• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2273-2280
• /
• 2013

This article introduces the next-generation air surveillance system and investigates how to design of front-end low noise amplifier of the ground station receiver. In consideration of the international standard documentation and the performance of existing products, the study conducts the link budget on the entire system so that it can be competitive in terms of receive sensitivity or reliability. To obtain a proper low noise amplifier, standards of design are decided so that such factors as gain, gain flatness, and reflective loss can be optimal. In its design, the bias circuit appropriate for the characteristics of low power, low noise, or high gain was built, and according to the results of the simulation conducted after the optimal design, its gain was 16.24dB, noise factor was 0.36dB, input-output reflective loss was -18dB and -28dB each, and frequency stability was 1.11. According to the results measured after the design, its gain was 17dB, noise factor was 0.51dB, gain flatness was 0.23dB, and input-output reflective loss was -18.28dB and -24.50dB each, so the results gained were suitable for building the overall system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.485-491
• /
• 2012

Due to increase in production of the domestic textile industry, energy consumption in textile industry is still growing. Traditional dyeing machine has high temperature and pressure. Accordingly, it uses an indirect cooling system that utilize a heat exchanger to cool after the dyeing. However, this indirect cooling system consumes a great deal of water, takes prolonged periods of time to process and, most importantly, because of the condensing of the dye at the cooling stage requires further energy in reduction cleaning and washing process. Therefore, in this paper, we propose a direct cooling washing machine that replaces the traditional indirect cooling system to provide coolant into the dyeing machine. The newly proposed direct cooling washing machine will still use parts of the traditional dying but will be able to skip the cooling as well as the reduction cleaning and washing process, resulting in less processing time and lower energy consumption. Also, we made a prototype. The prototype was applied to dyeing machine to test the direct cooling washing machine's ability and dyeing property. Additionally, we compared indirect cooling washing machine with direct cooling washing machine about ability, material and energy saving assessment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.593-601
• /
• 2014

In this study, we investigated the methods of improving the capturing ability of acid fume by assessing the performance of slot-type external hood installed on both sides of an open surface tank for acid washing process. A field survey and the results of computational fluid dynamics revealed that capturing performance of existing hoods is very poor. To solve such problem, 'push-pull hood' that pushes from one side of an open surface tank and pulls on the other side was suggested. The initial prediction was that if a push-pull hood is used, the acid fume of an acid-washing tank surface could be moved towards the hood through the push flow. However, this study has confirmed that if the push flow velocity becomes too high, it could spread to other areas due to flooding from the hood. Therefore, if the push air supply is maintained at around 25 $m^3/min$(push 10 m/s), proper control flow is formed on the surface of a tank and acid fume that stayed at the upper part of the tank is smoothly captured toward the hood, significantly enhancing the capturing performance.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.139-175
• /
• 2017

The Assembly plenary session on December 3, 2017 passed a Product Liability Amendment bill that introduced clauses concerning consumer burden of proof and punitive damage reimbursement. More specifically, these newly approved provisions will reduce the burden of proof placed on consumers and levy triple punitive damage on suppliers. Significant increases in the number of product-liability lawsuit and the number of related insurance contracts are expected. Since military aircraft are designed for operational purpose(seeking greater combat effectiveness over greater safety) and used in high-risk environment, it is practically impossible to obtain an affordable product-liability insurance, Without having any backup plan, military aircraft manufacturers directly face all sort of liability risks under Product Liability Act, Warrant Liability Act and Non-Performance of Contract Act. The U.S. experienced similar problems when they first implemented their product-liability law in 1970s. There had been a big dispute among legal practitioner, insurance professionals and scholars concerning military aircraft manufacturer's liability. In order to settle the issue, the U.S. Supreme Court has established a new precedent of Government Contractor Defense(GCD). The U.S. government also included an indemnity clause for military aircraft manufacturers in their FMS Contract with the Korean government. Likewise, Korean military aircraft manufacturers should 1) clearly understand their current position that they cannot afford expensive product-liability insurance and the cost is not accounted in the military procurement calculation, 2) estimate potential liability risks with the ongoing overseas export expansion in mind, 3) set up appropriate risk management measures through regulatory reform and policy development.

• Archives of design research
• /
• v.13 no.4
• /
• pp.163-174
• /
• 2000

issued in the U.S is a magazine specialized in graphic design, which has a totally different style from commercial magazines such as show case. The main motive why Rudy VanderLans, the publisher, first issued this magazine in the early 1980s is his assertion that there is no design paradigm of universial concept in the aspect of viaual communication design. Also, it started from his recognition that a medium for letting a new generation's show their liberal thinking and experimental expressions. This study looks at theologies and assertions on new graphic concept, which is called the New Wave of graphic design by classifying the plans of into form and contents, and analyzes its specialty in design. Also, this study examines the overall trends of non-Grid editorial design since the modern style. By doing so, I could have a general look at the progressive traits and their futuristic directions that become to have a shorter life cycle with the advent of the 21st century's information era, high-tech media and the change of production environment by digital technology.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.64-73
• /
• 2020

This paper presented a methodology for calculating daily load curves per city by taking into account the charging/discharging location of electric vehicle. In other words, this is the daily load curve calculation algorithm by city, which takes into account the charging/discharging location of electric vehicles, so that the impact of loads generated by charging/discharging of electric vehicles on the power grid can be easily understood in certain cities. Specifically, in accordance with the PEVs share scenario, the PEVs discharge power was calculated to reflect both the characteristics of the arriving vehicle in the morning and the SMP plan after establishing a assumption that the electric vehicle arrived at work in the morning and the electric vehicle arrived at home in the afternoon for each of the charging/discharging locations, that is, work and home, of electric vehicles in the city. After calculating the daily load curve for each charging/discharging power type for the PEVs charging strategy, which takes into account both the characteristics of the vehicle arriving at home in the afternoon and the TOU fare system, it was analyzed by comparing the impact assessment on the grid by adding the existing load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.164-169
• /
• 2019

