• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.207-214
• /
• 2003

The fatigue behaviour of six different hollow section T-joints subjected to out-of-plane bending moment was investigated experimentally using scaled steel models. The joints had circular brace members and rectangular chord members. Hot spot stresses and the stress concentration factors. (SCFs) were determined experimentally. Fatigue testing was carried out under constant amplitude loading in air. The test results have been statistically evaluated, and show that the experimental SCF values for circular-to-rectangular (CHS-to-RHS) hollow section joints were found to be below those of circular-to-circular (CHS-to-CHS) hollow section joints. The fatigue strength, referred to experimental hot spot stress, was in reasonably good agreement with referred fatigue design codes for tubular joints.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.451-451
• /
• 2000

This study aims for the optimization of process conditions in a fixed-bed catalytic reactor system with a circulating molten salt bath, in which partial oxidation of propylene to acrolein takes place. Two-dimensional pseudo-homogeneous model is adopted with estimation of suitable parameters and its validity is corroborated by comparing simulation result with experimental data. The temperature of the molten salt and the feed composition are found to exercise significant influence on the yield of acrolein and the magnitude of hot spot. The temperature of the molten salt is usually kept constant. This study, however, suggests that the temperature of the molten salt must be axially adjusted so that the abrupt peak of hot spot should not appear near the reactor entrance. The yield of acrolein is maximized and the position and the magnitude of hot spot are optimized by the method of the iterative dynamic programming (IDP).

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.91-93
• /
• 2005

The purpose of this study is to evaluate effects of stiffener configuration welded to the plate on the fatigue strength. Nominal stress and hot spot stress for the stiffened plate under pure bending condition were evaluated using FEA and experiment and fatigue test for each specimen was performed. For S and SD type, the fatigue strength increase with a decrease in the nominal stress and hot spot stress. D type with doubler plate was found to have the lowest value of nominal and hot spot stress for a given condition. However its fatigue strength was smaller than the others.

• ETRI Journal
• /
• 제33권6호
• /
• pp.880-886
• /
• 2011

With the introduction of high-current 8-inch solar cells, conventional Schottky bypass diodes, usually adopted in photovoltaic (PV) panels to prevent the hot spot phenomenon, are becoming ineffective as they cause relatively high voltage drops with associated undue power consumption. In this paper, we present the architecture of an active circuit that reduces the aforementioned power dissipation by profitably replacing the bypass diode through a power MOS switch with its embedded driving circuitry. Experimental prototypes were fabricated and tested, showing that the proposed solution allows a reduction of the power dissipation by more than 70% compared to conventional Schottky diodes. The whole circuit does not require a dedicated DC power and is fully compatible with standard CMOS technologies. This enables its integration, even directly on the panel, thereby opening new scenarios for next generation PV systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.964-968
• /
• 2008

Infrared thermography using high-speed infrared camera has been recognized as a powerful method for various potential applications, such as nondestructive inspection, failure analysis, stress analysis, and medical fields, due to non-contact, high-speed, and high spatial resolution at various temperature ranges. In this investigation, damage evolution due to generation of hot spots on railway brake disc was investigated using the infrared thermography method. A high-speed infrared camera was used to measure the surface temperature of brake disc as well as for in-situ monitoring of hot spot evolution. From the thermographic images, the observed hot spots and thermal damage of railway brake disc during braking operation were qualitatively analyzed. Moreover, in this investigation, the previous experimental and theoretical studies on hot spots phenomenon were reviewed, and the current experimental results were introduced and compared with theoretical prediction.

• 대한수의학회지
• /
• 제42권2호
• /
• pp.269-275
• /
• 2002

The aim of this study was to investigate the usefulness and effectiveness of thermography in horse. Total 21 horses associated with locomotors, wound, and ophthalmic disease were investigated. Thermographically, the wannest area in normal limb was coronary band ($27.26^{\circ}C$), and carpus, metacarpus, fetlock, and pastern area were $26.64^{\circ}C$, $24.42^{\circ}C$, $23.64^{\circ}C$ and $23.06^{\circ}C$, respectively. The temperature($^{\circ}C$) of horses with lameness, swelling, nervous, ataxia was lower(cold spot) than surrounding tissue or symmetry area, and with heat, signs of inflammation was increased(hot spot). These results suggest that the thermography is useful for the early detection of locomotors, wound, and ophthalmic disease in horse and an excellent adjunct to clinical examination.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.425-431
• /
• 2011

차량 제동시 디스크와 패드사이의 미끄럼 접촉에 의해 발생하는 마찰열은 재질의 열 탄성 변형을 일으키고, 이는 접촉면의 압력 분포에 영향을 끼친다. 이러한 열탄성 불안정성 (Thermo-Elastic Instability, TEI)은 디스크의 고유 진동모드와 결합되어 열섬 현상 및 열간 저더 진동을 발생시킨다. 본 연구에서는 상용 유한 요소 해석 프로그램인 SAMCEF 를 이용하여 자동차용 통풍식 디스크에 대한 3 차원 열간 저더 해석을 수행하였다. Staggered approach 에 의거한 중간 처리기를 이용하여 구조-동역학 해석 결과와 열 전달 해석 결과를 교환하였다. 디스크 표면에 열섬이 발생하는 것을 확인하였고, 이를 디스크 고유 진동 모드와 비교함으로써 모드 형상과 열섬 분포의 관계를 분석하였다.

