• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.28-33
• /
• 2004

Generally Horn-type rudders have been used for single propeller and single rudder system. The reason is that the rudder torques of Horn-type rudder are smaller than those of Spade rudder with same lift force. But it is found that the rudder cavitation occurs on a Horn-type rudder of fast container ship. In this paper the comparison results of Horn-type and Spade rudders are described. HPMM tests are carried out to compare the effects of two rudder types on the maneuverability of a ship. It is shown that the maneuvering performance of a ship equipped with Horn-type rudder is better than that equipped with Spade rudder by comparing the test results and maneuvering coefficients at scantling condition. The reason is that the movable part area of Horn-type rudder is about 14％ larger than that of Spade rudder with same total area. And the rudder torque of Spade rudder is greater than that of Horn rudder. At ballast condition, however, the effect of rudder type is negligible.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.77-80
• /
• 2006

In recent booming up of the ship building market, the supplying of large scale casting is difficult to keep the delivery schedule for ship yard because of the restrict manufacturer in Korea. And also, it is main cause to rise-up the cost of castings. This paper describes the outline of guidance of optimizing design for Rudder Horn Casting to reduce the risk of the delivery problem to ship yard.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권1호
• /
• pp.70-74
• /
• 2001

본 논문에서는 특수타를 채용한 선박과 일반타를 장착한 선박에 대하여 구속모형시험을 통하여 비교 연구를 실시하였다. 구속모형시험은 일반타가 장착된 경우와 특수타가 장착된 경우에 대하여 수행되었고, 조종수학 모델링은 Abkowitz 수학 모델을 통하여 유체력 미계수를 구하여 조종운동을 시뮬레이션하였다. 연구 결과에 의하면 플랩(Flap) 타를 채택한 경우에 선회성능은 아주 향상되는 것을 확인하였다.

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.1-10
• /
• 2002

선체-프로펠러-타의 상호작용 해석을 반복계산에 의해 수행하였다. 계측된 공칭속도를 입력자료로 하고 보오텍스 링 이론을 이용하여 유효속도를 계산함으로써 선체와 프로펠러사이의 상호작용을 고려하였고, 계산된 유효속도를 입력자료로 하여 프로펠러-타 상호작용을 계산할 수 있는 포텐셜 기저 패널법을 개발하였다. 프로펠러에 의해 타에 유기되는 속도와 반대로 타에 의해 프로펠러에 유기되는 속도는 수렴된 해가 얻어질 때까지 반복 계산하여 타 주위의 정상유동 해석을 수행하였다. 이와 함께 삼성중공업의 대형 캐비테이션 터널에서 L.D.V를 사용하여 프로펠러 및 타 주위의 유동장을 계측하였고 수치계산 결과와 비교하였다. 실선에 설치되고 있는 혼 타주위의 유동장 계산을 위해 gap flow 모델을 적용하였고, 여러 가지 타각에 대한 수치계산을 수행하여 대형캐비테이션 터널에서 계측된 타 표면에서의 압력과 비교하였으며, 계산된 표면 압력 치는 실험 값과 비교적 일치되는 만족스러운 결과를 얻었다.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.101-110
• /
• 2007

Recently, rudder erosion due to cavitation frequently has occurred at large high speed container carriers. Especially, in the case of a horn-type rudder, the rudder erosion is severe around a gap. The gap-flow characteristics are investigated through a computational method to understand the effects of a gap on the cavitation and rudder efficiency. A viscous flow theory utilizing a cavitation model is applied to calculate the flow around idealized 2-dimensional rudder sections in a full scale. The effects of gap clearance and flow-control projection are also investigated. From the computational results, the mass flow rate through a gap is found to be one of the important parameters to affect the cavitation and rudder efficiency.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.27-31
• /
• 1990

