• 대한전자공학회논문지SD
• /
• 제46권1호
• /
• pp.1-6
• /
• 2009

고전압 소자에서 스냅백 이후의 유지 전압은 구동전압에 비해 매우 작아서 고전압 MOSFET이 ESD(ElecroStatic Discharge) 파워클램프로 바로 사용될 경우 래치업 문제를 일으킬 수 있다. 본 연구에서는 스택 바이폴라 소자를 이용하여 래치업 문제가 일어나지 않는 구조를 제안하였다. 제안된 구조에서는 유지 전압이 구동전압 보다 높으므로 래치업 문제가 발생하지 않으면서, 기존의 다이오드를 사용한 고전압 파워클램프에 비해 면적이 작으며, 내구성 측면에서 800% 성능향상이 있게 되었다. 제안된 구조는 $0.35{\mu}m$ 60V BCD(Bipolar-CMOS-DMOS) 공정을 사용하여 제작되었으며, TLP(Transmission Line Pulse) 장비로 웨이퍼-레벨 측정을 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1283-1286
• /
• 2006

A holding latch with level shifting function is proposed for power and cost effectiveness with low temperature polycrystalline silicon technology on the glass backplane. Layout area and power consumption of the proposed circuit are reduced by 10% and 52% compared with those of the typical structure which combines a static D-latch and a cross coupled level shifter for 2.2" qVGA panel, respectively.

• Journal of Biosystems Engineering
• /
• 제22권1호
• /
• pp.41-48
• /
• 1997

A nondestructive quality inspection technique using acoustic impulse response method was studied to investigate the feasibility of egg shell inspection. An experimental system was built to generate impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seat, a microphone with preamplifier, and a digital oscilloscope connected to Personal Computer by RS-232C interface. The factors such as impulse generating method, egg holding method, and sensor location were evaluated by analyzing the power spectrum density of the measured signal. The results obtained are summarized as follows : 1. From the sampled eggs, the proper conditions for detecting damaged eggs were found as followings; ceramic for the impact ball material, rubber for egg seat material, 20 degrees for an impact angle of pendulum, 10mm for the distance between egg and sensor, the sharp side for impacting part, and 180 degrees for the location of sensor. 2. Examination of the Fourier transformed analysis in beth normal and damaged eggs revealed that those factors such as the resonant frequency, a number of peak frequencies and the magnitude of power spectrum were important to detect damaged eggs.

• 한국통신학회논문지
• /
• 제31권1A호
• /
• pp.11-15
• /
• 2006

CW-HB(continuous wave-holding beam)를 이용하여 전치 증폭되는 SOA-MZI(semiconductor optical amplifier-Mach-Zehnder interferometer) 파장변환기가 제안되고 10Gb/s에서 실험적으로 검증되었다. 바이어스 전류만으로 전치증폭기를 제어하던 기존의 방법과 비교할 때, 제안된 CW-HB 제어 방법은 IPDR(input power dynamic range)의 개선 측면에서는 20dB 정도로 유사하나 출력신호의 왜곡을 제거하여 Q 파라미터를 $2{\sim}3$ 정도 향상시키고 낮은 NF(noise figure)를 달성하여 $2{\sim}5dB$ 정도 더 높은 소광 비를 얻을 수 있어서 매우 우수하다.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1816-1821
• /
• 2019

This research investigates the feasibility of using the thermoelectric power to monitor the thermal embrittlement in 2507 super duplex stainless steel (SDSS) exposed to a temperature between $280^{\circ}C$ and $500^{\circ}C$. It is well known that the precipitation of Cr-rich ${\alpha}^{\prime}$ phase as a result of the spinodal decomposition is the major cause of the embrittlement and the loss of corrosion resistance in this material. The specimens are thermally aged at $475^{\circ}C$ for different holding times. A series of mechanical testing including the tensile test, Vickers microhardness measurement, and Charpy impact test are conducted to determine the property changes with holding time due to the embrittlement. The mechanical strengths and ferrite hardness exhibit very similar trends. Scanning electron microscopy images of impactfractured surfaces reveal a ductile to brittle transition in the fracture mode as direct evidence of the embrittlement. It is shown that the thermoelectric power is highly sensitive to the thermal embrittlement and has an excellent linear correlation with the ferrite hardness. This paper, therefore, demonstrates that the thermoelectric power is an excellent nondestructive evaluation technique for detecting and evaluating the $475^{\circ}C$ embrittlement of field 2507 SDSS structures.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.40-50
• /
• 2021

