• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.499-508
• /
• 2016

Injection molding is a method for manufacturing many products, wherein a plasticized resin is injected into a mold at high pressure and hardened. According to the method, the product can be manufactured into various forms, and the mass production of up to tens of thousands of products is possible. The purpose of this study was to determine the process conditions for manufacturing a door latch for automobiles, through an analysis of the injection molding method. To calculate an appropriate injection flow for injection molding, a primary analysis for comparing the injection time, pressure, flow pattern, consolidation range, shear stress, shear rate, and weld line, as well as a secondary analysis for determining the conditions for stabilizing the molding temperature, holding pressure, and cooling process, were conducted. The characteristics of injection molding, and their influence on the product quality are discussed. No weld line and pores were observed on the products that had been manufactured based on the process conditions determined above. In addition, there were no flaws regarding the deformation compared to the prototype. Therefore, the manufacture of a product under the conditions determined in this study can reduce the defect rate compared to the existing production, and the process is also more competitive due to reduced production time.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.587-593
• /
• 2018

This study was carried out to investigate the effect of roasted rice bran (RRB) on the rheological properties of bread dough. According to farinograph analysis, the consistency of the control sample was greatest. There were no significant differences in water absorption (p<0.05). Lower values of development time, stability, and time to breakdown, which were affected, by the addition of RRB, were observed for RRB-containing dough samples, compared to the control dough sample. Addition of RRB significantly increased the mixing tolerance index (MTI). According to rheofermentometer analysis, the values of H'm, $T^{\prime}_1$, and retention volume decreased with increase in the amount of RRB added. According to the rapid visco analyzer (RVA) analysis, peak viscosity, holding strength, and setback values were greater in the control than in the RRB-containing samples. The addition of RRB to the flour influenced rheological properties like fermentation volume and acidity. The total acidity increased with the increase in the amount of RRB added. The present study has indicated that there was no significant difference between the rheological properties of the control and 5% RRB-containing dough samples. Therefore, the addition of 5% RRB could be an effective way to produce functional flour bread without affecting its desirable physical properties.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.4
• /
• pp.514-520
• /
• 2008

This study addresses the development of a soy hamburger patty containing enzyme-treated textured soy protein (TSP) as a meat analogue. In order to reduce the beany flavor and enhance the texture, TSP was treated with 0.3% Flavourzyme for 5, 10, 20, or 30 min. The degree of hydrolysis and the water holding capacity of the TSP increased with increasing hydrolysis time. The oil binding capacity of the TSP also increased with increasing hydrolysis time, approaching the maximal value, 175.82%, at 30 min, whereas that of pork scored with the lowest value of 128.67%. The volume of pork was reduced to 81.5% as the result of heat treatment, whereas that of the TSP increased to 140.57%. The values of 'L', 'b', and '${\Delta}E$' differed significantly (p<0.001) with heat treatment, but the 'a' values did not differ significantly. With regard to texture, the hardness values were highest in the pork hamburger patty (PHP), and were lowest in the soy hamburger patty (SHP) containing untreated TSP. The hardness of the SHP containing TSP treated for 20 min did not differ significantly from that of the PHP. The cohesiveness and gumminess of the SHP treated for 20 min were highest, whereas those treated for 10 min were the lowest. The gumminess of the SHP treated for 20 min did not differ significantly from that of pork. The chewiness of the PHP was the highest, whereas that of the SHP treated for 5 min was the lowest. In our sensory evaluation, PHP evidenced the highest scores, followed by the SHP treated for 30 min, as color, texture, beany flavor, and overall quality all improved as the consequence of increasing enzyme treatment duration. In conclusion, it is believed that SHP has great potential as a substitute for meat, in that the flavor, texture, and beany flavor of SHP did not differ significantly from those of PHP.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2011

