• Title/Summary/Keyword: Higher order of convergence

Search Result 607, Processing Time 0.025 seconds

아연도금 부스 환기시스템 개선에 관한 수치해석 (Numerical Analysis on the Improvement of Zinc Plating Booth Ventilation System)

  • 진도훈
    • 한국산업융합학회 논문집
    • /
    • 제24권1호
    • /
    • pp.45-51
    • /
    • 2021
  • The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

Global Positioning System and Strengthening of Geodetic Network of Nepal

  • Adhikary, Krishna Raj;Mahara, Shree Prakash
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.955-958
    • /
    • 2003
  • Nepal is a country of mountains The higher order geodetic points were mostly established on the top of mountains and these points were used for the geodetic network extension. Lower order geodetic control networks were established at different times and used for the surveying and mapping activities of the country.. It has been found that the rate of convergence between north and south borders of Nepal to be 21${\pm}$2 mm each year and the rate translation of Kathmandu to 55${\pm}$3 mm/year to the plates. The most intense deformation in Nepal occurs along the belt of high mountains along its northern border res ulting in a strain contraction rate normal to the Himalayan Arc. This belt is approximately 40 km wide and extends into southern Tibet.( 13). Recently Survey Department of Nepal has lunched a program of strengthening the existing geodetic network of Nepal and re-observed the position of higher order geodetic points by using geodetic GPS receivers to evaluate their position and thus to define the precision of the control points once again. This paper describes the observation procedure and the adjustment results of the existing higher order control network of Nepal established in different time using different types of equipment and techniques; and highlights the observation procedure and the result obtained after the post processing of the GPS observation results. Attempt has been made to give the procedure and identify the methodology for the re observation of existing higher order geodetic points by using GPS receiver and post processing the observed data so that the existing higher order geodetic points are within the given accuracy standard.

  • PDF

최소 제곱 무요소법을 이용한 선형 탄성 변형 해석 (The Least-Squares Meshfree Method for Linear Elasticity)

  • 권기찬;박상훈;윤성기
    • 대한기계학회논문집A
    • /
    • 제26권11호
    • /
    • pp.2312-2321
    • /
    • 2002
  • The first-order least-squares meshfree method for linear elasticity is presented. The conventional and the compatibility-imposed least-squares formulations are studied on the convergence behavior of the solution and the robustness to integration error. Since the least-squares formulation is a type of mixed formulation and induces positive-definite system matrix, by using shape functions of same order for both primal and dual variables, higher rate of convergence is obtained for dual variables than Galerkin formulation. Numerical examples also show that the presented formulations do not exhibit any volumetric locking for the incompressible materials.

고차 미분에너지 기반 노인 음성에서의 음성 구간 검출 알고리즘 연구 (Development of Voice Activity Detection Algorithm for Elderly Voice based on the Higher Order Differential Energy Operator)

  • 이지연
    • 디지털융복합연구
    • /
    • 제14권11호
    • /
    • pp.249-255
    • /
    • 2016
  • 노인 음성은 연령에 따른 호흡, 발성, 공명 등의 생리적 변화에 의하여 다량의 잡음이 발생된다. 따라서 노인 음성으로 음성인식 및 합성, 분석 소프트웨어등과 같은 융복합 헬스케어 기기를 동작시키고자 할 때, 성능을 저하시키는 결과를 야기한다. 그러므로 노인 음성을 분석하여 그들의 목소리로 다양한 헬스케어 기기를 잘 운영할 수 있는 위한 연구 개발이 필요하다. 따라서 본 연구는 노인 음성 잡음을 고려하여 기존의 대칭 구조 고차 미분 에너지 함수를 이용하여 노인 음성에서의 음성 구간 검출 알고리즘을 연구하였으며, 자기상관함수와 AMDF 방법과 비교하여 노인 음성에서의 음성 구간 검출에 보다 우수한 성능을 가지는 것을 확인하였다. 본 논문에서 제시하는 음성 구간 검출 알고리즘은 노인을 위한 음성 인터페이스에 적용함으로써 노인들의 스마트 기기에의 접근성을 높이고, 더 나아가 노인들을 위한 융복합 웨어러블 디바이스 성능 개선 및 다양한 개발이 가능할 것으로 전망한다.

휴폐광산의 중금속제어를 위한 융합공정 개발 (Convergence Process for the Removal of Heavy Metals in the Abandoned Mine)

  • 도현승
    • 한국융합학회논문지
    • /
    • 제7권1호
    • /
    • pp.155-160
    • /
    • 2016
  • 청양지역 폐광산의 오염원인인 중금속의 제거를 침출과 이온교환법을 활용한 융합공정을 통해 실험하였으며 중금속에 오염된 토양시료는 통계처리를 하여 분석하였다. 오염토양은 일차로 부선처리법으로 분리하였으며, 사용시약이 증가할수록 선별지수는 증가하였다. 중금속을 제거하기 위한 침출과 이온분리법에 의해 선별도는 더 향상이 되었다. 침출속도는 황산용액이 증가할수록 증가되었으며, 침출용액은 이온교환법에 의해 상당부분 제거가 되었다. 침출과 이온교환법이 결합된 연속융합공정을 개발하여 중금속 제거 실험을 하였으며, 향후 개선을 통해 중금속의 제거효과가 향상될 것이며, 이를 통해 폐광산의 오염토양에 적용 가능함을 알 수 있었다.

