• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.229.1-229.1
• /
• 2016

본 연구에서는 Hole Transporting Layer(HTL)와 Electron Transporting Layer(ETL)의 두께에 의한 특성을 비교해보기 위해서 각각 0, 10, 20 nm로 HTL, ETL 두께를 달리한 형광 OLED소자를 제작하였다. ETL의 두께가 얇아질수록 $V_{TH}$ 값은 2.5V에서 0.9 V로 낮게 나타났고 소자의 전체 두께와 on voltage는 비례한다는 특성을 발견할 수 있었다. HTL과 ETL이 두꺼울수록 각 layer에서 carrier들의 이동에 delay가 생기고 emission layer에서 표면까지 거리가 생기기 때문이다. ETL의 두께가 두꺼울수록 높은 luminance 값을 나타내는 차이를 보여주고 있다. Hole에 비해 이동도가 작은 electron은 emission layer까지 늦게 전달되어, EML내에서 비교적 cathode쪽에 가까운 곳에서 exciton이 형성되기 때문이다. CE에도 더 두꺼운 ETL을 가진 소자가 더 높은 CE값 가짐을 확인할 수 있다. 모든 소자가 $200mA/cm^2$에서 가장 높은 CE값을 나타낸 이유는 $200mA/cm^2$에서 electron-hole 결합이 만들어내는 exciton형성이 가장 많기 때문이다. PE, QE도 ETL 두께가 두꺼울수록 특성을 향상이다. 결론적으로 ETL의 두꺼울수록 current density값이 감소함을 보이고 있는 반면 turn on voltage, luminance, efficiency 증가함을 볼 수 있다.

• Current Photovoltaic Research
• /
• 제8권2호
• /
• pp.60-65
• /
• 2020

In perovskite solar cells with planar heterojunction configuration, selection of proper charge-transporting layers is very important to achieve stable and efficient device. Here, we developed solution processible Cu doped NiO_x (Cu:NiO_x) thin film as a hole-transporting layer (HTL) in p-i-n structured methylammonium lead trihalide (MAPbI₃) perovskite solar cell. The transmittance and thickness of NiO_x HTL is optimized by control the spin-coating rate and Cu is additionally doped to improve the surface morphology of undoped NiO_x thin film and hole-extraction properties. Consequently, a perovskite solar cell containing Cu:NiO_x HTL with optimal doping ratio of Cu exhibits a power conversion efficiency of 14.6%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1650-1653
• /
• 2007

We demonstrate fluorescent green organic lightemitting diodes employing a rhenium oxide ($ReO_3$)-doped N,N-diphenyl-N,N'-bis(1,1'-biphenyl)-4,4'-diamine (NPB) hole transporting layer (HTL). The devices exhibit significantly reduced driving voltages as well as prolonged lifetime. Details of $ReO_3$ doping effects are described in terms of charge transfer complex and stabilization of HTL morphology.

• Polymer(Korea)
• /
• 제38권1호
• /
• pp.38-42
• /
• 2014

The poly[(9,9-bis((6'-(N,N,N-trimethylammonium)hexyl)-2,7-fluorene)-alt-(9,9-bis(2-(2-(2-methoxyethoxy)ethoxy)ethyl)-9-fluorene)) dibromide (WPF-6-oxy-F)] and graphene oxide (GO) was blended and irradiated with gamma ray under ambient condition. This WPF-6-oxy-F-GO composite was investigated as a hole-transporting layer (HTL) in organic solar cells (OSCs). Compared with the pristine GO, the sheet resistance ($R_{sheet}$) of irradiated WPF-6-oxy-F-GO was decreased about 2 orders of magnitude. The reason for the decrease of $R_{sheet}$ is the effect of efficient ${\pi}-{\pi}$ packing resulted from the formation of C-N bond between WPF6-oxy-F and GO. As a result, the efficiency of OSCs was dramatically enhanced ~ 6.10% by introducing irradiated WPF-6-oxy-F-GO as a HTL. WPF-6-oxy-F-GO is a sufficient candidate for HTL to facilitate the low-cost and high efficiency OSCs.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.306-307
• /
• 2015

