• Journal of Food Hygiene and Safety
• /
• v.15 no.1
• /
• pp.13-17
• /
• 2000

The low salt seasoned jeotkal, salted and fermented fisheries product, may has some problems, such as short shelf-life, its putrefaction by mixing some microorganism from additives. It was considered that most microorganism in seasoned jeotkal were introduced from red pepper powder. Therefore, it is important to pasteurize red pepper powder for improving its microbial quality. When red pepper powder was pasteurized by ohmic heating, the survival cell concentration in red pepper powder was reduced to 1-log-unit at 500 V/m, 700 V/m, above 8$0^{\circ}C$. But viable cell counts were reduced from 8.5$\times$10$^{6}$ CFU/g to 2.1 $\times$ 10$^2$CFU/g, i.e. 4.6-log-unit, during ohmic heating at 9$0^{\circ}C$ for 40 min. Color values of red pepper powder during ohmic heating with different holding time were not changed significantly. When squid-jeotkal was manufactured by using the pasteurized red pepper powder, viable cell counts of the product were decreased by about three log cycles, compare with control product. And also the counts of fungi were significantly decreased.

• Journal of The Korean Association For Science Education
• /
• v.30 no.6
• /
• pp.799-814
• /
• 2010

This study aimed at developing a set of question cards for fostering deep understanding and encouraging reasoning about fossils and analyze the characteristics of visitors' communication depending on whether to use the question cards in a fossil gallery. Through several steps, a card set consisted of nine generic questions about fossil exhibitions and guidance for using question cards were developed. Data related to visitors' communications were collected from 18 peer groups (from 5th to 9th grade) visiting the fossil gallery of Gwacheon National Science Museum. Visiting groups' interactions were videotape recorded and transcribed. 'Holding time,' the types of 'actions,' and the types of 'conversation' were analysed. Visitors' actions were divided into three categories: ‘look’, 'speech', and 'motion.' Furthermore, visitors' conversations categorized as 'speech' were subdivided into four patterns: 'enumerative,' 'consensual,' 'responsive,' and 'argumentative.' Using the question cards contributes to increase holding time and most of the visiting actions. Most of the conversation patterns also increased except the responsive pattern. In conclusion, using question cards in a fossil gallery could facilitate concentrated and meaningful visits by enhancing active verbal and non-verbal communications between exhibit and visitor or among visitors, encouraging visitors' reasoning about exhibits, and guiding visitors what and how to focus on exhibits.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.344-350
• /
• 2019

Durability is very important for the commercialization of membranes and electrode assemblies (MEA) developed for proton exchange membrane fuel cells (PEMFC). Durability evaluation of stationary PEMFC MEA has a problem that the voltage change rate should be measured for a long time over 1000 hours under constant current conditions. In this study, the electrochemical durability evaluation protocol of membranes (OCV holding method) using to vehicle MEAs was applied to the stationary MEA for the purpose of shortening the durability evaluation time. After operation of the stationary and automobile MEA for 168 hours under conditions of OCV, cathode oxygen, $90^{\circ}C$ and relative humidity of 30%, I-V, LSV, CV, impedance and FER were measured and compared. When the hydrogen permeability, OCV change, ionic conductivity, and fluorine flow rate, which represent the durability of the membrane after degradation, were all examined, it was shown that durability of stationary MEA membrane was better than that of vehicles MEA membrane. In addition, the electrode degradation of stationary MEA was smaller than that of vehicles MEA after degradation operation. It was possible to evaluate in a short time using automotive protocol that the durability of stationary MEA was superior that of vehicle MEA in terms of membrane and the electrode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.1
• /
• pp.59-66
• /
• 1979

The objective of this paper is to develop a stochastic inventory system model under the so-called continuous-review policy with a Poisson one-at-a-time demand process, iid customer inter-arrival times {Xi}, backorders allowed, and constant procurement lead time $\gamma$. The distributions of the so-called inventory position process {$IP_{(t-r)}$} and lead time demand process {$D_{(t-r,t)}$} are formulated in terms of cumulative demand by time t, {$N_t$}. Then, for the long-run expected average annual inventory cost expression, the "ensemble" average is estimated, where the cost variations for stock ordering, holding and backorders are considered stationary.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.8-12
• /
• 2000

The fatigue crack propagation tests were performed in triangular and holding-time stress waveforms at $650^{\circ}C$. The behavior of fatigue crack propagation was investigated according to waveform. The analysis of high temperature fatigue crack propagation by the stress intensity factor range ${\Delta}K$, elastic fracture mechanics parameter, was not available. The behaviors of high temperature fatigue crack propagation by the J-integral(${\Delta}J_f$, J' and ${\Delta}J_c$), elasto-plastic fracture mechanics parameter, were investigated in a number of stress waveforms. The fast-fast waveform exhibited cycle-dependent(fatigue type), the slow-fast and the hold time with 500sec waveforms appear to be time-dependent(creep type) and the fast-slow and the hold time with 5, 25sec waveforms exhibited conbined behavior of both types(fatigue-creep conbined type).

