• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.453-461
• /
• 1999

The estimation of fatigue life at the design stage is very important in order to arrive at feasible and cost effective solutions considering the total lifetime of the structure and machinery compo-nents. In this study the practical procedure of prediction of fatigue life by use of cumulative damage factors based on Miner-Palmgren hypothesis and probability density function is shown with a $135,000m^3$ LNG tank being used as an example. In particular the parameters of Weibull distribution taht determine the stress spectrum are dis-cussed. At the end some of uncertainties associated with fatigue life prediction are discussed. The main results obtained from this study are as follows: 1. The practical procedure of prediction of fatigue life by use of cumulative damage factors expressed in combination of probability density function and S-N data is proposed. 2. The calculated fatigue life is influenced by the shape parameter and stress block. The conser-vative fatigue design can be achieved when using higher value of shape parameter and the stress blocks divded into more stress blocks.

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.72-80
• /
• 2014

This study proposed a wind power generation system utilizing outdoor air on the rooftop and indoor ventilation, which would increase according to the building height, as a way to help to save energy consumption in a building by using wind power energy of the new renewable energy sources. The study measured the distribution of air currents and power generation according to the usage factor of exhaust pipes in the kitchen and bathroom and identified the elements to consider when applying a wind power generation system to buildings in order to use outdoor air on the rooftop increasing according to the height and the indoor ventilation produced in the facility vertical shafts inside the buildings by installing a wind power generation system on the rooftop. (1) The study measured the ventilation velocity of the kitchen hood and bathroom ventilation fan by changing the zone areas by the households according to the usage factor of [${\alpha}$]=33~100%. As a result, the kitchen ventilation pipe generated the ventilation wind of 3.0m/s or more at the usage factor of [${\alpha}$] 66% or higher, and the bathroom ventilation pipe generated ventilation velocity lower than 3.0m/s, the blade velocity of the wind power generator, even after the usage factor rose to [${\alpha}$]=100%. (2) As the old bathroom ventilation pipe generated the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, even with the rising usage factor [${\alpha}$], the application of an outdoor air induction module increased the ventilation velocity by 2.9m/s at the usage factor of [${\alpha}$]=33%, 3.8m/s at the usage factor of [${\alpha}$]=66%, and 3.6m/s at the usage factor of [${\alpha}$]=100%. Thus the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, or higher was secured. (3) The findings prove that the applicability of a wind power generation system using outdoor air on the rooftop and indoor ventilation is excellent, which raises a need for various efforts to increase the possibility of its commercialization such as securing its structural stability according to momentary gusts on the rooftop and typhoons in summer and making the structure light to react to the wind directions of outdoor air on the rooftop according to the seasons.

• 한국대기환경학회지
• /
• 제32권4호
• /
• pp.384-393
• /
• 2016

In this study, two kinds of industrial filter bags were tested for their filtration performance to apply the existing bag filter systems. Experimental variables were examined for pressure drop, cleaning interval, residual pressure drop, cleaning efficiency, fractional grade efficiency, total collection efficiency according to the filter bag structure. According to these results, the filter bags tested in this study demonstrated good performance in dust collection. This was also true for the double surface filter bag. The lifetime was longer than the round type filter bag because the filtration area was more than 1.6 times wider and the filter quality factor was much higher. Therefore, double surface filter bags are suggested to be used in order to increase filtration performance of the bag filter systems.

• 한국전자파학회논문지
• /
• 제15권2호
• /
• pp.172-177
• /
• 2004

본 논문에서는 기존의 DGS를 LTCC 공정기술을 이용해서, 적층구조에 적용해 보았다. 크기 축소 및 품질계수를 높이기 위해서 나선형 DGS를 사용하였으며, 적층 구조에서 기존의 DGS와 같은 공진 특성을 나타내는 것을 확인하였다. 2개의 나선형 DGS를 결합하여, 새로운 형태의 2단 적층 대역통과 여파기를 구성하였으며, 공정상의 편의를 위해서 비아(Via-Hole)가 없도록 설계하였다. 5.25 GHz 대역 무선랜용 대역통과 여파기를 설계 제작하였으며, 제작한 여파기의 삽입손실은 1.5 dB 이내이며, 크기는 2.0 mm${\times}$1.2 mm${\times}$1.1 mm(L${\times}$W${\times}$H)로 저손실의 초소형 여파기 제작에 적합함을 확인하였다.