유기태양전지의 대표적 Hole Transporting Layer(HTL)로는 전도성 고분자인 PEDOT:PSS이다. PEDOT:PSS는 약산성의 물질로 전극을 부식시켜 디바이스의 효율을 감소시키기 때문에 PEDOT:PSS를 대체하기 위한 Buffer층에 대한 연구가 활발히 진행되어지고 있다. PEDOT:PSS를 대체할 수 있는 Nickel Oxide(NiO) Buffer 층은 wide band-gab으로 Hole Transporting Layer와 Electron Blocking Layer 역할을 동시에 하여 디바이스의 효율을 향상시킬 수 있으며, 디바이스의 수명을 향상시킬 수 있다는 장점이 있다. NiO는 용액공정과 Sputter 증착 방법으로 형성할 수 있는데, 용액공정은 고온공정이 요구되어지고 Sputter 증착방법은 산화되기 쉬운 전극위에서는 전극의 손상을 발생한다. 본 연구에서는 이러한 단점을 해결하기 위해서 Ni을 Magnetron Sputter로 증착한 후 Ion Beam 처리를 통해 산화시켜 NiO 층을 형성하는 방법을 연구하였다. 본 연구에서 제안한 NiO형성 방법으로 유기태양전지를 제작하여 PEDOT:PSS를 Buffer층으로 사용한 태양전지와 Voc가 0.72 V로 유사하게 나와 NiO가 Buffer층으로 잘 형성된 것을 확인하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제11권10호
• /
• pp.871-877
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays, where they are attractive because of their capability of multicolor emission, and low operation voltage. In this study, glass substrate/ITO/Eu(TTA)$_3$(phen)/Al, glass substrate/ITO/Eu(TTA)$_3$(phen)/Al and glass substrate/ITO/Eu(TTA)$_3$(phen)/AlQ$_3$/Al structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, Eu(TTA)$_3$(phen) as an emitting material, and Tris(8-hydroxyquinoline) aluminu-m(AlQ$_3$) as an electron transporting layer. Electrolumescent(EL) and I-V characteristics of Eu(TTA)$_3$-(-phen) were investigated. These structures show the red EL spectra, which are almost the same at the PL spectrum of Eu(TTA)$_3$(phen). I-V characteristics of this structure show that turn-on voltage was 9V and current density was 0.01A/㎤ at a operation voltage of 9V. Electrical transporting phenomena of these structures were explained using the trapped-charge-limited current model with I-V characteristics.

• Journal of Adhesion and Interface
• /
• 제23권2호
• /
• pp.17-24
• /
• 2022

Colloidal quantum dots (QDs) have gained attention for applications in quantum dot light emitting diodes (QLEDs) due to their high photoluminescence quantum yield, narrow emission spectra, and tunable bandgap. Nevertheless, non-radiative recombination induced by electron and hole imbalance deteriorates the device efficiency and stability. To overcome the problem, researchers have been trying to enhance hole transport properties of hole transporting layers (HTL) and/or slow down the electron injection in electron transport layer (ETL). Here, we summarize two approaches: i) development of interfacial materials between QD and ETL (or HTL); ii) engineering of HTL by blending or multi-layer approaches.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.582-588
• /
• 1999

정보화 사회의 발전과 함께 멀티미디어에 대한 관심이 집중되고 있으며, 점유 공간이 작고 가벼우며 대면적이 가능한 정보 표시 디스플레이에 대한 기술은 고부가가치 산업으로 인식되어 지고 있다. 이러한 정보 표시 디스플레이들 중, 전기 발광 소자 (Electroluminescence Display : ELD), 액정 표시 디스플레이 (Liquid Crystal Display LCD), 플라즈마 디스플레이 (Plasma Display Panel) 등의 대한 연구가 세계적으로 매우 활발하게 진행되고 있다. 본 연구에서는 란탄 계열의 금속 착 화합물인 Tb(ACAC)$_3$(Phen)과 Tb(ACAC)$_3$(Phen-Cl)를 이용해 다비이스를 제작한후 광학적 및 전기적 특성을 조사하였다. 또한 luminous efficiency와 cyclic voltametric 방법을 이용해 에너지 밴드로 두 발광 물질인 Tb(ACAC)$_3$(Phen)과 Tb(ACAC)$_3$(Phen-Cl)을 비교.분석하였다. 본 연구의 디바이스 구조를 보면 anode/hole transporting layer (HTL)/emitting material layer (EML)/electron transporting layer (ETL)/cathode와 같고 ETL를 aluminum-tris- (8-hydroxyquinoline) (Alq$_3$)와 bis(10-hydroxybenzo(h)quinolinato)beryllium (Bebq$_2$)를 사용하였으며 HTL 로 N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD)를 사용하였다.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1281-1282
• /
• 2008

Low cost TCO(Transparent Conductive oxide) thin films were prepared by 3" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify feasibility of the AZO thin films to organic light emitting device (OLED) application, test organic light emitting device was fabricated based on AZO as TCO, TPD as hole transporting layer (HTL), Alq3 as both emitting layer (EML) and electron transporting layer (ETL), and aluminium as cathode, where the both ITO and AZO surfaces were treated using $O_2$ RF plasma. The I-V characteristics of the AZO/TPD/Alq3/Al OLEDs were evaluated. As the results, the performance of the OLEDs with AZO as transparent conducting anode could be useable.

• Journal of the Korean Applied Science and Technology
• /
• 제16권1호
• /
• pp.41-44
• /
• 1999

Recently, high luminance and efficiency were realize in organic thin film electroluminescence (EL) cells with multilayer structures including an emitting layer (EML), hole transporting layer (HTL), and an electron transporting layer (ETL). In this study, Bis(10-hydroxybenzo[h]quinolinato)beryllium (Bebq2) was synthesized. PL and EL characteristics of their thin film were investigated by fabricating the devices having a structure of ITO/PVK/Bebq2/Al, ITO/PVK dispersed with TPD/Bebq2/Al. The EL color of these device was greenish and the wavelength of their EL peaks was located, respectly, at 495nm, and 492.5nm.