• 한국지리정보학회지
• /
• 제21권1호
• /
• pp.115-127
• /
• 2018

본 연구는 경상남도 김해시를 사례지역으로 선정하여, 열환경을 지속적으로 개선하기 위한 바람길 관리 방안을 제시하고자 한다. 이를 위해, Landsat 8 위성영상자료 및 공간통계 분석을 통해 김해시 열섬의 Hot spot과 Cool spot 지역을 도출하고, 김해시의 열환경 취약지역을 파악하였다. 또한, 기상청에서 제공하는 풍력자원지도를 활용하여 김해시 바람길의 풍향 및 풍속을 분석을 하였다. 그 결과, Hot spot 지역인 진영읍, 진례면, 주촌면, 도심지 일대가 바람이 약한 지역과 유사한 것으로 나타났으며, 이는 도시의 기온과 바람 형성이 지형 및 토지이용의 변화에 따라 영향을 많이 받기 때문인 것으로 판단된다. 분석을 바탕으로 김해시의 바람길 관리 전략을 제시하면 다음과 같다. Hot spot 지역과 바람이 약한 지역에는 공통적으로 농업 및 공업단지가 분포하고 있었는데, 산업단지가 조성되어 있거나 조성중인 진영읍과 진례면에서 Hot spot 지역이 확대 강화될 우려가 있으므로, 바람길을 고려한 도시 및 건축계획이 요구된다. 산업단지 및 농공단지가 위치해 있는 주촌면은 고층 아파트 및 주촌선천지구 도시개발지구가 들어설 예정이므로, 현재에도 취약한 열환경이 향후 더 악화될 수 있으므로 이를 고려한 계획이 요구된다. 본 연구를 바탕으로 기후친화적 도시개발을 위한 바람길 계획을 수립하여 도시기본계획뿐만 아니라 도시재생 및 환경계획 분야에서 활용할 수 있을 것으로 기대한다. 또한, 김해시의 기후변화 적응계획 수립을 위한 기초자료 및 기후친화적인 도시개발을 위한 평가시스템을 구축하는데 적용할 수 있을 것으로 기대한다.

• Journal of Astronomy and Space Sciences
• /
• 제20권2호
• /
• pp.123-132
• /
• 2003

1995년 11월부터 1999년 12월까지 총 10일간 W형 접촉쌍성 AB And를 소백산천문대의 61cm 망원경과 BVR필터를 사용하여 CCD 측광관측을 수행하였다. 우리의 관측으로부터 AB And의 1995, 1996그리고 1999년에 걸친 년도별 광도곡선을 완성하였고, 8개의 새로운 극심시각을 결정하였다. 새로 얻은 광도곡선은 AB And가 지난 5년 동안 심한 광도변화를 겪어왔음을 보여주고 있다. 기준 광도곡선으로 선정된 1996년의 광도곡선을 Wilson-Devinney쌍성모델의 접촉모드에 적용하여 AB And의 측광해를 구하였다. 이 분석에서 광도변화의 원인을 흑점에 의한 것으로 가정하여 시스템 인자들을 산출한 후, 단지 흑점만을 조정인자로 하여 1995년과 1999년 광도곡선을 분석하였다. 그 결과, 우리는 광도변화가 반성 표면 위에 hot spot과 cool spot가 동시에 존재해서 일어난다고 해석하였다. 반성 표면 위의 hot spot는 이재우(1999)가 제안한 질량교환에 의한 것으로 유추할 수 있다.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.251-258
• /
• 2023

This study (1) explored spatio-temporal population distribution patterns in Jeonju by using emerging hot spot analysis and (2) identified the influential factors to determine the spatio-temporal patterns by using multinomial logit model. The major findings are as follows. First, the results of emerging hot spot analysis indicated that the 100*100m grid in the urban area of Jeonju was found to have a category of hot spots, whereas most of the cold spot series was concentrated in the outskirts of the city. Also, new towns such as Jeonju Eco City, Jeonbuk Innovation City, and Hyocheon District were persistent or intensifying hot spots, Third, the results of multinomial logit model revealed that the factors influencing deterrmining the spatio-temporal patterns were accessibility to schools, hospitals, parks, and walfare services. This study offered a deeper understanding of urbanization and regional changes in Jeonju, and important information for urban planning.