• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.164-167
• /
• 1988

This paper reports optical properties and hole formation of a 488nm-optimumed trilayer structure utiluzed Te-based thin films as a recording layer, and the application of trilayer to 830nm. The optical recording characteristics of metallic recording media are enhanced significantly by incoporating the metal (Al) layer into an antireflection trilayer structure. Due to the interference condition inherent in the design of the trilayer structure, reflectance from holes is ranked a low fraction. the hole formation is carried out by laser by $Ar^+$ laser(488nm). For 20nsec laser pulse duration, the hole opening threshold power of $(Te_{86}Se_{14})_{50}Bi_{50}$ trilayer is lower than that of monolayor that used in this experiments. Hole shapes of the whole sample were clean. For the application of the diode laser, the thickness of dielectric is varied by$\lambda$/4n. In order to compare the monolayer with the trilayer reflectance was measured.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.59-64
• /
• 2014

The kidney vortex is the important factor adversely influencing film cooling effectiveness. In general, double jet film-cooling hole is designed to overcome the kidney vortex by generating anti-kidney vortices. In this study, the film cooling characteristics and the effectiveness of the double jet film cooling hole were numerically investigated with various area ratios of the first($A_1$) and second($A_2$) cooling hole($A_1/A_2$=0.8, 1.0, 1.25) and lateral ejection angle(${\alpha}$ = $30^{\circ}$, $45^{\circ}$, $60^{\circ}$) as the design parameters. The effects of lateral distance between the first and second row holes are investigated. Numerical study was performed by using ANSYS CFX with the shear stress transport(SST) turbulence model. The film cooling effectiveness and temperature distribution were graphically depicted with various flow and geometrical conditions.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.112-120
• /
• 2005

The injector, which is used in a 4-valve gasoline engine, is required to be maintained the dual stream because of the design of dual intake port. In addition, the spray characteristics of fuel injector have strong influence on engine performance, exhaust emission, fuel consumption, and especially the cold start condition for the port injection. So, commercial gasoline injectors off different type were inspected. Those are 2 hole,4 hole, air shroud 4 hole, and air shroud 4 hole injector with separator. The spray behavior of dual stream was researched by the visualization system and PDPA system was employed to measure the droplet size. Atomization is one of the most important characteristic, so droplet size distributions and SMD are investigated. And the spray characteristics of each injector are also analyzed such as the spray tip penetration, spray angle, and separation angle.

• 한국지진공학회논문집
• /
• 제16권6호
• /
• pp.21-28
• /
• 2012

Welded Unreinforced Flange-Welded Web (WUF-W) connection is one of Special Moment Frame (SMF) specified in ANSI/AISC-358. From the experimental test of WUF-W connection specimens conducted by the previous study, fracture occurred in the beam flange before achieving total inter-story drift angle of 0.04radian required for Special Moment Frames (SMF) system even though the specimens satisfied the design and detailing requirement specified in ANSI/AISC-358. These results are estimated as problem of the access hole geometry. In this study, a full-scale WUF-W connection specimen was made with a modified access hole geometry, and tested with the same test setting and loading as the previous test. From test results, the deformation capacity of the tested WUF-W connection specimen exceeded 4%, which is required for connections in SMF system. Comparing with the WUF-W specimens of the previous study, the strain demand of the beam flange in the tested specimen was decreased and energy dissipation capacity of the specimen was improved.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.19-32
• /
• 2020

Metallic energy-dissipation dampers are widely used in structures. They are comprised of an added damping and stiffness (ADAS) device with many parallel, diamond-shaped hole plates, the neck width of which is an important parameter. However, no studies have analyzed the neck width's influence on the ADAS device's performance. This study aims to better understand that influence by conducting a pseudo-static test on ADAS, with three different neck widths, and performing finite element analysis (FEA) models. Based on the FEA results and mechanical theory, a design neck width range was proposed. The results showed that when the neck width was within the specified range, the diamond-shaped hole plate achieved an ideal yield state with minimal stress concentration, where the ADAS had an optimal energy dissipation performance and the brittle shear fracture on the neck was avoided. The theoretical values of the ADAS yield loads were in good agreement with the test values. While the theoretical value of the elastic stiffness was lower than the test value, the discrepancy could be reduced with the proposed modified coefficient.

