• 제목/요약/키워드: Higher power rate

검색결과 1,125건 처리시간 0.031초

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁;김용운
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.65-83
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

  • PDF

태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구 (Simulation of Drying Grain with Solar-Heated Air)

  • 금동혁
    • Journal of Biosystems Engineering
    • /
    • 제4권2호
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

Arthrospira platensis 추출물의 항산화 및 UVB에 의해 유도된 활성산소 생성에 미치는 영향 (Antioxidant Effect of Arthrospira platensis Extract and Effect on UVB-induced Free Radical Production)

  • 김민승;양재찬;김보애
    • 한국응용과학기술학회지
    • /
    • 제37권2호
    • /
    • pp.153-161
    • /
    • 2020
  • 지구상에서 가장 오래된 해양 미세조류로 알려진 스피룰리나는 인체에 필요한 영양성분을 대부분 함유하고 있는 것으로 알려져 있다. 그 구성성분으로는 phycocyanin, chlorophyll, β-carotene 과 같은 다양한 물질을 다량 함유한다고 보고되고 있으며, 노화 및 미백효과가 있다고 알려져 있다. 본 연구에서는 스피룰리나 정제수 추출물의 UVB로 유도된 활성산소종 ROS (reactive oxygen species) 소거능과 항산화능을 확인하였다. 스피룰리나 정제수 추출물 0.05, 0.10, 0.50 1.0 mg/mL의 DPPH 라디칼 소거능, FRAP 환원능 및 ABTS+ 라디칼 소거능을 측정하여 항산화효과를 확인하였다. 대체실험동물모델인 Zebrafish를 이용하여 스피룰리나 정제수 추출물을 0.05, 0.10, 0.50 mg/mL 농도로 처리하여 응고율, 부화율, 심장독성을 측정하였으며, 스피룰라나 추출물을 0.05, 0.10, 0.50 mg/mL 농도로 처리한 후, DCFH-DA로 염색하여 UVB로 유도된 ROS 저해효과를 확인하였다. 항산화효과 측정 결과 양성대조군인 ascorbic acid와 비교시 DPPH, Frpa, ABTS 모두 농도 의존적으로 항산화 효과가 있음을 확인하였다. 대체 실험동물인 Zebrafish를 이용하여 응고율과 부화율, 심박수를 측정한 결과 0.5 mg/mL을 제외한 0.05, 0.10 mg/mL에서는 대조군과 비교 시 독성이 없음을 확인 하였다. UVB로 유도된 Zebrafish의 ROS 소거능은 양성대조군에 비해 높은 ROS 감소 효과를 나타내었다. 본 연구의 결과는 스피룰라나 정제수 추출물이 자외선 및 피부 보호 화장품 소재로 사용가치가 있음을 시사한다.

Rett 증후군 환자에서의 자율신경 활성도 및 심박수 변이도 측정 (Heart Rate Variability and Autonomic Activity in Patients Affected with Rett Syndrome)

