• Applied Microscopy
• /
• v.31 no.4
• /
• pp.315-323
• /
• 2001

In situ TEM heating experiments utilizing kaolinite powder samples result in the following facts. (1) The water recirculation system adopted in the Gatan's heating holder is required to prevent specimen drift above $500^{\circ}C$. (2) Since the degree of phase changes depends on the thickness of powders below $600^{\circ}C$, examinations of both thin and thick specimens are required. (3) Sample preparation using Mo-grids is required for TEM heating experiments above $900^{\circ}C$. At these temperature ranges the effect of heating rate and holding time on the phase transition process increases drastically, so that a programmed temperature control is required. (4) TEM heating experiments of the embedded powders by epoxy for the cross-sectional view was limited due to the severe epoxy movement during heating above $300^{\circ}C$. Better methods of sample preparation are required to overcome this problem.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.388-399
• /
• 2009

This study is to analyze the views on leisure of security agents. As the subject of this study, the security agents holding office in the capital area in 2008 were selected and total 333 samples are drawn among them by using judgement sampling method. The validity of the questionnaire was verified through an expert group meeting. The statistical method is $x^2$ verification(Chi-Square Tests) using SPSSWIN 16.0. Following results are from the methods mentioned above. First, most of the security agents consider leisure as “rest" and they need it for “stress release". About the importance of work and leisure, the security agents mostly think “both work and leisure are important" and they regard leisure as a “very important" matter for an individual. Second, main leisure activities of the security agents are principally “social activities", while the frequency is “2 or 3 times a month", the time is “1-2 hours", and the period is “4-7 years" in general.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.441-447
• /
• 2017

In order to provide personalized services on the Web and for mobile services, it is necessary to collect and analyze information processed by users. Typically, information collected by users is managed online. Using information collected online may be sufficient to provide personalized service. However, in terms of O2O services, which are currently mixed with online and offline services, user information from the offline service can also be an important part of personalized service. Therefore, this study suggests an architecture to collect offline user information to provide more precise personalization services. The collection architecture includes Node Analyzer, Distance Checker, Holding Time Checker, and Cross Analyzer as core elements. This study also offers proposals for processing algorithms of key components that make up the proposed architecture. A case study collects user information of interest based on BLE in order to verify the proposed architecture and algorithms.

• The Korean Journal of Physiology
• /
• v.10 no.2
• /
• pp.11-16
• /
• 1976

In hold that the pulmonary functions which is important situation that the national physical power, at firstly, from age 10 to age 29 young men and women 1,540 person for the progress of grew up, and them to by each aged viewing transition for pulmonary functions physical examination record is as following; and to measure normal Person with comparison by each others pulmonary functions was gained as the results of follows. 1) Frequency of Breathing: It was same the male and female age at 10 per minute over or less of 20 times, but, at age 16 to 17 was $15{\sim}16$ times, and had to precensed compare constant value. 2) Vital Capacity: At the grew up Pregress term as the body stature, age 10 to 17 or 18, had to showing rapidly increasing, but the after Probably constant. The comparison value in man and women in progress of growth up was about $200{\sim}300ml$, and after growth of progress are about 1,500ml, add in men was presence more highly value. 3) Tidal Volume: At a9e 10 was 365m1, but, it was continuing increasing, an4 at age 20 is about 500m1, and the different in men and women about $20{\sim}30$ times and had precense highly value at men. 4) Breathing holding time: It was presence same at male and femele 10 to 13, from 35 second to $37{\sim}38$ seconds, and had to Presence a slight increasing, but, may has to final of the growth progrees age at 14, it should be presence rapidly increasing and the after probably presence as same value but, than female at male is high record average value of $7{\sim}8$ seconds.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.529-536
• /
• 2003

The objective of this study is to investigate the reorientation of hydrides with applied stress intensity factor, the peak temperature and the time when to apply the stress intensity factor in a Zr-2.5Nb pressure tube during its thermal cycle treatment. Cantilever beam (CB) specimens with a notch of 0.5 mm in depth made from the Zr-2.5Nb tube were subjected to electrolytic hydrogen charging to contain 60 ppm H and then to a thermal cycle involving heating to the peak temperature of either 310 or $380^{\circ}C$, holding there for 50 h and then cooling to the test temperature of $250^{\circ}C$. The stress intensity factor of either 6.13 or $18.4\;MPa\sqrt{m}$ was applied at the beginning of the thermal cycle, at the end of the hold at the peak temperatures and after cooling to the test temperature, respectively. The reorientation of hydrides in the Zr-2.5Nb tube was enhanced with the increased peak temperature and applied stress intensity factor. Furthermore, when the CB specimens were subjected to $18.4\;MPa\sqrt{m}$ from the beginning of the thermal cycle, the reoriented hydrides occurred almost all over the Zr-2.5Nb tube, surprisingly suppressing the growth of a DHC crack. In contrast, when the CB specimens were subjected to the stress intensity factor at the test temperature, little reorientation of hydrides was observed except the notch region, leading the Zr-2.5Nb to grow a large DHC crack. Based on the correlation between the reorientation of hydrides and the DHC crack growth, a governing factor for DHC is discussed along with the feasibility of the Kim's DHC model.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.37-42
• /
• 2000