중등예비교사의 창의역량 강화를 위한 융합수업지도안 작성 및 수업시연의 효과 (The Effect of Convergence Lesson Plan and Teaching Demonstration for Enhancing Creative Competency of The Pre-service Teachers')

  • 김은진
    • 한국콘텐츠학회논문지
    • /
    • 제19권3호
    • /
    • pp.466-474
    • /
    • 2019
  • 본 연구는 '교육방법 및 교육공학' 수업에서 중등예비교사에게 요구되는 창의역량 강화와 학업도전 변화를 확인하는데 목적이 있다. 이를 위해 중등예비교사 94명이 한 학기 동안 융합수업지도안 작성 및 수업시연으로 진행되는 프로젝트 학습에 참여하였다. 설문지는 지은림, 주언희(2012)가 개발한 창의적 인재 역량측정도구와 배상훈 외(2015)의 학부교육 실태조사(K-NSSE)의 학업도전 사전-사후 설문을 실시하였다. 데이터 분석은 IBM SPSS 18.0 프로그램을 이용하여 대응표본 t 검정을 수행하였다. 연구결과는 다음과 같다. 창의역량에서는 '고차적 사고력', '문제해결능력', '호기심', '감수성', '과제집착력', '사회 가치추구', '협동 및 배려'가 유의미하였다. 학업도전에서는 '고차원 학습'과 '학습전략'이 유의미하였다. 이를 바탕으로 융합교육, 융합수업을 일반화하여 수업하기 위해서는 다양한 융합수업설계, 지도안 작성, 실천연구와 반복적인 융합수업의 효과를 검증하며 수정 보완 과정의 필요성에 대한 시사점을 논의하였다.

지진해일 조기탐지를 위한 한국의 지진해일 관측장비 최적 위치 제안 연구 (A Study of the Optimal Deployment of Tsunami Observation Instruments in Korea)

  • 이은주;정태화;김지창;신성원
    • 한국해양공학회지
    • /
    • 제33권6호
    • /
    • pp.607-614
    • /
    • 2019
  • It has been an issue among researchers that the tsunamis that occurred on the west coast of Japan in 1983 and 1993 damaged the coastal cities on the east coast of Korea. In order to predict and reduce the damage to the Korean Peninsula effectively, it is necessary to install offshore tsunami observation instruments as part of the system for the early detection of tsunamis. The purpose of this study is to recommend the optimal deployment of tsunami observation instruments in terms of the higher probability of tsunami detection with the minimum equipment and the maximum evacuation and warning time according to the current situation in Korea. In order to propose the optimal location of the tsunami observation equipment, this study will analyze the tsunami propagation phenomena on the east sea by considering the potential tsunami scenario on the west coast of Japan through numerical modeling using the COrnell Multi-grid COupled Tsunami (COMCOT) model. Based on the results of the numerical model, this study suggested the optimal deployment of Korea's offshore tsunami observation instruments on the northeast side of Ulleung Island.

몰입형 가상 환경 기반 음식물 섭취에 따른 신체 변화 교육 효과 분석 (The Effects of Education for Body Changes through Food Intake in Immersive Virtual Environments)

  • Shin, Kwang-Seong;Ryu, Ji Hyun;Cho, Chungyeon;Jo, Dongsik
    • 한국정보통신학회논문지
    • /
    • 제25권12호
    • /
    • pp.1964-1967
    • /
    • 2021
  • Recently, to improve the effectiveness of education to learn from textbooks, immersive 3D environments such as virtual reality(VR) has been widely used for education. In this paper, in order to intuitively present education about content scenarios on changes in the human body according to food intake, we consist an immersive virtual reality environment to express the same life-size organs. The participants in our educational system showed higher results in all items compared to the existing textbook-based education such as immersion, understanding, and quality of education program. Also it was found the importance of interactivity to increase the effectiveness of immersive class.

PSA: A Photon Search Algorithm

  • Liu, Yongli;Li, Renjie
    • Journal of Information Processing Systems
    • /
    • 제16권2호
    • /
    • pp.478-493
    • /
    • 2020
  • We designed a new meta-heuristic algorithm named Photon Search Algorithm (PSA) in this paper, which is motivated by photon properties in the field of physics. The physical knowledge involved in this paper includes three main concepts: Principle of Constancy of Light Velocity, Uncertainty Principle and Pauli Exclusion Principle. Based on these physical knowledges, we developed mathematical formulations and models of the proposed algorithm. Moreover, in order to confirm the convergence capability of the algorithm proposed, we compared it with 7 unimodal benchmark functions and 23 multimodal benchmark functions. Experimental results indicate that PSA has better global convergence and higher searching efficiency. Although the performance of the algorithm in solving the optimal solution of certain functions is slightly inferior to that of the existing heuristic algorithm, it is better than the existing algorithm in solving most functions. On balance, PSA has relatively better convergence performance than the existing metaheuristic algorithms.

COMPUTATIONAL PITFALLS OF HIGH-ORDER METHODS FOR NONLINEAR EQUATIONS

  • Sen, Syamal K.;Agarwal, Ravi P.;Khattri, Sanjay K.
    • Journal of applied mathematics & informatics
    • /
    • 제30권3_4호
    • /
    • pp.395-411
    • /
    • 2012
  • Several methods with order higher than that of Newton methods which are of order 2 have been reported in literature for solving nonlinear equations. The focus of most of these methods was to economize on/minimize the number of function evaluations per iterations. We have demonstrated here that there are several computational pit-falls, such as the violation of fixed-point theorem, that one could encounter while using these methods. Further it was also shown that the overall computational complexity could be more in these high-order methods than that in the second-order Newton method.