• 한국동물학회지
• /
• 제36권4호
• /
• pp.535-544
• /
• 1993

Sinca early 1930' Colitis taenia striate were introduced to the Donsgjin in Chollabukdo, where it hybridized with an endemic subspecies C. tiutheri. Protein electrophoresis revealed high levels of hybridization with intensive backcrossing occupied approximately 20 kilometers of the river. This is roughly one-half of tech historic range of the endemic species. The average frequency of introduced alleles of three diagnostic loci ranged 0.03-0.46 among 11 sites in tech svrnpatric area. Clinal patterns in allele frequencies suggest C. tiutheri were introduced in an upper reaches of the Dongjin and downstream dispersal of the introduced alleles followed. There is little linkasedisequilibrium between the diagnostic loci, suggesting the nuclear genomes of tech two subspecies are randomly associated. The evidence presented here and previously supports recognition of C. t. striata and C. t. lutheri as the typical subspecies.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.183-193
• /
• 1992

Compared with NR and HNBR compounds, the blend properties of NR/HNBR were studied. The heat, oil and ozone resistance of NR compounds were improved by blending HNBR, and these effects were more clearly revealed with elevating temperatures. For the overall stabilities of the compounds, it was resonable to use the carbon black under the 60phr. In the EV systems, high-saturated NR/HNBR and HNBR compounds showed similar total crosslink density in comparison with NR compounds. Interaction parameters calculated by stress-strain method showed widely varied value.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.36-40
• /
• 2016

This paper is about the analysis on the vibration characteristic of tooling units on the precision automatic lathe. The vibration characteristic of the machine tool is emphasized in accordance with the high precision of the various industries Including the various semiconductor devices and components sector. In this paper, the vibration analysis was performed in designed tooling units of precision automatic lathe. Through the analysis, it is calculated that the frequency of distribution in certain areas by review the resonant frequency and the amount of deformation. And designed model was verified to be a stable structure.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2016

본 논문에서는 기계식 스위치를 이용한 1.5 GHz 대역 고출력 Cavity 기반 튜너블 필터를 설계하고 제작하였다. 불요파를 제거하기 위해 저역통과필터를 삽입하고, 출력을 추출하기 위해 Coupler를 내장하였으며, 고출력에 적합한 기계식 스위치를 사용하여 튜너블 필터의 시스템을 구성하였다. 저역통과필터는 4~12.75 GHz까지 40 dB 이상의 감쇄 특성을 얻었고, Coupler는 40 dB의 Coupling Value와 55 dB 이상의 Coupling Isolation을 얻었다. 제작된 기계식 스위치를 사용한 튜너블 필터 시스템은 1,495.9~1,510.9 MHz Bypass Mode에서 0.88 dB, 1,495.9~1,500.9 MHz Fil Mode에서 3.29 dB의 삽입손실 특성 및 중심주파수 1,498.4 MHz에서 132 W의 출력전력과 10 ms 이하의 스위칭 절환속도를 얻었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1195-1200
• /
• 2008

This study have goal with conceptual design for Offshore Structures of high pressure control valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the Offshore Structures high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the glycerin($C_3H_8O_3$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated until increasing 1bar to 10bar. CFD analysis used STAR-CCM+ which is commercial code and Governing equations were calculated by moving mesh which is rotated 90 degrees when ball valve operated opening and closing in 1 degree interval. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. Relation with flow and flow coefficient can not be proportional according to inlet pressure when compare with mass flow rate. Because flow coefficient have influence in flow and pressure difference. Namely, flow can be change even if it has same Cv value. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.529-534
• /
• 2016

칼슘실리케이트계 무기단열소재는 주원료로 시멘트를 90%를 사용하는 다공성 무기단열소재이다. 기존 무기단열소재와 달리 고온의 수화반응 처리가 없기 때문에 가격이 저렴하며, 불연소재의 원료를 사용하여 화제의 위험성도 적다. 칼슘실리케이트 단열소재는 $0.13g/cm^3$의 밀도와 0.050W/mK이하의 우수한 열전도도를 갖는 단열소재이다. 칼슘실리케이트 단열소재는 경량화 될수록 내부 기포를 다량 함유해야 하며 기포를 다량 함유함에 따라 단열성 또한 우수해진다. 본 연구에서는 다량의 기포를 함유하며 일정강도발현을 목표로, 칼슘실리케이트계 무기단열소재의 주성분인 시멘트가 수화반응에 따라 초기 및 장기강도발현하는 특성을 이용하여 칼슘실리케이트계 무기단열소재에 적용하여 물리적 특성을 알아보고자 하였다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.

