• 한국방재학회 논문집
• /
• 제9권4호
• /
• pp.29-35
• /
• 2009

본 연구에서는 기본 통계치 비교, K-S 검정 및 상자그림과 같은 통계적 기법을 이용하여 측우기 강우량 관측계열(CWK)과 근대우량계 강우량 관측계열(MRG)에 대해 정량적 동질성 분석을 실시하였다. 측우기 관측계열과 근대우량계 관측계열간의 월별 동질성을 분석하기 위해 월강우량, 월강우량에 대한 해당월 최대 일강우량의 비, 월강우일수, 일강우강도의 4개 강우특성자료 계열을 산정하였고, 이표본 K-S 검정을 통한 분포에 대한 동질성 검정과 상자그림을 이용한 정량적 비교를 수행하였다. 분석 결과 각 분석과정에서 M00은 전체적으로 CWK와 MRG의 월강우일수간 차이에 명확한 통계적 유의성을 보이고 있어 CWK와 MRG 간의 관측정밀도에 차이가 있다고 판단된다. 그러나, CWK와 MRG의 강우량은 상대적으로 유의성이 크지 않은 미소한 차이를 보이고 있는 것으로 나타났다.

• 대기
• /
• 제20권4호
• /
• pp.437-449
• /
• 2010

The relocation effect of observation station (REOS) on the homogeneity of seasonal mean of maximum and minimum temperature, diurnal temperature range (DTR) and relative humidity (RH) was investigated using surface observation data and document file. Twelve stations were selected among the 60 stations which have been operated more than 30 years and relocated over one time. The data from Chunpungryeong station were used as a reference to separate the impacts of station relocation from the effects caused by increased green house gases, urbanization, and others. The REOS was calculated as a difference between REOS of relocated station and REOS of reference station. Although the REOS is clearly dependent on season, meteorological elements, and observing stations, statistically significant impacts are found in many stations, especially the environment of observing station after relocation is greatly changed. As a result, homogeneity of seasonal mean of meteorological elements, especially DTR and RH, is greatly reduced. The results showed that the effect of REOS, along with the effect of urbanization, should be eliminated for the proper estimation of climate change from the analysis of long-term observation data.

• Journal of the Korean Data and Information Science Society
• /
• 제28권6호
• /
• pp.1547-1555
• /
• 2017

This paper studies Bayesian test of homogeneity in contingency tables made by discretizing a continuous variable. Sometimes when we are considering events of interest in small area setup, we can think of discretization approaches about the continuous variable. If we properly discretize the continuous variable, we can find invisible relationships between areas (groups) and a continuous variable of interest. The proper discretization of the continuous variable can support the alternative hypothesis of the homogeneity test in contingency tables even if the null hypothesis was not rejected through k-sample tests involving one-way ANOVA. In other words, the proportions of variables with a particular level can vary from group to group by the discretization. If we discretize the the continuous variable, it can be treated as an analysis of the contingency table. In this case, the chi-squared test is the most commonly employed method. However, further discretization gives rise to more cells in the table. As a result, the count in the cells becomes smaller and the accuracy of the test becomes lower. To prevent this, we can consider the Bayesian approach and apply it to the setup of the homogeneity test.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.528-538
• /
• 1996

A magent console is critical element since its homogeneity is essential to the performance of a nuclear magnetic resonance (NMR) based sensor. Geometry and properties of magnet materials determine the magnetic flux density and homogeneity of the console. This study is carried out to develop a design scheme of the magnet console using ANSYS to reduce the design error of the magnet console compared . To enhance the performance of the magnet console, corner steel was proposed and validated by simulation and manufactured one. The corner steel increased the magnetic flux density (B) by about 1% and enhanced homogeneity by approximately 3 times. There was about 3% difference between simulated and measured B values.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.931-932
• /
• 2006

The microstructures of Ni-containing P/M steels produced by admixed powders or diffusion alloyed powders are usually heterogeneous. To improve the microstructure homogeneity, the effects of Mo and Cr additions in the prealloyed powder form were examined. The results showed that the microstructural homogeneity was improved and superior mechanical properties were achieved with increases in the alloy content, particularly for the Cr. Such a beneficial effect was attained due to the reduction of the repelling effect between Ni and C, as was demonstrated through thermodynamic analysis using the Thermo-Calc software.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.853-864
• /
• 2002

In the analysis of categorical data subject to misclassification errors, the observed cell proportions are adjusted by a misclassification probabilities and estimates of variances are adjusted accordingly. In this case, it is important to determine the extent to which misclassification probabilities are homogeneous within a population. This paper considers methods to evaluate the power of chi-squared tests for homogeneity with complex survey data subject to misclassification errors. Two cases are considered: adjustment with homogeneous misclassification probabilities; adjustment with heterogeneous misclassification probabilities. To estimate misclassification probabilities, logistic regression method is considered.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.44-50
• /
• 2002