• 마케팅과학연구
• /
• 제16권3호
• /
• pp.107-123
• /
• 2006

본 연구에서는 선행요인인 서번트 리더십, 매개요인인 리더에 대한 신뢰, 그리고 결과요인인 리더만족, 추가적 노력 사이에 어떠한 관계가 있는지에 대한 모형을 제시하고 이들 요인 상호간의 관련성을 검증해 보고자 한다. 실증분석을 위한 측정대상은 서울, 경주, 부산 대구 지역의 특1급 관광호텔 종사원으로 한정하였으며, 특히 호텔종사원을 측정대상으로 한 것은 호텔 조직이 리더와 구성원간의 행동반응이 민감하게 나타나므로 본 연구의 유용성을 정확하게 판별하기 위해서이다. 본 연구에서는 서번트 리더십에 대한 기초이론을 체계화하였고 다음으로 서번트 리더십 관련 기존 연구에서는 서번트 리더십에 대한 요인구조를 제시하여 주지 못하고 있으나, 본 연구에서는 호텔종사원을 대상으로 서번트 리더십의 요인구조를 탐색적으로 보여 주었다는 점이고 또한 호텔기업의 인사관리자의 입장에서 리더십 프로그램을 분별하는데 있어 하나의 기준이 될 수 있다. 특히, 신입사원의 서번트 리더십을 배양하기 위해서는 서번트 리터십의 하위 행동특성이라고 할 수 있는 도덕성과 자긍심 정도는 검증해 볼 필요가 있다. 그리고 조직의 목표를 효과적으로 달성하기 위한 중간관리자의 변화를 위해 서번트 리더십 육성프로그램을 개발하는데 사용될 수 있다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.106-106
• /
• 2015

The information of flow regimes continues to be norm in water resource and watershed management, in that stream flow regime is a crucial factor influencing water quality, geomorphology, and the community structure of stream biota. The objectives of this study were to estimate Korean stream flows from landscape variables, classify stream flow gages using hydraulic characteristics, and then apply these methods to ungaged biological monitoring sites for effective ecological assessment. Here I used a linear modeling approach (MLR, PCA, and PCR) to describe and predict seasonal flow statistics from landscape variables. MLR models were successfully built for a range of exceedance discharges and time frames (annual, January, May, July, and October), and these models explained a high degree of the observed variation with r squares ranging from 0.555 (Q95 in January) to 0.899 (Q05 in July). In validation testing, predicted and observed exceedance discharges were all significantly correlated (p<0.01) and for most models no significant difference was found between predicted and observed values (Paired samples T-test; p>0.05). I classified Korean stream flow regimes with respect to hydraulic and hydrologic regime into four categories: flashier and higher-powered (F-HP), flashier and lower-powered (F-LP), more stable and higher-powered (S-HP), and more stable and lower-powered (S-LP). These four categories of Korean streams were related to with the characteristics of environmental variables, such as catchment size, site slope, stream order, and land use patterns. I then applied the models at 684 ungaged biological sampling sites used in the National Aquatic Ecological Monitoring Program in order to classify them with respect to basic hydrologic characteristics and similarity to the government's array of hydrologic gauging stations. Flashier-lower powered sites appeared to be relatively over-represented and more stable-higher powered sites under-represented in the bioassessment data sets.

• Macromolecular Research
• /
• 제14권1호
• /
• pp.73-80
• /
• 2006

Sulfonated poly(ethylene glycol) (PEG-$SO_{3}$) grafted polyrotaxanes (PRx-PEG-$SO_{3}$) were prepared in order to utilize the unique properties of PEG-$SO_{3}$ and the supramolecular structure of PRx, in which PEG-$SO_{3}$ grafted $\alpha$-cyclodextrins ($\alpha$-CDs) were threaded onto PEG segments in a PEG-b-poly(propylene glycol) (PPG)-b-PEG triblock copolymer (Pluronic) chain capped with bulky end groups. Some of the PRx-PEG-$SO_{3}$ demonstrated a higher anticoagulant activity in case of PRx-PEG-$SO_{3}$ (P 105), and compared with the control they showed a lower fibrinogen adsorption in PRx-PEG-$SO_{3}$ (F68) and a higher binding affinity with fibroblast growth factor. The obtained results suggested that polyrotaxane incorporated with PEG-$SO_{3}$ may be applicable to the surface modification of clinically used polymers, especially for blood/cell compatible medical devices.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.241-260
• /
• 2020

