• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.581-591
• /
• 2017

Influences of hold time and stress ratio on cyclic creep properties of Grade 91 steel were systemically investigated using a wide range of cyclic creep tests, which were performed with hold times (HTs) of 1 minute, 3 minutes, 5 minutes, 10 minutes, 20 minutes, and 30 minutes and stress ratios (R) of 0.5, 0.8, 0.85, 0.90, and 0.95 under tension loading cycles at $600^{\circ}C$. Under the influence of HT, the rupture time increased to HT = 5 minutes at R = 0.90 and R = 0.95, but there was no influence at R = 0.50, 0.80, and 0.85. The creep rate was constant regardless of an increase in the HT, except for the case of HT = 5 minutes at R = 0.90 and R = 0.95. Under the influence of stress ratio, the rupture time increased with an increase in the stress ratio, but the creep rate decreased. The cyclic creep led to a reduction in the rupture time and an acceleration in the creep rate compared with the case of monotonic creep. Cyclic creep was found to depend dominantly on the stress ratio rather than on the HT. Fracture surfaces displayed transgranular fractures resulting from microvoid coalescence, and the amount of microvoids increased with an increase in the stress ratio. Enhanced coarsening of the precipitates in the cyclic creep test specimens was found under all conditions.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2016

Purpose: The purpose of the present study was to compare the effects of both general hold-relax techniques and hold-relax techniques using pumping on pain due to delayed muscle pain and on the range of motion (ROM) of joints. Methods: Thirty-nine young adult males and females were randomly assigned either to a hold-relax technique application group of 20 subjects or to a group of 19 subjects with hold-relax techniques applied using a pumping application. Tenderness thresholds, the ROM of joints, and pain intensities were measured on the biceps of the nondominant arm of the subjects in both groups before exercises were performed to induce delayed muscle pain. Tenderness thresholds were again measured 24hours, 48hours, and 72 hours after inducing delayed muscle pain. The relevant intervention methods were applied to the two groups after conducting the measurement at 48hours. As a statistical analysis method, repeated measure ANOVAs were conducted to examine the tenderness thresholds, ROMs of elbow joints, and pain intensities in the individual groups at the time points. Results: At 48 hours and 72 hours after application of the interventions, the general hold-relax technique application group showed greater changes in the tenderness thresholds, the ROMs of elbow joints, and the pain intensities than did the group applying hold-relax techniques using a pumping application (p>0.05). Conclusion: Based on the results of the present study, the application of hold-relax techniques is thought to have beneficial effects on pain resulting from delayed muscle pain and on limited ROMs of joints.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1317-1323
• /
• 2001

The circumstance is giving the blow against fishermen with the incoming-decreasing and the difficulty of crew's supply & demand and management. In addition, the depression of the external situation like the departure of WTO system and the plan of EEZ proclaim is forcing fishery into improving their fishing condition. By this international and domestic circumstance, development of the sea water cooling apparatus for fish hold storage is demanded sincerely. First of all, we Investigated load characteristics which based on development of sea water cooling system and optimum fish hold storage. The experimental results is as follows. In creasing the speed of compressor and mass blew rate of refrigerant, the temperature of NaCl solution is low. And the load characteristics experiment on fish hold storage outlet is as fellows. As time goes by, increasing the mass flow rate of NaCl solution, temperature difference between inlet and outlet is small in a model of fish hold storage. These results provide many useful informations applicable to an actual design of sea water cooling system and optimum fish hold storage.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1805-1810
• /
• 1991

This paper derives the upper and the lower bound of the mean cycle time and the mean service time of the class 6 and the class 4, within which the minimum utilization constrain of the class 4 is guaranteed. Also, derived are conditions under which the token bus network is stable or unstable. These bounds and stable conditions are represented in terms of the high priority token hold time, the token rotation time and the arrival rate and the total station number etc. This paper suggest a parameter tuning algorithm in a partially symmetric token bus network with two classes, which maximizes the token rotation time for a suitable high priority token hold time and at the same time meets the stability condition of the network, the real time constraint and the minimum utilization constraint of the class 4.