  • 최덕영;장진하;정희정
    • Clinical and Experimental Pediatrics
    • /
    • 제46권10호
    • /
    • pp.996-1002
    • /
    • 2003
  • 목 적 : Rett 증후군 환자에서는 일반인에서 보다 돌연사의 확률이 높은 것으로 알려져 있으며, 그 원인으로 자율신경계 기능 부전에 의한 치명적인 부정맥 같은 심장의 전기 생리적 불안정성이 가장 의심되고 있다. 본 연구는 Rett 증후군 환자에서 심박수 변이도와 교정 QT 간격을 측정하여 실제로 자율신경 활성도에 문제가 있는지의 여부를 확인하기 위하여 실시하였다. 방 법 : 분자유전학적 염색체검사나 임상적 진단기준에 의하여 진단된 Rett 증후군 환자 12례를 대상군으로, 나이가 비슷한 정상아 30례를 대조군으로 하여 이들에서의 자율신경 활성도인 심박수 변이도와 교정 QT 간격을 측정하여 비교하였다. 심박수 변이도는 24시간 보행 심전도를 기록한 후 디지털화 된 심전도를 자동적으로 분석하여 power spectrum을 만들고 그 중 주파수영역(고주파 성분, 저주파 성분, 극소저주파 성분, LF/HF 비율)과 시간 영역(평균 RR 간격, SDNN, rMSSD, pNN50), 교정 QT 간격을 측정하여 비교하였다. 비교는 세 그룹으로 나누어서 전체 Rett 증후군과 정상 대조군 사이, 전형적인 Rett 증후군과 정상 대조군 사이, 비전형적 Rett 증후군과 정상 대조군 사이에서 실시하였다. 결 과 : 1) Rett 증후군 환자에서는 대조군에서 보다 시간영역의 rMSSD이 통계적으로 의미있게 낮았고(P<0.005), LF/HF 비율이 의미있게 높았으며(P<0.005), 교정 QT 간격도 의미있게 연장되어(P<0.005) 있었다. 2) 전형적인 Rett 증후군 환자에서도 대조군에서 보다 rMSSD이 통계적으로 의미있게 낮았고(P<0.005), LF/HF 비율도 의미있게 높았으며(P<0.05), 교정 QT 간격도 의미있게 연장되어 있었다(P<0.001). 3) 비전형적 Rett 증후군에서도 마찬가지로 rMSSD이 통계적으로 의미있게 낮았고(P<0.05), LF/HF 비율도 의미있게 높았으며(P<0.001), 교정 QT간격도 의미있게 연장되어 있었다(P<0.05). 4) 이상의 결과에서 Rett 증후군에서는 전형적인 환자나 비전형적인 환자 모두 미주신경긴장의 변화와 호흡에 의해 민감한 영향을 받는 rMSSD의 저하가 있었고, 교감-부교감신경 균형성을 나타내는 LF/HF 비율의 증가가 있었으며, 자율신경계에 영향을 받는 교정 QT 간격이 연장되었던 것으로 보아, 교감-부교감신경의 균형성에 이상이 있는 것으로 사료된다. 결 론 : Rett 증후군 환자에서 자율신경 활성도의 지표인 심박수 변이도의 의미있는 저하와 교정 QT 간격의 의미있는 연장이 나타나는 것으로 미루어 보아, 이 질환에서 자주 동반되는 돌연사가 일어나는 원인 중의 하나로 이러한 교감-부교감신경의 불균형을 의심할 수 있겠다.

O2/SF6, O2/N2와 O2/CH4 플라즈마를 이용한 폴리카보네이트 건식 식각 (Dry etching of polycarbonate using O2/SF6, O2/N2 and O2/CH4 plasmas)

