• 제목/요약/키워드: Hot spots

검색결과 252건 처리시간 0.029초

3D NAND 플래시메모리 String에 전열어닐링 적용을 가정한 기계적 안정성 분석 및 개선에 관한 연구 (Study on Improving the Mechanical Stability of 3D NAND Flash Memory String During Electro-Thermal Annealing)

  • 김유진;박준영
    • 한국전기전자재료학회논문지
    • /
    • 제35권3호
    • /
    • pp.246-254
    • /
    • 2022
  • Localized heat can be generated using electrically conductive word-lines built into a 3D NAND flash memory string. The heat anneals the gate dielectric layer and improves the endurance and retention characteristics of memory cells. However, even though the electro-thermal annealing can improve the memory operation, studies to investigate material failures resulting from electro-thermal stress have not been reported yet. In this context, this paper investigated how applying electro-thermal annealing of 3D NAND affected mechanical stability. Hot-spots, which are expected to be mechanically damaged during the electro-thermal annealing, can be determined based on understanding material characteristics such as thermal expansion, thermal conductivity, and electrical conductivity. Finally, several guidelines for improving mechanical stability are provided in terms of bias configuration as well as alternative materials.

Composite components damage tracking and dynamic structural behaviour with AI algorithm

  • Chen, Z.Y.;Peng, Sheng-Hsiang;Meng, Yahui;Wang, Ruei-Yuan;Fu, Qiuli;Chen, Timothy
    • Steel and Composite Structures
    • /
    • 제42권2호
    • /
    • pp.151-159
    • /
    • 2022
  • This study discusses a hypothetical method for tracking the propagation damage of Carbon Reinforced Fiber Plastic (CRFP) components underneath vibration fatigue. The High Cycle Fatigue (HCF) behavior of composite materials was generally not as severe as this of admixture alloys. Each fissure initiation in metal alloys may quickly lead to the opposite. The HCF behavior of composite materials is usually an extended state of continuous degradation between resin and fibers. The increase is that any layer-to-layer contact conditions during delamination opening will cause a dynamic complex response, which may be non-linear and dependent on temperature. Usually resulted from major deformations, it could be properly surveyed by a non-contact investigation system. Here, this article discusses the scanning laser application of that vibrometer to track the propagation damage of CRFP components underneath fatigue vibration loading. Thus, the study purpose is to demonstrate that the investigation method can implement systematically a series of hypothetical means and dynamic characteristics. The application of the relaxation method based on numerical simulation in the Artificial Intelligence (AI) Evolved Bat (EB) strategy to reduce the dynamic response is proved by numerical simulation. Thermal imaging cameras are also measurement parts of the chain and provide information in qualitative about the temperature location of the evolution and hot spots of damage.

Potato Soft Rot Caused by Psychrotolerant Pseudomonas sp. from Subarctic Tundra Soil

  • Sungho Woo;Yung Mi Lee;Dockyu Kim
    • 식물병연구
    • /
    • 제29권4호
    • /
    • pp.399-404
    • /
    • 2023
  • Agricultural activities and the number of farms in the subarctic regions have been increasing annually after the coronavirus disease 2019 pandemic to achieve food self-sufficiency. Potatoes are vulnerable to soft rot bacteria at all stages of production, storage, and transportation. A novel bacterium, Pseudomonas sp. N3-W, isolated from Alaska tundra soil, grows at 5-25℃ and produces extracellular protease(s). N3-W caused necrotic spots (hypersensitivity) in hot pepper leaves and soft rot disease (pathogenicity) in potato tubers. The psychrotolerant N3-W caused significant soft rot symptoms on potatoes at a broad temperature range (5℃, 15℃, and 25℃). In contrast, mesophilic Pectobacterium carotovorum KACC 16999 induced severe rotting symptoms in potatoes at their optimal growth temperature of 15℃ and 25℃. However, it barely produced symptoms at 5℃, which is the appropriate storage and transportation temperature for potatoes. The results of pathogenicity testing imply that psychrotolerant soft rot pathogens from polar regions may cause severe soft rot not only during the crop growing season but also during storage and transportation. Our study indicates the possibility of new plant pathogen emergence and transmission due to the expansion of crop cultivation areas caused by permafrost thawing in response to recent polar warming.