• Journal of the Korean Magnetics Society
• /
• v.15 no.6
• /
• pp.332-335
• /
• 2005

Output voltage of the flux-meter has always drift due to the input bias current of non-ideal operational amplifier. In this study we have employed a digital sample and hold amplifier which has no voltage drop to compensate drift of the flux-meter automatically. The drift of the developed flux-meter was smaller than $5{\times}10^{-8}\;Wb/s$ for the integration time constant of $RC=10^{-3}$ s.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2008

This paper studies a method to minimize the baseline wandering that make hard to extract R-wave in ECG. This method uses a difference signal between ECG and ascending slope tracing waves to minimize the baseline wandering. When the slope of ECG signal maintains the value or falls, the ascending slope tracing wave follows ECG signal directly, and this wave holds that value of ECG signal when the slope begins to rises in a certain time(=hold time). After this hold time, this wave traces ECG signal again. This method has been applied to MIT/BIH database to verify its efficacy and validity in practical applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3424-3432
• /
• 1996

For mechanical system operating at high temperature, damage due to the interaction effect of creep and fatigue plays an important role. The objective of this paper is to develop a modified creep-fatigue damage model which separately analyzes the pure creep damage for hold time and the creep-fatigue interaction damage during startup and shutdown period. The creep damage was calculated by the general creep damage equation and the creep-fatigue interaction damage was calculated by the modified equation which is based on the frequency modified strain range method with strain rate term. In order to verify the proposed model, a service of high temperature low cycle fatigue tests were performed. The test specimens were made from inconel-718 superalloy and the test parameters were wave shape and hold time. A good agreement between the predicted lives based on the proposed model and experimentally obtained ones was observed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.423-429
• /
• 2007

The clock recovery module of gap filler for satellite DMB is proposed. Proposed module sustains the output frequency of 10 MHz whether the received signal from the satellite is unstable or cut off within 0.5 sec. The advantages of this module is without frequency tuning at regular interval and low material cost. This module is fabricated by using CPLD as clock recovery IC and new type of loop filter for satisfying the fast lock time and long hold over time simultaneously. The measured performance of the fabricated module has a holdover time of 11 sec at frequency stability less than 0.01 ppm, and phase noise of -113 dBc/Hz at 100 Hz offset.

• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.114-121
• /
• 2019

The effect of injector driving current pattern on fuel injection rate of solenoid diesel common rail injector was studied by computer simulation. The time resolved fuel injection rate and injected quantity per stroke of a common rail injector driven with the five current patterns were computer simulated. The fuel injection rate and injected quantity per stroke according to the rail pressure and fuel injection period were also computer simulated. When the common rail injector was driven with the five driving current patterns of peak & hold, there was no difference in the fuel injection rate in the peak section regardless of all the current patterns of the five cases. On the other hand, the magnitude of the hold current value influenced the injection rate and injected quantity per stroke. That is, in the current pattern of three cases where the hold current value is equal to or more than a constant value of the peak current value, the fuel injection rates for the given common rail rail pressure and injection period are same one another. On the other hand, the current pattern of the two cases, in which the hold current value is smaller than a certain value, there is a large fluctuation in the fuel injection rate.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.1
• /
• pp.5-11
• /
• 2015

Background: The purpose of this study was to investigate the effects of Mulligan's straight leg raise with traction technique and hold-relax technique on flexibility of hamstring in people with shortened hamstring. Methods: Thirty two subjects participated in this study. The subjects were assigned to either the Mulligan's straight leg raise with traction technique group (n=16) or the hold-relax technique group (n=16). 90-90 straight leg raise test was performed for evaluation of hamstring shortening at initial time of study. After intervention, immediate effect (immediately after intervention) and lasted effect (60 min after intervention) were assessed. Results: In the both Mulligan's straight leg raise with traction technique and hold-relax technique groups, significant improvements on flexibility of hamstring was observed in immediately and 60 minute after intervention (p<.05). However, there are no significant difference was observed between groups (p>.05). Conclusion: In the results of this study, both Mulligan's straight leg raise with traction technique and hold-relax technique show immediately and 60 minute after evaluation effectiveness in flexibility of hamstring of people with shortened hamstring. In addition, although the difference is not statistically significant, Mulligan's straight leg raise with traction technique was more increased average extension angle of knee joint at 90-90 straight leg raise test than the hold-relax technique.