  • 주영우;박연현;노호섭;김재권;이성현;조관식;송한정;전민현;이제원
    • 한국진공학회지
    • /
    • 제17권1호
    • /
    • pp.16-22
    • /
    • 2008
  • [ $O_2/SF_6$ ], $O_2/N_2$ 그리고 $O_2/CH_4$의 혼합 가스를 이용하여 폴리카보네이트의 플라즈마 식각을 연구하였다. 플라즈마 식각 장비는 축전 결합형 플라즈마 시스템을 사용하였다. 폴리카보네이트 식각은 감광제 도포 후에 UV 조사의 포토리소그래피 방법으로 마스크를 제작하여 실험하였다. 본 식각 실험에서는 $O_2$와 다른 기체와의 혼합비와 RIE 척 파워 증가에 따른 폴리카보네이트의 식각 특성 연구를 중심으로 하였다. 특히 건식 식각 시에 사용한 공정 압력은 100 mTorr로 유지하였으며 공정 압력은 기계적 펌프만을 사용하여 유지하였다. 식각 실험 후에 표면 단차 측정기, 원자력간 현미경 그리고 전자 현미경 등을 이용하여 식각한 샘플을 분석 하였다. 실험 결과에 의하면 폴리카보네이트 식각에서 $O_2/SF_6$의 혼합 가스를 사용하면 순수한 $O_2$$SF_6$를 사용한 것보다 각각 약 140 % 와 280 % 정도의 높은 식각 속도를 얻을 수 있었다. 즉, 100 W RIE 척 파워와 100 mTorr 공정 압력을 유지하면서 20 sccm $O_2$의 플라즈마 식각에서는 약 $0.4{\mu}m$/min, 20 sccm의 $SF_6$를 사용하였을 때에는 약 $0.2{\mu}$/min의 식각 속도를 얻었다. 그러나 60 %의 $O_2$와 40 %의 $SF_6$로 혼합된 플라즈마 분위기에서는 20 sccm의 순수한 $O_2$에 비해 상대적으로 낮은 -DC 바이어스가 인가되었음에도 식각 속도가 약 $0.56{\mu}m$/min으로 증가하였다. 그러나 $SF_6$ 양의 추가적인 증가는 폴리카보네이트의 식각 속도를 감소시켰다. $O_2/N_2$$O_2/CH_4$의 플라즈마 식각에서는 $N_2$$CH_4$의 양이 각각 증가함에 따라 식각 속도가 감소하였다. 즉, $O_2$$N_2$$CH_4$의 혼합은 폴리카보네이트의 식각 속도를 저하시켰다. 식각된 폴리카보네이트의 표면 거칠기 절대값은 식각 전에 비해 $2{\sim}3$ 배정도 증가하였지만 전자현미경으로 표면을 관찰 하였을 때에는 식각 실험 후의 폴리카보네이트의 표면이 깨끗한 것을 확인할 수 있었다. RIE 척 파워의 증가는 -DC 바이어스와 폴리카보네이트의 식각 속도를 거의 선형적으로 증가시켰으며 이 때 폴리카보네이트의 감광제에 대한 식각 선택비는 약 1:1 정도였다. 본 연구의 의미는 기계적 펌핑 시스템만을 사용한 간단한 플라즈마 식각 시스템으로도 $O_2/SF_6$의 혼합 가스를 사용하면 폴리카보네이트의 미세 구조를 만드는데 사용이 가능하며 $O_2/N_2$$O_2/CH_4$의 결과에 비해 상대적으로 우수한 식각 조건을 얻을 수 있었다는 것이다. 이 결과는 다른 폴리머 소재 미세 가공에도 응용이 가능하여 앞으로 많이 사용될 수 있을 것으로 예상한다.

구멍갈파래의 효소 가수분해 증진을 위한 마이크로파 이용 열수 전처리 (Hydrothermal Pretreatment of Ulva pertusa Kjellman Using Microwave Irradiation for Enhanced Enzymatic Hydrolysis)

  • 김정민;하성호
    • Korean Chemical Engineering Research
    • /
    • 제53권5호
    • /
    • pp.570-575
    • /
    • 2015
  • 녹조류는 cellulose가 세포벽의 주요 구성성분이며 그 양이 다른 해조류에 비해 월등하고, 세포벽에 lignin이 없어 lignin 제거공정을 거치지 않고 cellulase를 사용하여 쉽게 당화시킬 수 있을 뿐만 아니라 저장산물인 전분도 당 성분으로 사용할 수 있다. 이에 바이오에너지 생산을 위한 좋은 바이오매스가 될 것으로 기대되는 녹조류인 구멍갈파래(Ulva pertusa Kjellman)를 사용하여 마이크로웨이브 장치를 통한 열수 전처리 효과가 cellulase를 사용한 가수분해 효율에 미치는 영향을 알아보았다. 열수의 온도에 따른 전처리 효과를 확인하기 위해 $100{\sim}150^{\circ}C$에서 전처리를 수행하였으며, $140{\sim}150^{\circ}C$에서 가장 높은 전처리 효과를 얻었다. 또한 전처리 최적조건인 마이크로웨이브 장치의 출력 50W와 온도$150^{\circ}C$에서 열수 전처리한 구멍갈파래에 포함되어 있는 탄수화물의 효소적 가수분해 효율을 높이기 위해 cellulase 외에 ${\alpha}$-amylase와 ${\beta}$-glucosidase를 함께 사용하여, 효소 혼합의 효과를 확인하였다. 전처리한 구멍갈파래 시료에 cellulase와 ${\alpha}$-amylase 그리고 ${\beta}$-glucosidase 활성을 가지는 Novozyme 188을 사용하여 가수분해하였을 경우 전처리하지 않은 구멍갈파래 시료와 비교하면 초기 가수분해속도가 6배 이상 월등히 높았고, 3시간 만에 구멍갈파래에 포함되어 있는 탄수화물의 96 wt%에 해당할 정도의 환원당이 생성되었으며, 이 양은 전처리하지 않은 구멍갈파래 시료를 24시간동안 효소적 가수분해해야 얻을 수 있는 환원당의 양으로 열수 전처리한 효과가 월등함을 보여주었을 뿐만 아니라 대부분의 탄수화물이 전환되는 최대 당화 효율을 얻을 수 있음을 보여준다.

