• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.371-380
• /
• 2004

The history of the glasses can say that we began with the development of the typography. Glasses were made for the first time from the skin which they tied. We came to make the rim as the horn tree afterwards or bone. And the snail glasses make the lens as the modification or glass and to put to connect the two to large snail was developed. The rim after he brought lots of style change. The development of the Bridge and eyewear form of the Temple of an entry today began to come out. The development of and various design and material. We reached practical style. development of design concentration new fashion trend lead can make it eyewear company and designer's. A rim of various style through historical development course because we have a present time's rim analysis. We try to try to investigate a method element of the glass design with a final cause form of the design in the viewpoint of the facility.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.101-108
• /
• 2006

This paper describes the design, fabrication, and measured results of a W-band Cassegrain antenna suitable for the target detecting fuze sensor. The Cassegrain antenna is designed using MATLAB and MWS of CST. We use the multi-mode horn antenna as a feeder. The measurement results are as follows: The gain is about 41dB; SLL is 17.7dB; 3dB beamwidth is about $1.51^{\circ}$ in E-plane and $1.45^{\circ}$ in H-plane. The magnitude of leakage signals is about 43.5mVpp when the fabricated antenna and the transceiver of the fuze sensor ire combined. As a result, the designed W-band Cassegrain antenna could be quite applicable to the target detecting fuze sensor.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.142-154
• /
• 2003

This study was conducted on the costume of the 6 minorities dwelling in Guizhou Province of China. The result of the study is summarized as follows. As Guizhou Province yields much silver, most of the minorities used silver ornaments a lot and dyed their garments by using indigo extracted from plants that grow in the area. The headdress was of style that for both men and women a long cloth is wound around a head in various ways. In some cases, women used cow's horn, pearl and silver ornaments. Most wore a short upper garment such as blouses with overlapping necks or blouses with diagonal on the front, and as a lower garment men and women wore trousers and skirts, respectively. As a way of ornament, embroidering, wax printing and weaving were commonly used, but pattern and color used in the ornament varied depending on the individual minorities.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.1
• /
• pp.8-14
• /
• 2004

An O-mode Ultrashort Pulse Reflectometry (USPR) system has been designed and developed for the measurement of electron density profiles on the Sustained Spheromak Physics Experiment (SSPX) spheromak. In the original design of SSPX, peak densities were envisioned to be in the range of 0.5-3${\times}$10$^{14}$ cm$^{-3}$ . The total duration of formation and sustained discharges is typically ∼2 msec. Moreover, diagnostic access on SSPX is severely restricted. Such high density and short duration plasmas coupled with stringent diagnostic access are quite challenging for conventional reflectometer systems. In USPR, the SSPX diagnostic requirements have been successfully satisfied by employing up-converting mixers and monostatic horn/waveguide configuration. As a result, the USPR system has proven its applicability for the density measurement of a future fusion device. In the density profile measurements, the USPR system is capable of routinely generating density profiles with a temporal resolution of 57 $\mu$s. This paper presents details regarding the USPR fundamental principles, associated subsystems and laboratory tests as well as the experimental results obtained on SSPX

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.67-79
• /
• 1997

We have designed the quasi optics of the dual channel receiver to observe the radio sources with 100GHz-band and 150GHz-band simultaneously. We introduced the general quasi optics and the relation between the Gaussian beam and thin lens approximation. We determined the parameters of the quasi optic components to match the beam waist at cassegrain focus with that of feed horn well.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.9-15
• /
• 2011

The microstrip reflectarray antenna is rapidly becoming an attractive alternative solution to the traditional parabolic reflector antenna. However, the bandwidth of the microstrip reflectarray using the single layer structure is very narrow. To obtain wide bandwidth characteristic, the microstrip reflectarray using the multi-layer structure has been used, but it has some disadvantages such as high cost and complicated design. In this paper, to obtain low cost and wide bandwidth, the microstrip reflectarray antenna composed of square patch with two U-slots using the single-layer structure is proposed. The proposed antenna demonstrate radiation efficiency closed to 55.5 % and 1 dB gain bandwidth over 14 % at 12.5 GHz.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1427-1432
• /
• 2016

In order to preserve the traditional garden landscape and maintain the harmony between traditional and modern gardens of Inner Mongolia, this study theoretically examined the creation and background elements of Inner Mongolia, and reviewed the nature of the people and the traditional design elements. The results of this study show that: 1) the background factor of traditional garden landscapes was nomadic life in plains, which was a lifestyle of adapting to Mother Nature and promoting mutual existence and survival; 2) Shamanism impacted the views of nature among the ancient Inner Mongolian people; 3) traditional garden landscapes could be categorized into landscapes centered around Mother Nature during the Huns era and those centered around the symbolic landscape during the Genghis Khan era; 4) aesthetic elements of traditional garden landscapes included traditional colors of red, yellow, sky-blue, milky-white, and traditional patterns of external knot, cloud, bull horn, and plain grass. These findings may provide basic data for the creation background and characteristics of traditional garden landscape of Inner Mongolia in the application of the green space design of Inner Mongolia.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.138-149
• /
• 2006

A museum's collections is fundamental factors to construct important activity of museum performing a role as cultural facility for learning, education and research. Therefore, conservation of collections through appropriate environments is previously established in step of planing a museum. Hereby, the purpose of this study is to set up the classification of collections and suggest a useful guidance of the storage division in a domestic museum. The results of this study are as follows. First, the main factors of deterioration are temperature and relative humidity in a museum storage, so classification of collections should be set up according to the objective standards of these factors. Second, the classification of collections can be performed as follow: the group for nonorganic materials subdivide metal, chinaware, earthenware, and jade stone, the group for organic materials subdivide leather hair paper fabric, bone horn shell mound and wood herbage and the group for composed materials. Third, for storage division of a domestic museum, basically has to consider that it is reasonable to plan $4{\sim}5$ storages in metal, jade stone, chinaware earthenware, and organic materials of $1{\sim}2$ units in case of a serial of history like archaeological, antique museum. And in case of folk relics of modern and contemporary arts are collected, it is reasonable to plan over 5 storages add composed materials to foregoing classification.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.58-66
• /
• 2006

This paper proposes an FSS(Frequency Selective Surface) design system that automatically derives design parameters minimally specified by engineers. The proposed system derives optimal design parameters through theory of electromagnetic scattering on FSS, database implemented from real data obtained from practically manufactured FSS, and GA(Genetic Algorithm) for optimizing design parameters. The system, at the first step, searches the best matching FSS within preconstructed DB with given characteristics specified by operators, and then sets initial genes from the searched FSS parameters. GA iterates the optimization process until the system finds the FSS design parameters that matches the characteristics specified by operators. The theory for the electromagnetic scattering on FSS is verified by comparing the simulation results with real data obtained by measuring system composed of horn antenna and receiver. The process for manufacturing the FSS is also included in the paper.