• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.241-244
• /
• 2001

This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage, This paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit id constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduce and the power factor improve. A circuit design method is shown by experimentation and confirmed simulation. It explained that compared conventional pulse-width modulated (PWM)inverter with half pulse-width modulated (HPWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• Journal of Adhesion and Interface
• /
• v.10 no.4
• /
• pp.174-181
• /
• 2009

The viscosity for hi-solid pressure sensitive adhesive to improve water soluble low viscosity pressure sensitive adhesive polymerized using seeded polymerization. While seed binder polymerizing it produces an optimum polymerization condition, and acrylic acid and seed binder concentration changed were measurement of viscosity variation and adhesive power at the substrate (SUS420J) as flowing results. In adhesive polymerization, seed binder concentration 7 wt%/monomer was recovered 60% of solid content, 2,100 cps of low viscosity and clear adhesive film. When acrylic acid content was 4 wt%/monomer, it was turned excellent adhesive power and holding power.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1786-1795
• /
• 2021

Printed Circuit Heat Exchanger (PCHE) is a widely used heat exchanger in the supercritical carbon dioxide (sCO₂) Brayton cycle because it can work under high temperature and pressure, and has been a hot topic in Next Generation Nuclear Plant (NGNP) projects for use as recuperators and condensers. Most previous studies focused on channel structures or shapes. However, no clear advancement has so far been seen in the allover size of the PCHE. In this paper, we proposed an optimal size of the PCHE with a fixed volume. Two boundary conditions of PCHE were simulated, respectively. When the volume of PCHE was fixed, the heat transfer rate and pressure loss were picked as the optimization objectives. The Pareto front was obtained by the Multi-objective optimization procedure. We got the optimized number of PCHE channels under two different boundary conditions from the Pareto front. The comprehensive performance can be increased by 5.3% while holding in the same volume. The numerical results from this study can be used to improve the design of PCHE with straight channels.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.257-262
• /
• 2012

pasting characteristics. Their water contents, water holding capacities, solubilities, swelling power, amylose contents, damaged starches, particle sizes and pasting characteristics were measured. The water content and water holding capacities of various types of rice flours collected in the market were 7.64-14.97% and 95.22-232.94%, respectively. Their solubilities and swelling power were 1.97-37.40% and 1.33-5.76, respectively. Various types of rice flour had 32.11-305.67 ${\mu}m$ particle sizes. Among the various types of rice flour collected in the market, the lowest starch damaged content was 3.17%. The peak viscosities of the samples were 17.74-295.95 RVA. Among the rice flours that were collected in the market, the lowest pasting temperature was $69.72^{\circ}C$. As a result, it was shown that rice flour types with high starch damage contents tend to have higher expressed water holding capacities. Moreover, the samples with lower particle sizes tended to have final viscosities, and pasting temperatures.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.2-5
• /
• 1996

Orissa is one of the major rice growing states of India. The state covers an area of 15.54 mha with 6.00mha cultivable holding is 1.46 ha. The power input is much below the national average of 0.87 hp/ha. Recently, the Government of Orissa has accorded equal status to Agriculture as given to the Industry with determination to increase the power input for agricultural production to2.54 hp/ha so as to obtain an average rice productivity of 3.0t/ha. Appropriate power units so as to be available with in the purchasing power of the small size farm owners in lieu of a pair of bullocks appear to be the right approach and is found to be in line with the highly successful Japanese and Korean model of small farm mechanization . The state needs 0.25m units of small tillers and tractors per year. The present population of tractors and power tillers in the state is about 11000nos. In India, two manufactures in collaboration with Japanese firms started manufacturing of power tiller sin 197 . The present production of power tillers in the country is about 1000 unit per year which is inadequate to meet the demands of all the stats. To meet the demands of the Orissa state, three Chinese model power tillers imported by local agencies are being supplied to the farmers during the past two years. Encouraged by the demand of power tillers in the state, three local manufacturing units located at Bhubanewar have come up with their own model of light weight power tillers(1.5 to 3.0 hp) during the past one year. These machine have been evaluated in the farms of the university and have been found to be promising . There is a target of supplying during 1996-97. The local manufacturers are in need of international collaboration for technical knowhow to manufacture these machine economically to meet the requirement of the farmers.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.223-228
• /
• 2006

