• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.9-18
• /
• 2017

Numerical simulation is carried out for flow characteristics in a plenum fan and the influence of the diameter ratio of the rotating vaneless diffuser on the performance of plenum fan is analyzed. The diameter ratio of the rotating vaneless diffuser employed is from 1.03 to 1.3. The research results show that the rotating vaneless diffuser is able to enhance the performance of plenum fan. It is found that there is significant improvement in static pressure and efficiency at the diameter ratio of 1.05 at high flow coefficients, while the optimal diameter ratio is 1.2 at rated and low flow coefficient.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.275-277
• /
• 2001

This paper presents a fault location algorithm using current distribution factors for distribution feeder systems. When a fault occurs in distribution system, an accurate fault distance is important for fast fault restoration. The proposed algorithm achieves a high accuracy using negative sequence circuit with various fault conditions.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.121-123
• /
• 2001

This paper presents a fault location algorithm using iterative method at unbalance condition for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the phase components and admittance load model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.150-154
• /
• 2005

본 논문에서는 LabVIEW program을 사용하여 크기가 다른 파이렉스 글라스 방전관의 오존 농도를 연속적으로 측정하여 특성을 분석하였다. 또한 Flux-2D program을 사용하여 파이렉스 방전관의 전계를 분석하였다. 실험 결과에 따르면 1[$\ell$/min]에서 가장 오존 농도가 높았으며, 파이렉스 글라스 방전관 I 에서는 약 62[g/$m^3$]. 파이렉스 글라스 방전관II 에서는 약 48[g/$m^3$]으로 나타났다. 또한 고압 펄스 전원에 따른 오존농도 변화를 3D분석을 통해 확인 할 수 있었다. 확인된 분석을 통해 오존농도를 요구하는 만큼 생성한다면, 에너지 손실을 감소시키고 전극 수병을 최대화 할 수 있다.

• Management & Information Systems Review
• /
• v.21
• /
• pp.239-269
• /
• 2007

The purpose of this thesis is to analyze empirically the relationship between market structure, measured by Herfindahl-Hershmann Index(HHI), and financial factors, and innovation in Korean industry panel datasets for 2000-2006. Results show that debt ratio and scale of the firm has a consistent positive effect on the investment in research and development. As more scale of the firm is getting bigger, the investment in R&D decrease. Also, as more debt ratio of firm rise, the investment for innovation increase. Concentration ratio, the HHI and the classification factor of High-tech industry and Low-tech industry has a consistent positive effect on the innovation. Factors affecting the investment in research and development include market structure and characteristics of industry as well as the internal affairs of the firm.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1379-1381
• /
• 1994

In order to investigate the effects of crystal structure in electrical breakdown of polyethylene film. Low molecular materials in polyethylene are removed by the method as follow. Polyethylene was dissolved in xylene and filtered through a glass fiber filter. And then, a polyethylene thin films of thickness $0.5 - 0.9{\mu}m$ are prepared with heat treatment from solution casting. To evaluate the performance of PE film, Electrical breakdown of PE film are measured on M( Al) - I (PE)-M(Al) system.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.182-184
• /
• 2005

The human beings have Increased concern about Energy saving and alternative energy. The power demand has increased the growth of industry and the improvement of life We have to explore alternate energy sources and utilize effectively domestic resources. The lighting equipments developed Energy saving by using an electric ballast. The load installation should be promoted to rational power management, according to the network, intelligent, and high-function. Therefore, this paper has studied the method of energy saving and consulting.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.49-51
• /
• 1999

This paper presents an efficient 2D finite element analysis(FEA) for brushless DC motor (BLDCM) taking into account the eddy current and lamination effect of stator. In BLDCM, the dynamic characteristic analysis considering the eddy current and driving circuit is applied for the accurate prediction of motor performance in high speed because the eddy current loss is proportional of square of the driving frequency. According to the variation of lamination number, the characteristics of electro magnetic force, torque, and eddy current loss are analyzed. From the results, it is known that the effect of the lamination of stator on the eddy current loss is verified.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.313-325
• /
• 2016

The paper provides a comprehensive procedure for the mechanical and magnetic design of Langevin transducer based on giant magnetostrictive material. The the transducer is designed to work at its second mode of vibration, having high mechanical quality factor and low damping coefficient. The design procedure is based on an analytical model and it is verified by finite-element analysis. Experimental tests based on impedance response analysis in first and second modes are carried out on the prototype. Results confirm the appropriate design of this transducer, demonstrating the highest mechanical quality factor between the resonant transducers in the literature.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.469-483
• /
• 2014

In an indentation approach, the smooth rigid spherical ball penetrated into a deformable flat is considered for the study based on contact mechanics approach. The elastic-plastic frictionless spherical indentation analysis has been under taken in the finite element analysis using "ABAQUS" and experimental study. The spherical indentation has been studied for the materials like steel, aluminium, copper and brass with an identical spherical indenter for diverse indentation depths. The springback analysis is executed for studying the actual indentation depth after the indenter is unloaded. In the springback simulation, the material recovers its elastic deformation after the indenter is unloaded. The residual diameter and depth of an indentation for various materials are measured and compared with simulation results. It shows a good agreement between the simulation and an experimental studies.