공공데이터를 활용한 지하수자원의 공간적 해석과 문화적 가치부여에 대한 제안 (Analysis of spatial interpretation and cultural valorization of groundwater resource using open data)

  • 최한나;김용철;유정현;이예영;인소정;한종규
    • 한국지리정보학회지
    • /
    • 제25권4호
    • /
    • pp.81-93
    • /
    • 2022
  • 충청권을 비롯한 금강권역은 삼국시대 문화유산과 온천 및 약수와 같은 자연유산이 다수 존재하지만, 소극적 홍보와 시설의 노후화로 신생 대형시설과의 경쟁에서 밀리며 구체적 발전방안을 제시하지 못하고 있다. 이 연구에서는 충청 및 금강권역을 대상으로 지오빅데이터 오픈플랫폼의 지하수 정보를 활용하여 수량 및 수질이 양호한 온천과 약수터를 선정하고, 지하수자원과 문화관광지를 연계한 물문화벨트를 제안하는 것을 목적으로 한다. 이를 위해, 한국지질자원연구원의 지하수 산출유망도와 지하수 수질지수도, 한국관광공사와 문화재청의 공개자료를 활용하여 지하수자원의 공간적 해석과 문화적 가치부여를 시도하였다. 금강권역의 전통온천과 탄산약수, 비탄산약수의 수질은 상당히 양호한 것으로 해석되었으며, 금강권역의 북부지역은 온천과 탄산천이 풍부하여 보양 및 휴양에 중점을 둔 물휴양 산업단지로 개발하는 것이 유리할 것으로 판단된다. 금강 권역 중·남부지역은 수질이 우수한 샘터 및 문화관광시설이 있어 지하수자원과 문화자원을 융합한 개발과 홍보가 가능할 것으로 판단한다.

원격탐사와 공간통계 기법을 이용한 토지피복 분류 및 패턴 분석 - 강원도 DMZ일원을 대상으로 - (Analysis of Land Cover Classification and Pattern Using Remote Sensing and Spatial Statistical Method - Focusing on the DMZ Region in Gangwon-Do -)

  • 나현섭;박정묵;이정수
    • 한국지리정보학회지
    • /
    • 제18권4호
    • /
    • pp.100-118
    • /
    • 2015
  • 본 연구는 위성영상을 이용하여 객체기반 토지피복 분류도를 구축하고 공간통계기법을 통하여 토지피복의 분류항목별 분포패턴을 파악하였다. 객체기반 분류는 분광정보, 질감정보, 분광정보와 질감정보의 조합에 의하여 각각의 토지피복 분류도를 구축하였으며, 정확도 평가를 통하여 최적의 토지피복 분류도를 선정하였다. 또한, 토지피복의 분류항목별 공간적 분포패턴을 파악하기 위하여 핫스팟 분석을 실시하여 정량화하였다. 객체기반 분류를 위한 최적의 가중치는 Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5로 선정하였다. 토지피복 분류도는 분광정보와 질감정보의 조합을 사용하였을 때, 전체 분류정확도가 가장 높았으며, 특히 밭과 시설재배지, 나지의 경우 분광정보만을 사용하였을 때 보다 정확도가 약 12% 이상 증가하였다. DMZ일원의 분류항목별 면적비율은 산림 > 논 > 교통시설 > 초지 > 밭 > 나지 > 건물 > 수역 > 시설재배지 순으로 높았으며, 특히, 양구군의 밭과 교통시설은 민간인통제선 이북지역, 철원군의 밭, 인제군의 산림과 교통시설은 민간인통제선 이남지역에서 주로 분포하는 것으로 나타났다. 분류항목별 분포 패턴의 경우, 농업과 관련된 논, 밭, 시설재배지의 핫스팟(hot spot)은 철원군의 평야 지역과 양구군의 분지 지역에 집중 분포하였다. 나지, 수역, 건물, 도로의 핫스팟 지역은 농업과 관련된 핫스팟 지역과 분포 패턴이 유사한 반면, 산림과 초지의 핫스팟 지역과는 분포 패턴이 상이하였다.

기계학습 기반 상세화를 통한 위성 지표면온도와 환경부 토지피복도를 이용한 열환경 분석: 대구광역시를 중심으로 (Thermal Characteristics of Daegu using Land Cover Data and Satellite-derived Surface Temperature Downscaled Based on Machine Learning)

