• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.53-59
• /
• 2012

Recently, LEE et al. proposed an attribute-based authenticated key agreement protocol over home network, which aimed to support authentication and key agreement between user and home server. However, if the home server is attacked in the protocol, the effects are influenced to the overall home network components severly. Thereby, this paper proposes a new ticket-based authentication protocol using user attributes between user and home devices to solve the problem. The proposed protocol supports the various levels of security to user by diversifying the network accessibility depending on user attribute. Thereby, the protocol could support more secure home network services.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.903-907
• /
• 2004

This paper introduces LnCP(Living Network Control Protocol)-based home network system and proposes high level message which is utilized between LnCP Home network Server and User Control Point. LnCP is very optimized protocol for digital home appliances. Then proposed system and implementation of these ideas are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1300-1304
• /
• 2003

The following paper deals with a control problem of a mobile robot in home network environment. The home network causes the mobile robot to communicate with sensors to get the sensor measurements and to be adapted to the environment changes. To get the improved performance of control of a mobile robot in spite of the change in home network environment, we use the fuzzy inference system with multiple reward reinforcement learning. The multiple reward reinforcement learning enables the mobile robot to consider the multiple control objectives and adapt itself to the change in home network environment. Multiple reward fuzzy Q-learning method is proposed for the multiple reward reinforcement learning. Multiple Q-values are considered and max-min optimization is applied to get the improved fuzzy rule. To show the effectiveness of the proposed method, some simulation results are given, which are performed in home network environment, i.e., LAN, wireless LAN, etc.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.542-545
• /
• 2005

본 연구에서는 Home Network System에서 가전기기들을 제어하고 집안의 상황을 원격지에 있는 사용자에게 전달해 줄 수 있는 Home Network Mobile Robot을 제작하여 보다 더 지능적이고 사용자에게 편리한 Home Network System을 구축한다. 이를 위해 본 논문에서는 실제 Home Network 시스템 하에서의 자율이동 로봇을 고안하였으며 이의 구동을 위해 OS로는 Linux Kernel 2.4를 Porting 하였고, Vision 및 Ethernet 통신이 용이하도록 회로를 설계, 제작하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1445-1451
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for Home Network environment such as HomePNA, IEEE 1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.512-516
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for home Network environment such as HomePNA, IEEE1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.2
• /
• pp.127-131
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other home network via Internet through IGD DCP with control commands of UPnP.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.343-345
• /
• 2003

본 논문에서는 광가입자 액세스망에서 댁내 세대 단자함까지 광케이블이 포설된 FTTH(Fiber To The Home)환경에서 가정내에 광대역 홈서비스를 효과적으로 제공하기 위한 홈게이트웨이 시스템의 배치 및 댁내 배선에 대하여 기술하였다. 본 논문에서는 홈네트워크 구성요소 및 홈게이트웨이 배치 배선 결정 요소를 분석하고, 통신과 방송이 통합된 다양한 멀티미디어 서비스를 효과적으로 제공하기 위하여 주거 형태, 홈네트워크 기술 및 서비스에 따른 FTTH 기반 통합 홈게이트웨이 시스템의 배치 및 홈네트워킹을 위한 배선 방안을 제시하였다.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.560-563
• /
• 2002

This paper proposes a home control system architecture that have network configuration function. The proposed home control system architecture is implemented with partly hardware and software. For implementation of this system architecture, we developed ECONICS which is home automation controller. ECONICS consists of main board and communication modem. This communication modem supply the power line communication. The physical layer and the MAC layer software of EIA 709.1 standard protocol are implemented in communication modem. The upper layer software of EIA 709.1 standard protocol and home configuration software for home network installation, management, diagnostics, control and monitoring are implemented in main board of ECONICS. We verified the commercial feasibility of the proposed system through the home network configuration and operation. As a result, we have concluded that the proposed home control system architecture provides all the key function necessary to easily manage and control home network nodes.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.51-64
• /
• 2002

This paper analyzes performance measures of a Bluetooth_based mobile home network system. The home network system consists of terminals with Bluetooth interfaces, access points (AP), a home PC, and a gateway A mobile host in wireless terminals uses Mobile IP for supporting the mobility This paper considers four types of data traffic, which are new connection traffic, handoff traffic, Internet data traffic, and control data traffic and suggests a queueing system model of the home network system, where the AP and the home PC are modeled as M/G/1 with four priority queues and the gateway is modeled as M/G/1 with a single queue The generation rate and service time of individual traffic influence their performance measures. Based ell the suggested model, we propose the elapsed time of data traffic in terms of the number of cells, the number of Home PCs, arrival rates of four types of traffic and the service rates of AP/Home PCs/Gateway To analyze influences on the elapsed time with respect to arrival rate of four types of traffic, some examples are given.