This article presented a comprehensive model to study static buckling stability and associated mode-shapes of higher shear deformation theories of sandwich laminated composite beam under the compression of varying axial load function. Four higher order shear deformation beam theories are considered in formulation and analysis. So, the model can consider the influence of both thick and thin beams without needing to shear correction factor. The compression force can be described through axial direction by uniform constant, linear and parabolic distribution functions. The Hamilton's principle is exploited to derive equilibrium governing equations of unified sandwich laminated beams. The governing equilibrium differential equations are transformed to algebraic system of equations by using numerical differential quadrature method (DQM). The system of equations is solved as an eigenvalue problem to get critical buckling loads and their corresponding mode-shapes. The stability of DQM in determining of buckling loads of sandwich structure is performed. The validation studies are achieved and the obtained results are matched with those. Parametric studies are presented to figure out effects of in-plane load type, sandwich thickness, fiber orientation and boundary conditions on buckling loads and mode-shapes. The present model is important in designing process of aircraft, naval structural components, and naval structural when non-uniform in-plane compressive loading is dominated.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.47-54
• /
• 1999

It is well known that solidification cracking often occurs in welds of root pass for one-side welding under the conditions of high welding currents and speeds. In this study, the solidification in 590MPa class steel for pressure vessels SPPV490 was investigated by using flux-cored arc welding(FCAW) with 4 types of welding wires and welding conditions of 200∼280A and 2.8∼ 4.2mm/sec. In order to compared the result of cracking in SPPV490, 0.2%C steel for welded structure of SWS400 and 0.45%C steel for machine structural SM45C were also used as base metals. As the results, all the cracks formed in some welding conditions were observed near the center of weld bead. The solidification cracks were generally initiated near the upper surface of bead and propagated toward the inner part. The solidification cracking generally increased with welding current and welding speed in the same base metal and welding material. In cracking susceptibility, SPPV490 showed higher cracking susceptibility than SWS400 in all welding conditions and welding materials. It was considered that cracking susceptibility could not be evaluated with the hardness of weld metals. The cracking ratio increased with decreasing of a/b(a and b; the width of the upper surface and the back surface of the bead) as shape factor of bead. The cracking tendency with shape factor of bead was extended under the condition of higher welding currents.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.169.2-169.2
• /
• 2015

$VO_2$ is a well-known a metal-to-insulator-transition (MIT) material, accompanied with a first order structural phase transition near room temperature. Because of the structural phase transition and the MIT occur near a same temperature, there is an ongoing argument whether the MIT is induced by the structural phase transition. $VO_2$ exhibits a relatively weak anti-oxidization ability and can be oxidized to higher-valence oxides (e.g., $V_4$ $O_7$ or $V_2$ $O_5$) when annealed at a high temperature in an oxygen-rich atmosphere. We fabricated $VO_2$ films on $Al_2$ $O_3$ (0001) substrates using a DC magnetron sputtering deposition process with carefully control the $O_2$ percentage in an atmosphere. X-ray diffraction measurements from the films showed only (0l0) peaks with no extra peaks, indicating b-oriented films. The temperature-dependent local structural properties of $VO_2$ films were investigated by using in-situ X-ray absorption fine structure (XAFS) measurements at the V K edge. XAFS revealed that the structural phase transition was occurred nearly $70^{\circ}C$ for heating process and reproducible. Resistance measurements as a function of temperature (R-T) demonstrated that the resistance of $VO_2$ films was changed by a factor of 4 near $75^{\circ}C$ which was higher than $68^{\circ}C$ reported from a $VO_2$ bulk. We will discuss the MIT of $VO_2$ films, comparing with the local structural properties determined by XAFS measurements.