  • 유철희;임정호;박선영;조동진
    • 대한원격탐사학회지
    • /
    • 제33권6_2호
    • /
    • pp.1101-1118
    • /
    • 2017
  • 급격한 도시화와 이상기후의 증가로 도시의 기온이 꾸준히 올라가고 있으며, 한 도시 안에서도 열분포 양상이 지역마다 다르게 나타나고 있어 상세한 도시 열환경 분석이 요구된다. 최근에는 위성자료를 이용한 열환경 분석이 수행되고 있으나, 위성자료는 시 공간해상도의 Trade-off 관계로 인해 정밀한 분석에 어려움이 따른다. 이 연구는 2012년부터 2016년의 대구광역시 여름철 열환경 분석을 위해, MODIS(Moderate Resolution Imaging Spectroradiometer) 1 km 공간해상도의 낮과 밤 지표면온도(낮$LST_{1km}$, 밤$LST_{1km}$)를 250 m 공간해상도(낮$LST_{250m}$, 밤$LST_{250m}$)로 상세화 시켰다. 상세화에는 기계학습 기법인 랜덤 포레스트(Random Forest)가 이용되었다. 향상된 $LST_{250m}$는 기존의 $LST_{1km}$에 비해, 대구광역시 행정동 기준 불투수면적 비율과 지표면온도가 높은 상관관계를 보여주었다. 다음으로, 상세화 된 낮과 밤$LST_{250m}$를 이용하여 Hot Spot 분석을 수행하였다. 대구광역시 행정동 중 낮과 밤 지표면온도가 Hot Spot으로 군집화된 영역을 비교하고, 토지피복도를 이용하여 그 원인을 분석했다. 낮에는 공업 및 상업지역의 비율이 높은 영역에서, 밤의 경우 주거지역의 비율이 높은 영역에서 높은 Hot Spot이 군집 되었다. 본 연구의 열환경 분석 접근은 향후 도시정책 수립 및 국민안전에 큰 기여를 할 수 있을 것으로 기대된다.

벼, 콩, 고추의 생육시간별 인공 산성비에 대한 내성 (Tolerance of Rice, Soybean, and Hot Pepper to Simulated Acid Rain at Different Growth Stages)

  • 이석순;김태주;김복진
    • 한국작물학회지
    • /
    • 제39권6호
    • /
    • pp.548-555
    • /
    • 1994
  • 작물의 생육시기별 산성비에 대한 내성과 피해양상을 알기 위하여 벼, 콩, 고추 3개 작물을 영양생장기-수확기 또는 생식생장기-수확기에 pH2.7의 인공산성비를 10mm씩 2일 간격으로 처리한 후 작물의 생육, 수량 및 수량구성요소, 작물의 피해양상, 식물체 중 엽록소, 질소, 황 등을 분석한 결과를 요약하면 다음과 같다. 1. 인공산성비에 대한 잎의 가시적 피해는 벼 < 고추 < 콩의 순으로 컸으며, 생식생장기-수확기 처리보다 영양생장기-수확기 처리에서 피해가 더 심했다. 피해증상은 벼는 갈색반점, 콩은 황화현상과 갈색반점, 고추는 작은 갈색반점이나 구멍이 생겼다. 2. 생식생장기에 조사한 벼, 콩, 고추의 엽록소 함량은 모두 pH 2.7 인공산성비의 영양생장기-수확기 처리 < 생식생장기-수확기 처리 < 무처리 순으로 높았으나 광합성 능력은 차이가 없었다. 3. 질소 함량은 벼에서는 인공산성비 처리간에 차이가 없었으나 콩과 고추에서는 영양생장기-수확기 처리에서 생식생장기-수확기 처리 혹은 무처리보다 질소 함량과 흡수량이 많았다. 4. 황 함량은 벼, 콩, 고추에서 모두 차이가 없었으나 흡수량은 벼 와 콩에서는 인공산성비 처리 기간이 길수록 많았다. 5. 벼와 콩의 수량은 pH 2.7 인공산성비의 영향을 받지 않았지만 벼는 영양생장기-수확기 처리에서 임실률, 등숙률, 1,000립중이 감소하였다. 고추는 주당 과실수와 과중의 감소로 수량은 영양생장기-수확기 처리 < 생식생장기-수확기처리 < 무처리 순으로 높았다. 6. 인공산성비를 개화기에 1회 처리할 때 벼는 pH2.3이하에서 영화에 갈색반점이 생기며, 콩과 고추는 각각 pH 1.7 및 2.0에서 꽃잎은 시드나 과실은 생장하였다. 인공산성비의 pH가 2.6에서 1.7까지 낮아질 때 콩은 협당립수가 감소하였으나 벼의 임실률과 고추의 착과율은 영향을 받지 않았다.