서울 시내 일부 중년층 남성의 금연 결정요인에 관한 연구 (A Study on the Determinants of Stop Smoking by Some Middle-aged Men in Seoul)

  • 김은지;김명
    • 보건교육건강증진학회지
    • /
    • 제8권1호
    • /
    • pp.45-58
    • /
    • 1991
  • The purpose of this study was to investigate determinants of stop smoking. The data on which the analysis was based come from a survey of 355 middle-aged men in Seoul. The data was analyzed using proportion, x²-test, Pearson's Correlation Coefficient and Stepwise Multiple Regression. The following were the results; 1. Success rate of stop smoking is 19.9% of 229 persons who attempted to quit smoking. 2. As for the number of quit attempts, 33.3% of ex-smokers tried once; 25.4% of current smokers tried twice. 3. As for methods of quit attempts ex-smokers showed higher tendency in using will power and books/guides than current smokers who in using will power alone. 4. For the attitudes on smoking of family, the majority of ex-smokers and current smokers were opposed absolutely. 5. The main opposite to smoking were wives in cases of both ex-smokers and current smokers, but More ex-smokers answered that the main opposite to smoking were others than current smokers. 6. As for the measures of smoking in the office, more ex-smokers answered inviting than current smokers and more current smokers assigned a smoking spot than ex-smokers. 7. Majority of ex-smokers approve of restriction at public spot strongly. 8. As for the attitude about caution on a cigarette case, more ex-smokers insisted than current smokers. 9. There was a relation between the degree of exposure about knowledge and the degree of knowledge. 10. Stepwise Multiple Regression portray that following factors influence stop smoking in order named. (1) attitude on the smoking restriction at public spot, (2) methods of quit attempt, (3) attitude about caution on cigarette case. Even so, it turned out that these factors alone can explain only 20% of self-examination. Therefore study for the other factors ought to be continued. I submit following suggestions ending this study. 1. Continuous study of the other factors affecting stop smoking must be carried on. 2. Since there was a relation the degree of exposure about knowledge and the degree of knowledge, efficient health education is required using campaign and mass media.

  • PDF

화학수소화합물을 이용한 소형 무인항공기용 연료전지 시스템 연구 - II. 경량 연료전지 추진 시스템 (Fuel cell system for SUAV using chemical hydride - II. Lightweight fuel cell propulsion system)

  • 홍지석;박진구;성명훈;전창수;성홍계;신석재;남석우
    • 한국항공우주학회지
    • /
    • 제41권3호
    • /
    • pp.233-239
    • /
    • 2013
  • 화학수소화합물 수소저장방법을 이용한 100 W 급 연료전지 시스템을 소형 무인항공기의 추진시스템으로 적용하는 연구를 수행하였다. 소형/경량 수소 발생 제어장치와 연료전지/배터리 하이브리드 전력 공급 방법으로 효율성 및 안정성을 증대하였다. $NaBH_4$ 수용액을 이용한 수소 발생장치와 Dead-end 형식의 PEMFC를 이용한 연료전지 시스템의 지상, 비행 시험이 수행되었다. 연료전지 스택을 안정적으로 운전하고, 높은 효율을 얻기 위해 45 kPa의 압력을 가하는 방법을 적용하였다. 수소 발생 시스템 내부 압력을 이용한 수소 발생 제어 장치는 45~55 kPa 사이에서 유지되며 안정적으로 수소가 공급되는 것을 확인하였다. 그 결과, 100 W 연료전지 시스템이 소형 무인항공기 적용하기에 무게 및 소비 전력을 만족함을 확인하였고, 시험비행을 통해 성능을 입증하였다.