• Culinary science and hospitality research
• /
• v.11 no.3 s.26
• /
• pp.70-88
• /
• 2005

This research is to 1) examine the perception of an exhibition organizer in holding an exhibition and its time, and 2) find out participants' satisfaction in the exhibition services according to time and purposes of visiting. The questionnaire was distributed to employees who work for exhibition companies, and exhibition visitors that have participated in any kind of international exhibitions which were held in COEX from 27, March to 2, May, 2003. The results of this study are as follows; First convenience facilities nearby, promotion, parking facilities strongly affected participants' overall satisfaction. Secondly, the purposes and time of visiting showed significant factors on the participants' satisfaction in the exhibition services. In turn, buying merchandise and obtaining useful information significantly affected convenience facilities nearby. Also, simple visiting purposes affected the cost of staying and service related to tourism. Finally, the number of workers, time and occupation of exhibitions are showed as important factors for the perception of an exhibition provider in the exhibition services.

• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2011

The behavior of the non-equilibrium grain boundary segregation of boron in low carbon steel was studied through a particle tracking autoradiography. The behavior of the non-equilibrium grain boundary segregation of boron during continuous cooling was compared with the isothermal kinetics of the non-equilibrium grain boundary segregation of boron at the holding temperature using an effective time method. On the basis of the experiments, the cooling rate dependence of the non-equilibrium segregation of boron was explained using the time dependence of the non-equilibrium segregation of boron in low carbon steel. The experimental observations for the cooling rate dependence of the grain boundary segregation of boron are in good agreement with the time dependence of the grain boundary segregation of boron. The mechanisms of the non-equilibrium segregation of boron during cooling in low carbon steel are also discussed.

• Journal of the Korean Home Economics Association
• /
• v.46 no.1
• /
• pp.103-116
• /
• 2008

The purpose of this study was to empirically describe the everyday life of middle-aged adults in terms of their time-use activities. From the original '2004 Time dairy' Data, developed by the Korean National Statistical Office (KNOS), 17,684 respondents aged between 35-59 were selected. In order to categorize their activity patterns, work/labour, domestic labour, and spare leisure time were classified according to the action classification system. As a result, four dominant types were found: namely work-leisure, work-oriented, family-oriented, and leisure-oriented activities. Results of multinomial logistic analysis revealed that gender, age, socioeconomic status, job characteristic, and family structure were the major determinants on time-use. Compared with work-leisure, young middle aged women holding a part-time job with less income tended to be involved in a family-centered time use. Dual earners with lower SES status were likely to have work-oriented time schedules. Older men with relatively lower income were more likely to be involved in leisure-oriented activities rather than work-leisure activities. Multitasking behavior was a significant variable in explaining the four different types of time-use. Work-oriented group showed the highest level of time pressure as well as fatigue. Group differences in these measures, however, was not as large as expected.

• Nuclear Engineering and Technology
• /
• v.41 no.2
• /
• pp.187-198
• /
• 2009

In this paper, three power ramp tests performed on high burn-up Re-crystallized Zircaloy2 - UO2 BWR fuel rods (56 to 63 MWd/kgU) within the SCIP project are simulated with METEOR and ALCYONE 3D. Two of the ramp tests are of staircase type up to Linear Heat Rates of 420 and 520 W/cm and with long holding periods. Failure of the 420 W/cm fuel rod was observed after 40 minutes. The third ramp test consisted of a more standard ramp test with a constant power rate of 80 W/cm/min up to 410 W/cm with a short holding time. The tests were first simulated with the METEOR 1D fuel rod code, which gave accurate results in terms of profilometry and fission gas releases. The behaviour of a fuel pellet fragment and of the cladding piece on top of it was then investigated with ALCYONE 3D. The size and the main characteristics of the ridges after base irradiation and power ramp testing were recovered. Finally, the failure criteria validated for PWR conditions and fuel rods with low-to-medium burn-ups were used to analyze the failure probability of the KKL rodlets during ramp testing.