Defense R&D investment is expanding. This shows that major countries are preparing for future warfare by securing high-tech technologies and developing new concept weapons systems. In particular, it is expected to accelerate the development of the technology of the 4th Industrial Revolution in the future, and Korea needs its own ability to develop advanced weapons and medium- and long-term investment strategies to prepare for future warfare. The defense science and technology strategy will be established every five years. The strategy-dependent R&D drive has limitations in replacing the rapidly changing security environment and changes in science and technology. This study proposes an investment efficiency process to proactive incorporate information into R&D strategies with a focus on implementing policies and changing security threats, while maintaining continuity in which strategic and focused areas are linked to core technology development. The process can quickly reflect the needs of technological change, the security environment and defense policy. The process can be used to efficiently allocate defense R&D budgets and establish strategic investment directions.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.264-268
• /
• 2017

In the 21st century, information and communication technology (ICT) worldwide presents a new vision for agriculture. Time and place, as well as the high-tech industry, to overcome barriers to the fusion of the so-called "smart agriculture," are changing the agricultural landscape. Core container production in precision agriculture for mushroom cultivation, optimal temperature, humidity, irradiation, self-regulation of factors such as carbon dioxide, and environment for mushroom cultivation were adopted. Lentinula edodes (shiitake) is an edible mushroom native to East Asia, cultivated and consumed in many Asian countries. It is considered to be medicinal in certain practices of traditional medicine. We used different controlled light sources (Blue-Red-White-combined LED, blue LED, red LED, and fluorescent light) with different LED radiation intensities (1.5, 10.5, and $20.5{\mu}mol/m^2s$ for LEDs) to compare growth and development. Mushrooms were treated with light in a 12-hour-on/12-hour-off cycle, and maintained in a controlled room at $19{\sim}21^{\circ}C$, with 80~90% humidity, and an atmospheric $CO_2$ concentration of 1,000 ppm for 30 days. Growth and development differed with the LED source color and LED radiation intensity. Growth and development were the highest at $10.5{\mu}mol/m^2s$ of blue LED light. After harvesting the fruit bodies, we measured their weight and length, thickness of pileus and stipe, chromaticity, and hardness. The $10.5{\mu}mol/m^2s$ blue-LED-irradiated group showed the best harvest results with an average individual weight of 39.82 g and length of 64.03 mm, pileus thickness of 30.85 mm and pileus length of 43.22 mm, and stipe thickness of 16.96 mm with fine chromaticity and hardness. These results showed that blue LED light at $10.5{\mu}mol/m^2s$ s exerted the best effect on the growth and development of L. edodes (shiitake) mushroom in the ICT-system container-type environment.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.447-465
• /
• 2004

This paper is to analyze citizens' consciousness on urban changes, especially focusing on changes in urban environment, spatial structure, and urban planning, of large cities in S. Korea, that is, Seoul, Daejeon, Daegu, and Kwangju in the 1990s. Some significant points can be described as follows. First. The most important factor influencing on the change of urban spatial structure was the expansion of residential area inner and outside of cities promoted by the traditional construction industry, and not development of high-tech industries and their complex or location of multi-national firms which can be emphasized as major factors of new urbanization process of global cities. Secondly, citizens seem to have experienced improvement and deterioration of urban environment simultaneously, emphasizing regulatory environmental policy on the one hand, and recognize the necessity of sustainable urban development within given environmental capacity and restoration of destructed and polluted environment of cities. Thirdly, the building boom of new apartment complex was a major driving force of changing urban spatial structure, but it could neither alleviate a residential gap between the poor and the rich areas nor a relief of traffic congestion. Finally, the urban policy in general was felt somewhat improved by citizens, but not in sectoral details.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.3
• /
• pp.576-606
• /
• 2017

It is more salient in the high-tech industry to cooperate even among competitors in order to promptly respond to the changes in product architecture. In this sense, 'co-opetition,' which is the combination word between 'cooperation' and 'competition,' is the new business term in the strategic management and represents the two concepts "simultaneously co-exist." From this view, this study set up the research purposes as follows: 1) investigating the corporate managerial and technological behavioral characteristics in the co-opetition of the global display industry. 2) verifying the emerging factors during the co-opetition behavior hereafter. 3) suggesting the strategic direction focusing on the co-opetition behavioral characteristics. To this end, this study used co-word network analysis to understand the structure in context level of the co-opetition. In order to understand topics on each network, we clustered the keywords by community detection algorithm based on modularity and labeled the cluster name. The results show that there were increasing patterns of competition rather than cooperation. Especially, the litigations for mutual control against Korean firms much more severely occurred and increased as time passed by. Investigating these network structure in technological evolution perspective, there were already active cooperation and competition among firms in the early 2000s surrounding the issues of OLED-related technology developments. From the middle of the 2000s, firm behaviors have focused on the acceleration of the existing technologies and the development of futuristic display. In other words, there has been competition to take leadership of the innovation in the level of final products such as the TV and smartphone by applying the display panel products. This study will provide not only better understanding on the context of the display industry, but also the analytical framework for the direction of the predictable innovation through analyzing the managerial and technological factors. Also, the methods can support CTOs and practitioners in the technology planning who should consider those factors in the process of decision making related to the strategic technology management and product development.