전신진동운동이 드랍랜딩점프 동작에 미치는 영향 (Effect of Whole Body Vibration Training in Drop Landing Jump)

  • 홍수연;장영관;김진현
    • 한국산학기술학회논문지
    • /
    • 제19권3호
    • /
    • pp.423-429
    • /
    • 2018
  • 연구목적 본 연구의 목적은 전신진동운동(whole body vibration exercise)이 드랍랜딩점프(drop landing jump) 동작에 미치는 영향을 규명하는 것으로 진동운동그룹(n=5, VEG, Vibration Exercise Group)과 단순운동그룹(n=5, OEG, Only Exercise Group)을 4주 동안 트레이닝 시킨 후 운동 전과 운동 4주 후 변화를 비교 분석하였다. 실험방법 3차원 영상 데이터는 10개의 적외선카메라(Vicon, UK)를 샘플링 율, 100 Hz.를 사용하여 획득하였으며, 하지 관절의 파워는 2대의 지면반력기(AMTI, USA)를 샘플링 율 1000Hz.로 데이터를 획득 하였다. 연구결과 첫째, 무게중심의 변동성은 하강국면에서 가장 크게 나타나 점프 후 착지 시 상해위험성이 큰 것으로 나타났다. 둘째, 진동운동그룹은 훈련기간에 관계없이 단순운동그룹보다 점프높이가 증가하였다. 셋째, 운동그룹간의 관절파워가 4주 훈련 후 엉덩관절 P1(굴곡)과 무릎관절 P2(신전)에서 통계적으로 유의한 차이를 보였으나, 훈련기간에 따른 하지의 관절파워는 모든 국면과 운동그룹에 관계없이 통계적으로 유의한 차이를 보이지 않았다. 결론 훈련기간에 관계없이 진동과 운동을 병행한 진동운동그룹이 운동만을 수행한 단순운동그룹보다 점프높이에 증가를 가져왔으나 점프높이와 하지의 관절 파워와의 일관성 규명할 수 없었다.

제주지역 거시경제 전망모형을 이용한 정책효과 분석 (An Analysis on the Effect of Policy Using Macro-economic Forecasting Model of Jeju)

  • 고봉현
    • 한국산학기술학회논문지
    • /
    • 제21권5호
    • /
    • pp.458-465
    • /
    • 2020
  • 본 연구의 목적은 제주지역 거시경제 전망모형을 이용하여 제주지역 사회의 중요한 정책에 대한 효과분석을 수행하는 것이다. 이를 위해, 본 연구에서는 기존의 Ko, et al.(2012) 모형을 본 연구의 목적에 맞게 확대·개편하였다. 연구의 주요 결과를 요약하면 다음과 같다. 첫째, 정책효과 분석을 위해, 2017년까지의 관련 통계자료와 데이터베이스를 갱신·점검하고, 새로운 대내외 정책변수들과 모듈(module)을 확대·추가함으로써 모형의 현실 설명력을 향상시켰다. 그리고 제주경제의 산업구조 변화에 따라 모형에서 설정된 산업구조를 보다 세분화시켰으며, 특히 케인즈 이론의 수요측면까지 모형에서 동시에 고려할 수 있도록 모형의 구조를 확장시켰다. 둘째, 모형의 평가에서는 구(舊)모형에 비해 본 연구의 모형에 대한 예측력이 우수한 것으로 평가되었다. 다만, 일부 내생변수에서 향후 지속적인 자료의 보완을 통해 보다 개선된 모형 개발의 시사점을 얻을 수 있었다. 셋째, 제2공항 건설에 따른 정책효과 분석결과, GRDP 1.25배, 고용 1.2배, 민간소비 1.48배, 투자 2.06배 증대되는 효과를 보이는 것으로 분석되었다. 그리고 경제성장률은 제2공항을 건설할 경우가 그렇지 않을 때보다 연평균 1.6%p 높은 것으로 분석되었다. 마지막으로 본 연구의 결과는 제주특별자치도의 정책의 사결정에 있어 직·간접적으로 활용될 수 있을 것으로 기대된다.