• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.810-816
• /
• 2009

The interactions between four Keggin-type POMs (${SiW_{12}O_{40}}^{4-},\;{PW_{12}O_{40}}^{3-},\;{SiMo_{12}O_{40}}^{4-},\;and\;{PMo_{12}O_{40}}^{3-}$) and glassy carbon (GC) and highly oriented pyrolytic graphite (HOPG) surfaces are investigated in a systematic way. Electrochemical results show that molibdate series POMs adsorb relatively stronger than tungstate POMs on GC and HOPG surfaces. Adsorption of POMs on HOPG electrode surfaces is relatively stronger than on GC surfaces. ${SiMo_{12}O_{40}}^{4-}$ species exhibits unique adsorption behaviors on HOPG surfaces. Surface-confined ${SiMo_{12}O_{40}}^{4-}$ species on HOPG surfaces exhibit unique adsorption behaviors and inhibit the electron transfer from the solution phase species. The catalytic activity of the surface-confined POMs for hydrogen peroxide electroreduction is also examined, where ${PW_{12}O_{40}}^{3-}$ species adsorbed on GC surfaces exhibits the highest catalytic efficiency among the investigated POM modified electrode systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.623-624
• /
• 2008

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.186-192
• /
• 2010

In situ electrochemical atomic force microscopy (ECAFM) observations of the surface of highly oriented pyrolytic graphite (HOPG) was performed before and after cyclic voltammetry in lithium bis(fluorosulfonyl)imide (LiTFSI) dissolved in 1-buthyl-2,3-dimethylimidazolium (BDMI)-TFSI to understand the interfacial reactions between graphite and BDMI-based ionic liquids. The formation of blisters and the exfoliation of graphene layers by the intercalation of $BDMI^+$ cations within HOPG were observed instead of reversible lithium intercalation and de-intercalation. On the other hand, lithium ions are reversibly intercalated into the HOPG and de-intercalatied from the HOPG without intercalation of the $BDMI^+$ cations in the presence of 15 wt% of 4.90 mol/$kg^{-1}$ LiTFSI dissolved in propylene carbonate (PC). ECAFM results revealed that the concentrated PC-based solution is a very effective additive for preventing $BDMI^+$ intercalation through the formation of solid electrolyte interface (SEI).

• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.95-100
• /
• 2018

The metal oxide/graphene nanocomposites are promising functional materials for high capacitive electrode material of secondary batteries, and high sensitive material of high performance gas sensors. In this study, vanadium dioxide($VO_2$) nanostructrures were grown on CVD graphene which was synthesized on Cu foil by thermal CVD, and exfoliated graphene which was exfoliated from highly oriented pyrolytic graphite(HOPG) using a vapor transport method. As results, $VO_2$ nanostructures on CVD graphene were grown preferential growth on abundant functional groups of graphene grain boundaries. The functional groups are served to nucleation site of $VO_2$ nanostructures. On the other hand, 2D & 3D $VO_2$ nanostructures were grown on exfoliated graphene due to uniformly distributed functional groups on exfoliated graphene surface. The characteristics of morphology controlled growth of $VO_2$/graphene nanocomposites would be applied to fabrication process for high capacitive electrode materials of secondary batteries, and high sensitive materials of gas sensors.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.531-538
• /
• 2004

Studies of adsorption isotherms with sharp step-wise layer condensation help us to better understanding of two dimensional layers. For this, an adsorption isotherm apparatus, using a phase modulated ellipsometric technique, has been constructed and an adsorption experiment has been performed. With subatomic scale resolution(∼0.3 $\AA$), the adsorption processes could be observed by ellipsometric signals. On measurement of multilayer adsorption of argon on highly oriented pyrolytic graphite(HOPG), thousands of adsorbed layers were observed at 34.04 K, which suggests that the adsorption is completely wet. On the contrary nine sharp layers of steps for adsorptions and desorptions were observed at 67.05 K. These isotherms obtained can provide a lot of information about thermodynamic states, bonding energies between adsobate and substrate, and structure transitions in the adsorbed film.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.3
• /
• pp.157-171
• /
• 1994

A scanning tunneling microscope has been built, which can resolve atomic arrangements of conductors and semiconductors in ultra high vacuum below $10^{-11}$ Torr. Its background and operational principles are reviewed and the guide lines in building the scanning tunneling microscope are shown. The results of measurements for highly oriented pyrolytic graphite and Si(111) surface are presented.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.1043-1046
• /
• 2004