  • PDF

지역내총생산과 지역총소득 비교를 통한 소득의 역외 유출 분석 (Analysis of Regional Income Outflows through Comparing GRDP and GRNI)

  • 정재준
    • 한국경제지리학회지
    • /
    • 제21권4호
    • /
    • pp.321-334
    • /
    • 2018
  • 국가 내 지역불균형 발전의 원인 중 하나는 지역 내 생산액 또는 지역의 부가 지역 외로 유출되는 것이다. 본 연구는 우리나라 시군구의 지역내총생산(GRDP)과 지역총소득(GRNI)을 비교하여 지역의 생산액 유출 현상을 분석하고자 하는 것을 목적으로 한다. 시군구 단위의 지역총소득은 지방소득세 자료를 이용하여 추정하였으며 이를 지역내총생산과 비교하여 시군구 단위의 생산액 유출을 분석하였다. 연구의 결론은 다음과 같다. 첫째, 지역내총생산 보다 지역총소득의 지역적 집중 현상이 뚜렷함을 알 수 있었다. Moran / 분석과 Local Moran / 분석을 통해 지역내총생산 보다 지역총소득 데이터에서 공간적 자기상관이 뚜렷하고, 공간적 클러스터가 두드러짐을 알 수 있었다. 둘째, 소수의 지역으로 지역내총생산의 유출이 집중됨을 알 수 있었다. 약 80%의 시군구에서 순유출이 발생하였고, 순유출이 큰 지역은 제조업이 발달한 도시였으며, 군지역이 대부분인 순유출 비율 상위 20위 지역에서는 지역내총생산의 70-80%의 생산액이 유출되었다. 순유입이 큰 지역은 기업의 본사가 위치한 서울을 비롯한 대도시 일부 지역이었으며, 서울의 서초구, 용산구, 강남구 등은 순유입의 규모가 지역내총생산액의 90% 이상일 정도로 순유입 비율이 높았다.

안전도시 조성을 위한 범죄의 공간적 분포와 도시의 장소별 발생특성 분석 (Analysis of Spatial Crime Pattern and Place Occurrence Characteristics for Building a Safe City)

  • 허선영;문태헌
    • 한국지리정보학회지
    • /
    • 제15권4호
    • /
    • pp.78-89
    • /
    • 2012
  • 본 연구는 범죄발생 자료를 이용하여 시계열적으로 공간적 분포특성을 파악하고, 범죄발생 장소의 공간적 환경 특성을 분석함으로써 도시공간의 물리적인 환경 개선을 통한 범죄예방 가능성을 타진해 보는데 목적이 있다. 사례도시의 범죄자료는 지리정보시스템을 이용하여 공간데이터로 변환하여 사용하였다. 범죄발생의 공간분석을 통해 향후 범죄발생 지역의 변화를 확인하고, 환경설계나 도시계획으로 범죄를 예방할 수 있는 방안을 제시하였다. 구체적으로 2008년과 2011년 2개년 동안 범죄발생의 공간적 분포 패턴을 분석해 본 결과 국지적인 핫스팟의 이동이 발견되었다. 또한 상업지역을 중심으로 도로를 따라 선형으로 범죄 다발지역이 형성되고, 블록의 내부보다 도로변의 환경개선과 범죄예방 전략이 중요함을 알 수 있었다. 이외에도 사례지역을 위험지역과 안전지역으로 분류하고, 안전한 도시 만들기를 위해 도시계획 관점에서 접근하는 것도 필요함을 지적하였다. 연구의 결과는 도시의 물리적 환경개선으로 근본적인 범죄예방을 도모하고 그 결과로서 안전도시를 만드는데 기여할 것이다.

유조선 종통보강재와 횡늑골 연결부의 피로강도 평가용 자동화 시스템 개발 (Development of Evaluation System for Fatigue Strength on the Connection Between Longitudinals and Transverse Web)

  • 홍기섭;김성찬;안재욱;김성기
    • 대한조선학회논문집
    • /
    • 제46권5호
    • /
    • pp.510-519
    • /
    • 2009
  • Ship structure is composed of the welded mixture members which are plate and stiffeners. Ship structure is also influenced by variable loadings such as wave and inertia load. There have been several fatigue damage problems on the connection between longitudinal and transverse web due to wide usage of high tensile steel and adoption of wide web space to improve shipbuilding productivity. It is impossible to estimate the fatigue lives for all connection details through refined fatigue analysis. It is necessary to use the simplified approach for the fatigue life estimation of the connection details. PLUS analysis, which is suggested by the classification society, is one of the simplified approaches and is widely adopted to get fatigue lives for the connection details along whole cargo hold area. However, ship building yards still have difficulties to get fatigue lives due to large amount of calculation and time even if this approach reduce the time and amount of calculation. This paper treats the computing system developed to reduce efforts of estimating the fatigue lives. The influence factors of mean shear stress and local dynamic pressure are easily calculated and fatigue lives for all hot spots can be estimated automatically by the developed computing system. It is possible to reduce computing time and efforts to get the fatigue lives for the connection details between longitudinals and transverse webs along the ship. This system was applied to get fatigue lives on the connection details of a VLCC and verified the availability.