• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.353-361
• /
• 2012

All current shipyards are using the customized CAD/CAM programs in order to improve the design quality and increase the design efficiency. Even though the data structures for ship design and construction are almost completed, the implementation related to the ship design processes are still in progress so that it has been the main causes of the bottleneck and delay during the middle of design process. In this study, we thought that the hole-plan system would be a good example which is remained to be improved. The people of outfitting division who don't have direct authority to edit the structural panels, should request the hull design division to install the holes for the outfitting equipment. For acceptance, they should calculate the hole position, determine the hole type, and find the intersected contour of panel. After consideration of the hull people, the requested holes are manually installed on the hull structure. As the above, many processes are needed such as communication and discussion between the divisions, drawings for hole-plan, and the consideration for the structural or production compatibility. However this iterative process takes a lot of working time and requires mental pressure to the related people and cross-division conflict. This paper will handle the hole-plan system in detail to automate the series of process and minimize the human efforts and time-consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2012

It is necessary to construct the process automation system to improve the design efficiency and procure the higher design quality on the field of ship building. To construct this system, the shipbuilding companies should improve the 3D CAD/CAM system customized to the ship design and the software about design information management which could solve the conflict problem between the several related design division at the same time. The typical example is the Hole-plan process in the ship-building design. For the request of additional holes from outfitting division, the hull design division checks the compatibility conditions and reflects these holes to the hull panels if acceptable. if not, the requests are rejected and sent back to the outfitting division. These serial processes are not simple and require the tedious communication, discussion, and the complicated drawings. This article gives a basic introduction to the process of hole-plan system and proposes a strategy to automate its process.

• Journal of Environmental Impact Assessment
• /
• v.17 no.3
• /
• pp.167-176
• /
• 2008

Korea has made the rapid economical development under the condition with the high population density and low available land. In this context, conservation of land environment, connected directly with living quality of human, has mostly ignored. Prior Environment Review System(PERS) is the one to investigate the locational validity, environmental impacts, harmony with surrounding environment, from the early stage of administrative plan or development project. PERS was amended to include SEA(Strategic Environment Assessment) system on June 1, 2006. But, several problems, including the loss of administrative ability, cost, and time, have been appeared, since the system is applied to all administrative plans without any distinction and plans or projects are delayed generally. In this study, the weaknesses of PERS were indicated through the comprehensive analysis including literature survey, study of legal and internet database, and the recently published PERS reports. Based on that, the improvement schemes were suggested to be harmonized with the nature of SEA. This study was mainly focused on a PERS for the designation of conservational area of hot-spring wells, conducted by authors.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.4
• /
• pp.33-42
• /
• 2018

In the application of the BIPV system, it is expected that the workability is lowered due to the difficulty in securing the space for wiring in the frame and the performance of the frame due to the wiring hole processing is lowered. Therefore, In this study, we propose a method to improve the wiring of the inner space of the BIPV frame, and through the simulation evaluation process, the thermal and condensation performance are secured by complementing the problems caused by the hole machining, and the time and effort required for BIPV construction are reduced. For this purpose, a wiring treatment method using a flange insertion tube was proposed, and the thermal and condensation performance was evaluated through simulation analysis.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.308-327
• /
• 2004

As use of tunnels and subways increase there also are accidents proportionate to it. Daegu Subway Station fire, Hongjimoon tunnel fire led people to be conscious of disaster protection and as a result, there is a trend to adopt standards for fire protection. Accordingly, this thesis is focused on investigating various fire and water protection related issues for subaqueous tunnel under Ran river. The thesis developed evacuation and disaster prevention plan as fire level increases and have identified the suitability of disaster prevention through evacuation and fire simulation, countermeasure of a water leakage during construction and operation considering the subaqueous tunnel. And we selected EPB shield TBM equipment considering the ground condition and effect of boring hole, and accomplished reasonable water protection design through setting goals using event-tree method, as well as examining model test of boring hole and flooding in heavy rain. Also included structured total system consist of water leakage sensing system, water protection gate, pumping system and fire protection system to respond systematically in emergency.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2021

The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

• KSCI Review
• /
• v.14 no.2
• /
• pp.215-224
• /
• 2006

Regarding a spam attack and the interception that a spinoff is largest among Vulnerability of VoIP at these papers study. Write scenario of a spam attack regarding VoIP Vulnerability, and execute Call spam. Instant Messaging spam, Presence spam attack. A spam attack is succeeded in laboratories, and prove. and confirm damage fact of a user in proposals of a spam interception way of VoIP service, 1) INVITE Request Flood Attack 2) Black/White list, 3) Traceback, 4) Black Hole-Sink Hole, 5) Content Filtering, 6) Consent based Communication, 7) Call act pattern investigation, 8) Reputation System Propose, and prove. Test each interception plan proposed in VoIP networks, and confirm security level of a spam interception. Information protection of VoIP service is enlarged at WiBro, BcN. and to realize Ubiquitous Security through result of research of this paper contribute, and may make.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.241-250
• /
• 2006

Regarding a spam attack and the interception that a spinoff is largest among weakness of VoIP service at these papers study. Write scenario of a spam attack regarding VoIP service, and execute Call spam, Instant Messaging spam, Presence spam attack. A spam attack is succeeded in laboratories, and prove, and confirm damage fact of a user in proposals of a spam interception way of VoIP service, 1) INVITE Request Flood Attack 2) Black/White list, 3) Traceback, 4) Black Hole-Sink Hole, 5) Content Filtering, 6) Consent based Communication, 7) Call act pattern investigation, 8) Reputation System Propose, and prove. Test each interception plan proposed in VoIP networks, and confirm security level of a spam interception. Information protection of VoIP service is enlarged at WiBro, BcN, and to realize Ubiquitous Security through result of research of this paper contribute, and may make.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.4
• /
• pp.207-221
• /
• 2010

This study aim to suggest how alter the korean traditional image design for umbrellas by sublimation transfer digital textile printing. Umbrellas are highly depend on design and made from polyester fiber which is proper item to utilize sublimation transfer digital textile printing. Sublimation transfer digital textile printing system can use computer system to create the delicate high dense images and one full layout through the hole umbrella. It can create distinctive style of design compare with former screen printing umbrella design. As a result of this study, Korean traditional images were adopted and recreated for umbrellas as the modern practical item. 7 of umbrella designs were developed and sample umbrellas could be produced in short period comparing with screen printing process. Through this study, as green printing process, sublimation transfer digital textile printing will be more applied to manufacture high quality textile products along with design development, thus it is expected as an alternative plan to leads growth of umbrella industries.