• Steel and Composite Structures
• /
• 제14권4호
• /
• pp.313-333
• /
• 2013

The web-encased steel-concrete composite (WESCC) beam is a new developed steel-concrete composite beam. Experiments of six simply supported WESCC beam specimens were conducted. The effects of the shear-span ratio and steel section type were all investigated on the static behaviors such as failure modes, failure mechanism and bearing capacity. The experimental results denoted that all specimens failed in bending mode and the degree of combination between the bottom armor plate of steel shape and concrete were very well without any evident slippage, which demonstrated that the function of bottom armor plate and web were fully exerted in the WESCC beams. It could be concluded the WESCC beams have high stiffness, high load carrying capacity and advanced ductility. The design methods are proposed which mainly consist the bearing capacity calculation of bending and flexural rigidity. The calculation results of the bearing capacity and deflection which take the shear deflection into account are in agreement with the experimental results. The design methods are useful for design and application of the innovative composite beams.

• 폴리머
• /
• 제39권3호
• /
• pp.493-498
• /
• 2015

피부재생을 위한 생체재료는 염증반응이 최소화되는 안정한 소재로 빠른 피부재생을 돕기 위해 우수한 생체활성과 생체친화성을 가져야 하며, 세포의 부착과 성장을 돕는 미세구조와 다공성이 있어야 한다. 본 연구에서는 새로운 콜라겐 원으로서의 축산부산물인 오리발을 사용하여 콜라겐을 추출하였고 이를 탈미네랄화된 골분demineralized bone powder, DBP), 돼지 소장점막하 조직(small intestinal submucosa, SIS)과 비교하기 위해 스펀지 형태로 제작하였다. 지지체의 물리, 화학적 특징은 SEM, FTIR을 통해 확인하였다. 세포를 파종하여 MTT를 통해 세포의 부착 및 증식률을 측정하였고, 전염증성 사이토카인의 발현도를 보기 위해 RT-PCR을 실시하였다. 또한 항산화 활성능력을 보기 위해 1,1-diphenyl-2-picrylhydrazyl(DPPH)를 측정하였다. 그 결과 오리발 콜라겐 지지체가 물리적 특성이 우수하고 생체적합성이며, 상처 치유제로서의 가능성을 보여주었다.

• 미래기술융합논문지
• /
• 제2권4호
• /
• pp.13-19
• /
• 2023

파리기후변화협약(UNFCCC, 2015) 체결에 따라 선진국뿐만 아니라 개발도상국을 포함하는 포괄적 참여를 통해 전 세계가 온실가스 감축 활동을 확대하고 있다. 세계 주요국은 탄소배출권 시장을 통한 탄소배출 총량규제의 효과에 많은 기대를 걸고 있다. 그러나 탄소배출권을 얻기 위해서는 정량적인 탄소저감량 데이터를 바탕으로 제3자 검증이 필요하다. 이에 본 논문에서는 탄소배출권용 AIoT 고효율 가로등을 개발하여 등기구의 광효율을 측정하는 성능분석 연구를 진행했다. 탄소배출권을 얻기 위해 고효율 LED PKG를 사용하며 고전압용 PFC를 자체 개발하고 통신이 가능한 고효율의 등기구를 개발했다. 통신을 위해 등기구와 Gateway간 2.4GHz LoRa 방식을 채택했다. 한국 도로공사 표준 가로등 Type A, B, C 시뮬레이션을 통하여 렌즈 설계를 진행했다. 가로등의 성능은 공인 성적기관의 광효율 측정을 통하여 기존 타제품 대비 고효율의 성능을 검증하였으며, 이를 통한 전기에너지 절감으로 탄소배출권을 획득할 것으로 기대된다.