This study was conducted to investigate the effect of vase material and floral preservative treatment over time on flower color, leaf color and flower size of cut flowers Rosa hybrida 'Aqua' and 'Corvernet', and Gerbera jamesonii 'Honeymoon' and 'Golden Time' stuck in a glass, porcelain, or onggi (pottery with a dark bronze glaze) vase containing either tap water or a floral preservative solution. The ${\Delta}E$ values in flower color of 'Aqua' rose at 8 days after treatment with a floral preservative in onggi and porcelain vases were low. The ${\Delta}E$ value of 'Covernet' rose treated with floral preservative in an onggi vase was the lowest and L value was the closest to that of petals of cut flowers at just before treatment (control). The ${\Delta}E$ value of 'Honeymoon' gerbera treated with a floral preservative in an onggi vase was the lowest and a value of 58.81 and b value of 34.29 were the closest to that of the control group as color of cut flowers in an onggi vase was similar to the color at the beginning of treatment. The ${\Delta}E$ value of 'Golden Time' gerbera treated in an onggi vase was significantly lower than that in a porcelain or glass vase and a value of -7.81 treated with a floral preservative solution in an onggi vase was the closest to the control and b value was high in an onggi vase as well. The L, a, and b values in leaf color of roses were similar to each value of the control and ${\Delta}E$ value of 3.25 measured in an onggi vase was lower than that in a porcelain or glass vase. Flower diameter of 'Covernet' and 'Golden Time' roses treated with a floral preservative in an onggi vase was greater than that in other treatments. From these results, the floral preservative applied to a holding solution is assumed to improve the quality and freshness of cut roses and gerberas by inhibiting microbes propagation and by promoting uptake of water and nutrients. The onggi vase with fine pores will promote the expression and maintenance of flower and leaf colors and may increase flower diameter by high air permeability.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1017-1024
• /
• 2005

This study was investigated the effect of the length of stunning time on pH, water holding capacity(WHC), cooking loss(CL), meat color and incidence rate of blood spot in broiler carcass. One-hundred and forty broiler chickens were slaughtered by three different length of stunning times(5 sec., 8 sec., 11 sec.) with the same electrical frequency(255Hz) and 50 voltage in a commercial abattoir. The WBS values and cooking loss of breast muscle were increased with increasing the stunning time, while WHC of breast muscle were decreased. Lightness(L* value) and yellowness(b* value) scores of leg muscle and skin stunned with 50V, 255Hz, 8 sec, 11 sec. were higher than those of broilers stunned with 50V, 255Hz, 5sec(P<0.05). But, there was no significant difference in color on breast and wing muscle. In subjective evaluation, frequence of the first grade had a trend of being increased by extending the stunning time. There was only a few cases of PSE chicken with 0.02%, while blood spot was observed at the highest rate for the 5 sec. treatment. TBARS indicated that a longer length of stunning resulted in a higher rate of fat oxidation. This experiment demonstrated that the length of stunning time has a significant effect on meat quality and its stability during chiller storage.

• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.763-771
• /
• 2013

This study was carried out to investigate the effects of various temperatures of electro-magnetic resonance and air blast freezing methods on the physicochemical quality of meat. Beef (loin and round), pork (belly and ham) and chicken (breast and leg) were purchased at a commercial market, and the meat was frozen using three methods: air blast freezing ($-20^{\circ}C$ and $-45^{\circ}C$) and electro-magnetic resonance quick freezing. Changes in the physicochemical properties of meat were analyzed by drip loss, cooking loss, water holding capacity (WHC) and proximate compositions. In comparison, regardless of the animal species and cuts of meat, electro-magnetic resonance quick freezing (2 h) resulted in a completely frozen product in a much shorter time than $-20^{\circ}C$ and $-45^{\circ}C$ air blast freezing (24 h and 8 h, respectively). Drip loss of loin which had underwent electro-magnetic resonance quick freezing were significantly (p<0.05) lower than those of the other two treatments, but cooking loss and water holding capacity were the highest at 43.7% and 60.7%, respectively (p<0.05). Characteristics such as crude protein, crude fat and moisture compositions showed significant differences, depending on the cuts and freezing methods (p<0.05). The fat composition of electro-magnetic resonance quick frozen loin and round were significantly low (p<0.05). However, moisture content was the highest compared to other freezing methods, as 67.1% and 71.9%, respectively (p<0.05). Electro-magnetic resonance quick freezing was an appropriate way to reduce the deterioration of meat quality due to freezing, and the drip loss was least for the part with low moisture, low protein, and high fat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.718-724
• /
• 1999

This study was investigated the changes of the properties of matter such as the gel formation of the combined fish based on the mixed rate between the ocean jumbo squid and Alaska pollock surimi, and compared the relationships between the gel formation and water holding capacity. The changes of the gel formation based on 20 min fish grinding time and $2.5\%$ salt concentration according to the mixed rate was thought as the optimal addition limit. There was no significant function of gel product more than $20\%$ Jumbo squid meat. The more squid meat in the mixed meat could make the lower breaking stress but 7:3 rate of pollock : squid could retain breaking strain. The effect of the moisture content on mixed fish meat was studied and the drastic decrease of the gel formation and water holding capacity was indicated in $78\%$.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.500-506
• /
• 1994