• 한국지진공학회논문집
• /
• 제21권5호
• /
• pp.205-213
• /
• 2017

The WUF-W moment connection is a pre-qualified connection that can be used for special moment frames specified in current seismic design specifications. Since the stress distribution near the connection varies according to access hole configuration, the cyclic performance of WUF-W connections is strongly affected by the access hole configurations. To evaluate the connection performance according to various access hole configurations, it is expensive to conduct experiments with many connection specimens. Instead, finite element analyses (FEA) can be performed. Throughout the FEA, stress and strain distribution in the connection can be monitored at each loading step. The purpose of this study is to construct nonlinear 3-dimensional FE models for accurately predicting the cyclic behavior of WUF-W connections. For predicting connection fracture using FEA, an appropriate response index detecting the incidence of connection rupture is proposed.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.209-216
• /
• 2016

Holes of rivets, bolts and nuts may cause stress concentration on the plates used in aircraft, ship and other structures. Excessive stress concentration may lead to severe breakage of the plates. Thus, accurate analysis of the stress concentration at the design stage will be important. In this paper, accuracy of EDISON program in stress concentration analysis was examined. By changing hole size on a narrow plate, the change of the stress concentration factor(K) was investigated. Additionally, the same experiment was conducted about series of holes on plate to investigate the interaction between adjacent holes. Then, these numerical results were compared with the analytic prediction. EDISON program showed very high accuracy about stress concentration, since the numerical results was correlated well with the analytic prediction.

• Spatial Information Research
• /
• 제8권2호
• /
• pp.301-315
• /
• 2000

지반조사 자료는 구조물을 시공하거나 설계하기 위해 필요한 기본자료이며 지층의 구성, 토질의 종류 등 기반을 구별하는 정보를 포함한다. 매년 대량으로 발생하는 지반조사 자료들은 현장의 특성을 정확하게 반영하기 때문에 지반조사 자료를 이용하여 지반을 분석한다면, 기존의 지질도나 토양도보다 뛰어난 결과를 얻을 수 있다. 따라서 비균질하고 비정형화된 지반의 특성을 고려하여 서로구별하는 특징을 추출하고, 현장의 특성을 정확하게 반영하는 지반분석 시스템이 필요하다. 본 논문은 지반조사 정보 시스템이 관리하고 있는 시추공의 지층구성 정보와 위치 근접성을 바탕으로 시추공을 클러스터링하여 지반의 구성을 분석하는 지반분석시스템의 설계 및 구현에 대해 전반적으로 기술하였다. 개발된 지반분석시스템은 지반조사 데이터베이스의 시추공 정보를 이용하여 지반이 가지고 있는 특성 정보를 추출하고, 이를 이용하여 유사한 특성 및 위치 근접성을 갖는 시추공의 집합으로 클로스터링하여 사용자에게 정확한 지반구성 정보를 제공하는 시스템이다. 또한, 수치지도의 사용으로 지리적 위치와 지역·지형에 대한 지반구조의 특성조사를 가능하게 하며, 지반조사를 필요로 하는 지역에 대한 지반의 유추가 가능하여 경제적 효과를 볼 수 있다. 따라서, 지반조사 데이터로부터 다양한 종류의 정보를 얻을 수 있으며 지질도나 토양도보다 정확한 지반특성을 제공할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.593-594
• /
• 2008

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.414-419
• /
• 2006

The paper presents information concerning metrological and technical characteristics of KTU-Griff-Tester device, the optimization of its parameters and the cases of its application. It was defined that the behaviour of textile material during its extraction through a rounded hole depends upon its structure. Variations of geometrical shape of woven and knitted specimens can be described by mathematical expressions of shortened epicycloids and Cassini ovals. It is shown that waving process of disc shaped specimen can be predicted on the basis of the law of sine curve. The examples of textiles treatment with different types of commercial softeners are presented, herewith showing the suitability (sensitiveness) of the new device to detect the changes of textile hand. Meantime it is shown that the level of materials anisotropy can be decided on the basis of transformations of specimen's geometrical shape.