The stability and electrochemical properties of a self-assembled layer of spinach ferredoxin on a quartz substrate and on a highly oriented pyrolytic graphite electrode were investigated. To fabricate the ferredoxin self-assembly layer, dimyristoylphosphatidylcholine was first deposited onto a substrate for ferredoxin immobilization. Surface analysis of the ferredoxin layer was carried out by atomic force microscopy to verify the ferredoxin immobilization. To verify ferredoxin immobilization on the lipid layer and to confirm the maintenance of redox activity, absorption spectrum measurement was carried out. Finally, cyclic-voltammetry measurements were performed on the ferredoxin layers and the redox potentials were obtained. The redox potential of immobilized ferredoxin had a formal potential value of -540 mV. It is suggested that the redox-potential measurement of self-assembled ferredoxin molecules could be used to construct a biosensor and biodevice.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.11-15
• /
• 2008

Metrology tools with the ability to measure spindle motion error on the order of a nanometer are required due to recent advances in nanotechnology. We propose a direct measurement method for the radial motion error of a precision spindle using a regular crystalline lattice and a scanning tunneling microscope (STM). A highly oriented pyrolytic graphite (HOPG) crystal combined with an STM is used as a two-dimensional reference scale. The measurement principle and the preliminary experimental results are discussed in this article. The preliminary experimental results demonstrated that the proposed method has the capability to incorporate a two-dimensional encoder to measure the spindle motion error.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.424-424
• /
• 2009

그라핀은 밴드갭이 없어서 세미메탈의 성질을 띠므로 초고속 RF 소자에는 응용이 가능하지만, 현재 사용되는 반도체 칩에 사용하기가 불가능하다. 그러나 그라핀을 매우 좁은 리본 형태로 만들 경우 밴드갭이 생기고 이에 따라 반도체특성을 뛰게 된다. 이러한 특성은 시뮬레이션을 통해서만 이해되다가 2007년 P. Kim이 그라핀 나노리본의 밴드캡이 리본의 폭이 좁아짐에 따라 증가함을 실험적으로 최초로 발표하였다. 하지만 그라핀을 나노리본형태로 식각 방법에 대해서는 정확히 연구되지 않았다. 따라서 본 연구에서는 $O_2$ plasma ashing 방법을 이용하여 그라핀을 식각하는 방법에 대해 연구하였다. 먼저 Si기판을 initial cleaning 한 후, highly-oriented pyrolytic graphite(HOPG)를 이용하여 기존의 mechanical exfoliation 방식을 통해 그라핀을 형성하였다. Photo-lithography 방법을 통하여 패터닝한 후, 그라핀을 식각하기 위하여 Reactive Ion Etcher (RIE) system을 이용한 $O_2$ plasma ashing을 50 W에서 1 분간 실시하였다. 다시 image reverse photo-lithography 과정과 E-beam evaporator system를 통해서 Al 전극을 형성하여 graphene-FET를 제작하였고, 광학 현미경과 AFM (Atomic force microscope)을 통해 두께를 확인하였다. 본 연구를 통하여 $O_2$ plasma ashing을 이용하여 쉽게 그라 E을 식각할 수 있음을 확인 하였으며, 제작된 소자의 전기적 특성에 대해서 현재 실험중에 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.90.2-90.2
• /
• 2012

Graphene has recently attracted significant attention because of its unique optical and electrical properties. For practical device applications, special attention has to be paid to the synthesis of high-quality graphene on large-area substrates. Graphene has been synthesized by eloborated mechanical exfoliation of highly oriented pyrolytic graphite, chemical reduction of exfoliated grahene oxide, thermal decomposition of silicon carbide, and chemical vapor deposition (CVD) on Ni or Cu substrates. Among these techniques, CVD is superior to the others from the perspective of technological applications because of its possibility to produce a large size graphene. PECVD has been demonstrated to be successful in synthesizing various carbon nanostructures, such as carbon nanotubes and nanosheets. Compared with thermal CVD, PECVD possesses a unique advantage of additional high-density reactive gas atoms and radicals, facilitating low-temperature, rapid, and controllable synthesis. In the current study, we report results in synthesizing of high-quality graphene films on a Ni films at low temperature. Controllable synthesis of quality graphene on Cu foil through inductively-coupled plasma CVD (ICPCVD), in which the surface chemistry is significantly different from that of conventional thermal CVD, was also discussed.