The spray characteristics of GDI(Gasoline Direct Injection) injector affects on engine efficiency and emission of a GDI engine. Thus, many researchers have investigated the spray characteristics and the mixture formation of GDI injector. In this study, it was tried to provide the fundamental data for GDl injector design which effects on the spray macroscopic characteristics such as penetration and spray angle. In addition, the mixture formation analyzed by using entropy analysis. The entropy analysis is based on the concept of statistical entropy, and it identifies the degree of homogeneity in the fuel concentration. The results show that as injection pressure increases but as ambient pressure increases, spray penetration decreases and spray angle doesn't affected by increasing injection pressure and ambient temperature. From the entropy analysis results, we could find that the direct diffusion phenomena is a dominant factor in the formation of a homogeneous mixture at downstream of GDI spray especially in vaporizing conditions.

• 농촌지도와개발
• /
• 제28권3호
• /
• pp.153-165
• /
• 2021

This study aims to analyze the difference in production elasticity based on the types of agricultural labor input regarding its qualitative difference in Jeju mandarin production. To estimate the production function of qualityadjusted labor, we have set up a Quality-Adjusted Index based on the market wage of the agricultural field. We have conducted a multiple regression analysis of the newly estimated labor inputs using the Ordinary Least Squares regression. Results show that the production efficiency of aggregate total labor hours (quality-unadjusted labor input) is overestimated compared to quality-adjusted labor with qualitative labor homogeneity. Moreover, by analyzing household labor and employment labor, we have observed that the marginal productivity of household labor exceeds that of employment labor. In conclusion, this study verifies that securing labor input homogeneity is crucial for analyzing agricultural labor hours' economic efficiency accurately.

• 보건행정학회지
• /
• 제23권1호
• /
• pp.44-51
• /
• 2013

Background: This study designed to evaluate the homogeneity of Korean diagnosis related group (KDRG) version 3.4 classification system. Methods: The total 5,921,873 claims data submitted to the Health Insurance Review and Assessment Service during 2010 were used. Both coefficient of variation (CV) and reduction in variance of cost were measured for evaluation. This analysis was divided into before and after trimming outliers at the level of adjacent DRG (ADRG), aged ADRG (AADRG) split by age, and DRG split by complication and comorbidity. Results: At the each three level of ADRG, AADRG, and DRG, there were 38.9%, 38.7%, and 30.0% of which had a CV > 100% in the untrimmed data and there were 1.4%, 1.4%, and 1.9% in the trimmed one. Before trimming outliers, ADRGs explained 52.5% of the variability in resource use, AADRGs did 53.1% and DRGs did 57.1%. The additional explanatory power by age and comorbidity and complication (CC) split were 0.6%p and 4.6%p for each, which were statistically significant. After trimming outliers, ADRGs explained 75.2% of the variability in resource use, AADRGs did 75.6%, and DRGs did 77.1%. The additional explanatory power were 0.4%p and 2.0%p for each, which were statistically significant too. Conclusion: The results demonstrated that KDRG showed high homogeneity within groups and performance after trimming outliers. But there were DRGs CV > 100% after age or CC split and the most contributing factor to high performance of KDRG was the ADRG rather than age or CC split. Therefore, it is recommended that the efforts for improving clinical homogeneity of KDRG such as review of the hierarchical structure of classification systems and classification variables.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.308-311
• /
• 2015

We design a crisscrossed double-layer birdcage (DLBC) coil by modifying the coil geometry of a standard single-layer BC (SLBC) coil to enhance the homogeneity of transmitting magnetic flux density ($B_1{^+}$) along the main magnetic field ($B_0$)-direction for small-animal magnetic resonance imaging (MRI) at 300 MHz. The performance assessment of the crisscrossed DLBC coil is conducted by computational analysis with the finite-difference time domain method (FDTD) and compared with SLBC coil in terms of the $B_1$ and the $B_1{^+}$ distribution. As per the computational calculation studies, the mean value in the two-dimensional $B_1{^+}$ map obtained at the mid-axial slice with the proposed DLBC coil is slightly lower than that obtained with the SLBC coil, but the $B_1{^+}$ value of the DLBC coil in the outermost plane (40 mm away from the central plane) shows improvements of 19.3% and 24.8% over the SLBC coil $B_1{^+}$ value when simulating a spherical phantom and realistic mouse body modeling. These simulation results indicate that, the $B_1{^+}$ homogeneity along the z-direction was improved by using DLBC configuration. Our approach enables $B_1{^+}$ homogeneity improvement along the zdirection, and it can also be applied to ultra-high field (UHF) MRI systems.