Science museum are dealing with exhibits on field of changing science and technology, and previous research suggested that exhibits replacement should carried out at least every 5 years. In order to efficiently replace exhibits within a limited budget, various studies analyzed visitors' preferences to exhibits. Recently, studies use various technologies to collect the data on visitors' preferences automatically, but almost of studies had a high dependency on their visitors such as visitors needed to carry specific sub-devices in the museums for gathering data. As complementing the limitations of previous research, this study introduces the improved method which is able to automatically collect and quantify visitors' preferences to exhibits using TensorFlow, a deep learning technology. By the proposed analysis method, it was possible to collect 2,520 data of visitors' experience on exhibits in totality. Based on collected data, attraction power and holding power indicating the preference of visitors on exhibits were able to be calculated. The result also confirmed antecedent research conclusion that the attraction power and holding power of the exhibit which consists of 3 dimensional structures work are higher than other exhibits. As a conclusion, the proposed method will provide more convenient data collection method for detecting visitors' preference.

• 한국농공학회논문집
• /
• 제62권2호
• /
• pp.17-29
• /
• 2020

The objective of this study was to find an optimum methane yield condition in anaerobic digestion of sewage sludge with microwave pretreatment. The pretreatment process was carried out using a lab scale industrial microwave unit (2,450 MHz frequency). The digestion efficiency of pretreated sludge was evaluated by biochemical methane potential (BMP) test. Box-Behnken design and Response Surface Analysis (RSA) were applied to determine the optimal combination of sludge mixing ratio (0 to 100%), power (400 to 1600 W), holding time (0 to 10 min) and pretreatment temperature (60 to 100℃). BMP test results showed that Volatile Solid (VS) removal efficiency was up to 48% at a condition of 0% for mixing ratio, 1600 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. Methane production was up to 832.3 mL/g VS_removed at a condition of 50% for mixing ratio, 1000 W for power, 5 min for holding time, and 80℃ for pretreatment temperature. The results of the variance analysis (ANOVA) showed that the p-value of the power and pretreatment temperature among the independent variables were significant (p<0.05), and in particular, the pretreatment temperature significantly affected on the solubilization and methane production. The optimum condition for the maximum methane yield (847 mL/g VS_removed) was consist of 38.4% of mixing ratio, 909.1 W of power, 4.1 min of holding time, and 80℃ of temperature within the design boundaries.

• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.118-124
• /
• 1998

This paper describes a relationship of a space vector PWM and a sinusoidal PWM and presents that the space vector PWM can produce linearly the output voltage to the unity MI(modulation index). At first, reference angles and holding angles are derived from expanding a Fourier series of the reference voltage waveform and then the angles are used for the inverter switching to linearize transfer characteristics of the inverter. In addition, the harmonic components of the output voltage are analyzed and on-line control is shown to be feasible by approximating in piecewise-linearization the reference and holding angles versus the MI. In V/f control of the induction motor, it is verified by the experiment that the motor current is changed smoothly for the variation of the inverter input voltage and the change of the reference voltage.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.61-65
• /
• 2003

Sheet metal forming process is a non-linearity problem which Is affected by various process variables, such as geometric shape of punch and die, frictional characteristic, etc.. Therefore, the knowledge of the influence of the process variables is needed in the design of sheet metal working processes. In this paper, deep drawing tests for blank holding force, punch speed and lubrication between sheet material and tool were carried out to investigate the influence upon sheet formability. Experimental results were discussed about the defects on the deformation behaviors during the forming process.

• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.22-32
• /
• 2008

본 논문에서는 전철 구동용 견인 전동기의 구동을 위한 과변조 영역에서의 NPC형 3-레벨 인버터의 출력전압 선형화 기법을 제안한다. 과변조 영역은 Modulation Index: MI에 따라서 2가지 모드로 나누었으며 과변조영역 I에서는 퓨리에 시리즈를 통한 기본파성분의 크기로 유도된 reference angle을 사용하였다. 과변조영역 II에서는 과변조영역 I과 같은 방법으로 holding angle을 구하여 사용하였다. 이 두 가지 과변조기법을 통하여 PWM 인버터 출력전압을 1펄스 모드까지 선형적으로 획득할 수 있다.