양력면(揚力面)의 양력계산(揚力計算)에 흔히 쓰이고 있는 방법(方法)을 크게 나누면 Vortex Lattice 법(法)과 Mode Function법(法)이 있다. 잘 알려진 것 처럼, Vortex Lattice법(法)은 해(解)의 수렴성(收斂性)은 좋으나 계산시간(計算時間)이 많이 걸리는 문제점(問題點)이 있고, Mode Function법(法)은 계산시간(計算時間)은 짧으나 해(解)가 특이(特異)해 지는 경우가 있다. 그러므로 본(本) 논문(論文)에서는 양방법(兩方法)의 장점(長點)들을 살리도록, 양력면(揚力面)을 Span 방향(方向)으로 분할(分割)하고 각(各) Strip Mode Function을 사용하여 Vortex를 분포(分布)시켜, 양력면이론(揚力面理論)으로 양력(揚力)을 계산(計算)하였다. 우선 Horn Type의 반균형타(半均衡舵)에 본(本) 계산법(計算法)을 적용(適用)하여 타직압력(舵直壓力)을 계산(計算)하고 타(舵) 단독시험(單獨試驗)을 병행(竝行)하여 계산법(計算法)의 유용성(有用性)을 검증(檢證)하였다. 그 결과(結果), Stall과 같은 비선형적(非線形的) 유체현상(流體現象)이 일어나지 않는 한(限), 본(本) 계산법(計算法)은 유용(有用)하다는 결론(結論)을 얻었다. 끝으로, 본(本) 계산법(計算法)을 평행(平行)하게 늘어선 한척(隻)의 장방형타(長方形舵)에 적용(適用)하여 두 타(舵) 사이의 상호간섭(相互干涉)도 계산(計算)하였다.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.228-237
• /
• 2007

The flow characteristics around a horn-type rudder behind an operating propeller of a high-speed large container carrier are studied through a numerical method in fully wetted and cavitating flow conditions. The computations are carried out in a small scale ratio of 10.00(gap space=5mm) to consider the gap effects. The Reynolds averaged Navier-Stokes equation for a mixed fluid and vapor transport equation applying cavitation model are solved. The axisymmetry body-force distribution technique is utilized to simulate the flow behind an operating propeller. The gap flow, the three-dimensional flow separation, and the cavitation are the flow characteristics of a horn-type rudder. The pattern of three-dimensional flow separation is analyzed utilizing a topological rule. The various cavity positions predicted by CFD were shown to be very similar to rudder erosion positions in real ship rudder. The effect of a preventing cavitation device, a horizontal guide plate, is also investigated.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.47-51
• /
• 2009

It is well known that a rudder is influential devices to help ship maintain its stable performances, such as a course-keeping and maneuverability. In the procedures of a commercial ship design proper rudder dimensions (area and shape) ensuring better ship maneuverability have been settled in an initial concept design stage performed by a preceding department, without little structural consideration. It is true that there are time discrepancy between an initial design and a structural analysis stage. Therefore structural analysis results would sometimes cause a rudder to modify its dimensions. Most of these cases, however, ship design and performance tests had been finished. In this matter, only limited modifications of redder could be carried out. Besides, these could also cause bad effects on productivity. Finally, it is necessary to develop a new program considering co-relationship between an initial rudder design and a following work, a structural strength analysis, in order to enhance productivity and minimize a rate of redesign procedures.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.422-430
• /
• 2006

The horn and movable parts around the gap of the conventional semi-spade rudder are visualized by high speed CCD camera with the frame rate of 4000 fps (frame per second) to study the unsteady cavity pattern on the rudder surface and gap. In addition, the pressure measurements are conducted on the rudder surface and inside the gap to find out the characteristics of the flow behavior. The rudder without propeller wake is tested at the range of $1.0{\leq}{\sigma}_v\;1.6$ and at the rudder deflection angle of $-8{\leq}{\theta}{\leq}10^{\circ}$. The time resolved cavity images are captured and show strong cavitation around the rudder gap in all deflection angles. As the deflection angle gets larger, the flow separated from the horn surface increases the strength of cavitation. The accelerated flow along the horn decreases its pressure and the separated flow from the horn increases the pressure abruptly. The pressure distribution inside the gap reveals the flow moving from the pressure to suction side. In the negative deflection angle, the turning area on the movable part initiates the flow separation and cavitation on it.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.924-931
• /
• 2009

The two-dimensional turbulent flow around the horn-type rudder has been examined in the present study by using the commercial code FLUENT. The standard ${\kappa}-{\epsilon}$ model is used as a closure relationship. The geometry of horn rudder is based on the NACA 0020 airfoil. The simulations for various angle attack (${\alpha}$) and yaw angle(${\delta}$) are carried out. The effect of Reynolds number is also investigated in this study. The cavitation is more possible when the yaw angle is $6^{\circ}$ and it is more serious as Reynolds number increases.