This study was carried out to investigate the effects of ohmic power intensity on the physico-chemical properties of hamburger patties. Six different ohmic power intensities (0, 10, 20, 30, 40, and 50V) were delivered by controlling the power with the sine wave at 50Hz. The ohmic power intensity influenced the thawing rate, and increasing ohmic power intensity increased the thawing rate. The faster thawing rate was obtained at higher ohmic power intensity (50V) with 0.5% NaCl added meat patties in comparison to no NaCl added hamburger patties. The pH values of all patties were not significantly different with increasing ohmic power intensity (p<0.05). Increasing thawing rate did not tend to improve the water holding capacity (WHC) of all patties by ohmic thawing. Cooking losses were almost the same regardless of increasing ohmic power intensity. Increasing ohmic power intensity tended to increase the thiobarbituric acid reactive substance (TBARS) levels. TBARS levels of all hamburger patties without NaCl were significantly higher than that of 0.5% NaCl added hamburger patties (p<0.05) at higher ohmic intensity (50V). In conclusion, these results indicated that a higher ohmic power intensity at 50 V induced the lipid oxidation of all patties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.555-562
• /
• 2008

In this paper we proposed a practical low-power design technique using clock-gating in RTL. An efficient low-power methodology is that a high-level designer analyzes a generic system and designs a controller for clock-gating. Also the desirable flow is to derive clock-gating in normal synthesis process by synthesis tool than to insert directly gate to clock line. If low-power is considered in coding process, clock is gated in coding process. If not considered, after analyzing entire operation. clock is Bated in periods of holding data. After analyzing operation for clock-gating, a controller was designed for it, and then a low-power circuit was generated by synthesis tool. From result, we identified that the consumed power of register decreased from 922mW to 543mW, that is the decrease rate is 42%. In case of synthesizing the test circuit using synthesizer of Power Theater, it decreased from 322mW to 208mW (36.5% decrease).

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.395-402
• /
• 2018

This study aims to analyze the film "Never Let Me" by human value which is to be realized in the social structure suppressed by the power of life and the power of discipline in Foucault 's power theory. After 18century having changed monarch power holding the power of life-and-death that enforced corporal punishment, bio-power that corrected body and granted ability suitable discipline to people makes people worked like machine. In control of the bio-power, human achieved safe desire that cure disease and prolong life-span and worked as producer goods. School controls body and make people internalized rule using discipline for working bio-power efficiently. There is differentiation between this movie and the other about human clone. The clones adapt role as organ donator without resistance and there is no conflict between original and copy. Instead of preexistence novel and movie that is set in future, it is a form of past retrospect from the 1970s to 1990s. having emotions, They find independence ego and realize value of life in finite living by depending relation or undergoing loss.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.122-127
• /
• 1999

Quality changes of Korean ginseng on microwave drying were determined in terms of water activity, crude protein, crude lipid, crude ash, dielectric properties, content of sugar, ginsenoside composion, microstructure. Korean fresh ginseng were subjected to four different processing : 3 min microwave drying and 2 min holding-24 hrs drying (MWI), 5 min microwave drying and 2.5 min holding-24 hrs drying (MW2), 3 min microwave drying and 2 min holding-12 hrs after hot air drying for 12 hrs drying at $45^{\circ}C$ (MWH1), 5 min microwave drying and 2.5 min holding-12 hrs drying after hot air drying for 12 hrs at $45^{\circ}C$ (MWH2), Water content was decreased 14.33% without shrinkage and water activity was 0.57 after microwave drying. Permittivity was increased as water content increased. As temperature increased, permittivity was increased until $40^{\circ}C$ and fast decreased over $40^{\circ}C$. Content of ginsenoside for MW1 and MW2 was higher than that of MWH1 and MWH2. Data of free sugar showed that there was no significant difference in each treatment. The MW2 dried ginseng showed a more compact structure than the MWH2 ginseng.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.1-6
• /
• 2008

The holding voltage of the high-voltage MOSFETs in snapback condition is much smaller than the power supply voltage. Such characteristics may cause the latcup-like problems in the Smart Power ICs if these devices are directly used in the ESD (Electrostatic Discharge) power clamp. In this work, a latchup-free design based on the Drain-Extended PMOS (DEPMOS) adopting gate VDD structure is proposed. The operation region of the proposed gate-VDD DEPMOS ESD power clamp is below the onset of the snapback to avoid the danger of latch-up. From the measurement on the devices fabricated using a $0.35\;{\mu}m$ BCD (Bipolar-CMOS-DMOS) Process (60V), it was observed that the proposed ESD power clamp can provide 500% higher ESD robustness per silicon area as compared to the conventional clamps with gate-driven LDMOS (lateral double-diffused MOS).