
• 2016

The aim of this study was to improve the performance of hybrid energy harvesting block merge the vibrations and the pressure developed in the previous study. The power generation performance of the energy block improved in this manner was measured and compared with the energy performance of the products previously developed. In previous models, the center has placed a piezoelectric, the two sides had arranged a vibration applying electromagnetic inducing type. Improved model was disposed three in a row of three unit modules for one block. We change the design in the following way. That is, a unit module has been placed the upper piezoelectric body, the lower portion were arranged three electron donation. In laboratory conditions, the power generation performance evaluation results of the improved energy block is as follows. Once when the vibration, power generation was determined to 1.066W. When compared with previous studies, and power generation performance is improved up to 235%. When the vibration in a row 5, power generation was determined to 1.830W. When compared with previous studies, the performance is improved to 177%. The purpose of developing a hybrid energy block is intended to produce electricity by the pressure and vibration when a vehicle passes through the energy block installed in the car park the mouth portion. Electricity produced will try to take advantage of for the purpose of operating a guiding beacon and LED signage in the parking lot entrance. Therefore, it is determined that there is a need in the experiment to compare the performance of the power generation in the field.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.346-351
• /
• 2007

Dedicated outdoor air(DOA) system which conditions the outdoor air separately is superior to conventional cooling+reheating system with respect to energy consumption and indoor comfort. Since the sensible and latent load characteristics of indoor and outdoor are different, it is more efficient to treat them separately. In this study, cycle analysis and on-site performance test of DOA system have been conducted. The study shows that DOA requires 48.8% less equivalent energy that conventional system. The on-site performance test of the prototype shows that the coefficient of performance(COP) of the DOA system is 37.4% higher than the conventional system.