For comparison of beef quality, four kinds of beef (Korean native cattle beef, dairy cattle beef, imported beef, cross-bred beef) were investigated through tenderness, juiciness and flavor related components measurement and organoleptic tests. Flavor related chemical components such as NPN, IMP, free fatty acid and free amino acids were analyzed, water holding capacity, contents of hydroxyproline and intramuscular fat were measured for evaluation of beef tenderness. Instron was also used for measuring beef tenderness as an objective method. Triangle test and descriptive analysis test were conducted for comparison and evaluation of preference of various beef samples. In hardness analysis using Instron, imported and cross-bred beefs had higher value than that of Korean native cattle or dairy cattle beef. Water holding capacity and pH of Korean cattle beef was higher than that of others. The intramuscular fat content of Korean cattle beef was highest, so it was expected juicier than other beef. In flavor related compound analysis, NPN content of Korean native cattle beef was the lowest, which shows it spent the least time among sample meats after slaughter. IMP, hypoxantine and inosine were most abundant in Korean native cattle beef. In free amino acids analysis showed that the proportion of basic acid and aromatic acid content of Korean native cattle beef was highest, whereas that of sulfur containing amino acid of imported beef was highest. TBA value of Korean native cattle beef was the lowest, and analysis of fatty acid composition revealed that the proportion of unsaturated fatty acid of Korean native cattle beef was higher than imported and dairy cattle beef, but similar to cross-bred beef. Organoleptic test was performed by triangle test and descriptive analysis. In triangle test, most panelist could distinguish Korea native cattle beef from imported beef and cross-bred beef, imported beef from cross-bred beef. In descriptive analysis which relys on subjective standards of panelists, there was no difference among beef in aroma, flavor and tenderness except juiciness. Even though contents of non volatile flavor compounds in Korean native cattle beef were higher than those of other beef samples, there were no significant differences in subjective panel test. The results showed that Korean consumers do not have common standards for beef quality evaluation.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1732-1739
• /
• 2011

This study was carried out to investigate the effect of lotus root and leaf powder on the quality characteristics of pork patty stored at $3^{\circ}C$ for 9 days. The pork patties were of four types: nothing added(control, T0), 0.5% lotus root powder added (T1), 0.25% lotus root and 0.25% lotus leaf powder added (T2), and 0.5% lotus leaf powder added (T3). The $a^*$ value tended to decrease with longer storage period (p<0.05). The $L^*$ and $a^*$ value of T3 had the lowest value among the samples, the $b^*$ value T2 and T3 were higher than those of T0 and T1 (p<0.05). Water holding capacity decreased with longer storage period (p<0.05), the water holding capacity, cooking loss, increase rate of thickness and decrease rate of diameter were not significantly different among the samples. Hardness and chewiness increased and springiness decreased with longer storage period (p<0.05). The pH creased with longer storage period (p<0.05), but the VBN content not changed during storage. The TBARS values increased with longer storage period (p<0.05), and those of T0, T1, T2 and T3 were 4.57, 1.85, 0.43 and 0.41 mg MA/kg, respectively, after 9 days of the storage. The result suggest that the addition of lotus root and leaf powder at the same time, or addition of lotus leaf powder can be applied to pork patty to its functionality.

• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.165-204
• /
• 2022

This study organized data from 2000 to 2014 for 20 grid-connected countries in Europe and analyzed the determinants of carbon emissions through the panel GLS method considering the problem of heteroscedasticity and autocorrelation. At the same time, the effect of introducing ETS was considered by dividing the sample period as of 2005 when the European emission trading system was introduced. Carbon emissions from individual countries were used as dependent variables, and proportion of generation by each source, power self-sufficiency ratio of neighboring countries, power production from resource-holding countries, concentration of power sources, total energy consumption per capita in the industrial sector, tax of electricity, net electricity export per capita, and size of national territory per capita. According to the estimation results, the proportion of nuclear power and renewable energy generation, concentration of power sources, and size of the national territory area per capita had a negative (-) effect on carbon emissions both before and after 2005. On the other hand, the proportion of coal power generation, the power supply and demand rate of neighboring countries, the power production of resource-holding countries, and the total energy consumption per capita in the industrial sector were found to have a positive (+) effect on carbon emissions. In addition, the proportion of gas generation had a negative (-) effect on carbon emissions, and tax of electricity were found to have a positive (+) effect. However, all of these were only significant before 2005. It was found that net electricity export per capita had a negative (-) effect on carbon emissions only after 2005. The results of this study suggest macroscopic strategies to reduce carbon emissions to green growth, suggesting mid- to long-term power mix optimization measures considering the electricity trade market and their role.