In this paper, The high-speed, low-Power analog-to-digital conversion structure is proposed using the pipelined comparator away for high-speed conversion rate and the successive- approximation structure for low-power consumption. This structure is the successive-approximation structure using pipelined comparator array to change the reference voltage during the holding time. An 8-bit 10MS/s analog-to-digital converter is designed using 0.8${\mu}{\textrm}{m}$ CMOS technology. The INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41㏈ at a sampling rate of 10MHz with 100KHz sine input signal. The Power consumption is 4.14㎽ at 10MS/s.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.4
• /
• pp.365-378
• /
• 1995

Allogeneic bone grafting has recently been used in oral and maxillofacial regions to restore the cosmetic and functional problem. There are several types of allogeneic bone grafts ; bone powder, bone chips, bone blocks. Empirically, it is thought to be better to combine the allogeneic bone chips to any type of tissue adhesive not to displace during packing and condensing. But, there are no reports about using tissue adhesive in allogeneic bone grafting. This experimental study is designed to investigate the effect of the fibrin adhesive on bone healing process after demineralized allogeneic bone grafting in 60 rats. In control groups (30 rats), routine demineralized allogeneic bone grafting were done in 7 ${\times}$ 7mm calvarial bone defects which were drilled intentioally. And we used the fibrin adhesive for holding the bone particle in experimental groups (30 rats). Each experimental specimen was sacrified at 1, 2, 4, 6, 8 weeks postoperatively The results were as follows : 1. The degree of inflammatory cell infiltrations were more prominent in experimental than in control groups till 2 weeks. 2. Early fibroblast proliferation and new capillary proliferation were uncorporated around graft sites in the experimental groups later than in control groups at early stages. 3. Osteoblastic activity in control group was more prominent at 2 weeks. 4. Osteoblastic activity in experimental groups was more prominent than in control group till 4 weeks. 5. New bone formation was more in control group than experimental group till 3 weeks, but similar appearance after that time. As above results, initial bone healing within 2 weeks were more processed in without adhesive group than with adhesive group. But above 4 weeks; similar bone healing were observed.

• Strategy21
• /
• s.38
• /
• pp.47-82
• /
• 2015

To control the sphere, it required a strategic understanding to sphere and a power for overcome to it. In the early 20th century, the Pacific-War is a confrontation between the U.S. and the Japan for holding supremacy a pacific ocean sphere, building on maritime geopolitical perception. The Pacific ocean is a large of sphere, so if a country pursues a Pacific region supremacy, it needs a strategic perception and capability to control the sphere. After the U.S. has unified the continental, it has formed geopolitical perception in the Pacific ocean and by the way to control the Pacific ocean selected a naval power. The U.S. must have overcome a Pacific sphere for getting through to the Pacific region, this concept has developed the War Plan Orange(war plan relations with the Japan). Meanwhile, at this point of time, the Japan has recognized to a geopolitical point of view about security environment in the Pacific ocean. like as the U.S. has the War Plan Orange in mind for building on geopolitical perception of the Pacific ocean, the Japan also has learned geopolitical perception from the U.S. Because of this, the Japan has established the Interception-Attrition strategy(war plan relations with the U.S.). If we don't have overcome a sphere of the Pacific ocean, we don't hold hegemony of the Asia-Pacific region. So the analysis of perspective maritime geopolitics about the Pacific war is a meaningful study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1259-1264
• /
• 1999

In this paper, the High-speed, Low-power Analog-Digital Conversion Archecture is porposed using the Pipelined archecture for High-speed conversion rate and the Successive-Approximation archecture for Low-power consumption. This archecture is the Successive-Approximation archecture using Pipelined Comparator array to change reference voltage during Holding Time. The Analog-to-Digital Converter for video processing is designed using 0.8${\mu}{\textrm}{m}$ CMOS tchnology. When an 6-bit 10MS/s Analog-to-Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 37dB at a sampling rate of 10MHz with 100KHz sine input signal. The power consumption is 1.46mW at 10MS/s. When an 8-bit 10MS/s Analog-to Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41dB at a sampling rate of 100MHz with 100KHz sine input signal. The power consumption is 4.14m W at 10MS/s.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.60-64
• /
• 2002

This paper describes the machining characteristics of the MoSi$_2$--based composites through the process of electric discharge drilling with various tubular electrodes. In addition to hardness characteristics, microstructures of Nb/MoSi$_2$laminate composites were evaluated from the variation of fabricating conditions, such as preparation temperature, applied pressure, and pressure holding time. MoSi$_2$-based composites have been developed in new materials for jet engines of supersonic-speed airplanes and gas turbines for high-temperature generators. These high performance engines may require new hard materials with high strength and high temperature-resistance. Also, with the exception of grinding, traditional machining methods are not applicable to these new materials. Electric discharge machining (EDM) is a thermal process that utilizes a spark discharge to melt a conductive material. The tool electrode is almost -unloaded, because there is n direct contact between the tool electrode and the work piece. By combining a non-conducting ceramic with more conducting ceramic, it was possible to raise the electrical conductivity. From experimental results, it was found that the lamination from Nb sheet and MoSi$_2$ powder was an excellent strategy to improve hardness characteristics of monolithic MoSi$_2$. However, interfacial reaction products, like (Nb, Mo)SiO$_2$and Nb$_2$Si$_3$formed at the interface of Nb/MoSi$_2$, and increased with fabricating temperature. MoSi$_2$composites, with which a hole drilling was not possible through the conventional machining process, enhanced the capacity of ED-drilling by adding MbSi$_2$, relative to that of SiC or ZrO$_2$reinforcements.