• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.340-344
• /
• 1972

Isomeric ratios were measured for the capture of thermal neutron by $^{79}$ Br, $^{80}$ Se, $^{103}$ Rh, $^{115}$ In and $^{133}$ Cs as well as those of epi-cadmium neutron by $^{79}$ Br, $^{80}$ Se and $^{l33}$Cs. The measurements were performed by analysing decay curves obtained by ${\gamma}$-ray spectrometry after irradiation. The counting efficiency curve was determined by using the calibrated standard sources with overall uncertainties of about 1%. Isomeric ratios, given in $\sigma$ high spin/($\sigma$ high spin + $\sigma$ low spin), of $^{80, 80m}$Br, $^{81,81m}$Se, $^{014, 104m}$Rh, $^{116,116m}$In and $^{134, 134m}$Cs produced by thermal neutron activation were found to be 0.21$\pm$0.01, 0.14$\pm$0.02, 0.12$\pm$0.02, 0.69$\pm$0.07 and 0.058$\pm$0.004, respectively, Those values of $^{80, 80m}$Br, $^{81,81m}$Se, and $^{134, 134m}$Cs Produced by epi-cadmium neutron were found to be 0.19$\pm$0.02, 0.29$\pm$0.02 and 0.074$\pm$0.011, respectively. The experimental values obtained were compared with the theoretical values deduced from the statistical model. There were the general agreements between the theory and the experiment.t.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.894-900
• /
• 2012

The purpose of this research is to investigate the dynamic roll-damping characteristics of a spin-stabilized projectile in wind-tunnel testing. In the present work, the high-speed wind-tunnel tests for the roll-damping measurements were conducted on a finned spin-stabilized projectile model in the Agency for Defense Development's Trisonic Wind Tunnel at spin rates about 8,000 rpm. The test Mach numbers ranged from 0.6 to 0.9, and the angles of attack ranged from 0 to +15 deg. The evaluation of the bearing friction parameter was also conducted to eliminate the tare damping moment from the aerodynamic damping moment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.29-32
• /
• 2005

Poly (methyl methacrylate) (PMMA) is one of the promising representive of polymer gate dielectric for its high resistivity and sutible dielectric constant. PMMA (Mw=96700) films were prepared on p-Si by spin coating method. PMMA were coated compactively and flatly as observeed by AFM. MIS(Al/PMMA/p-Si) structure was made and capacitance-voltage (C-V) and current-voltage (I-V) measurements were done with PMMA films for different thermal treatment temperature. PMMA films were showed proper dielectric constant and breakdown voltage. Above the glass transition temperature PMMA films degraded. C-V measured at various frequencies, dielectric constant increased a little. The absence of hysteresis in the C-V characteristics, which eliminate the possibility of mobile charges in the PMMA films. The observed thermal stability, smooth surfaces, dielectric constant, I-V behavior implies PMMA formed by spin coating can be used as an efficient gate dielectric layer in OTFTs.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.30-40
• /
• 2010

The hard disk is one of the most frequently used storage in IPTV sep-top box. It has large storage capacity and provides fast I/O speed compared to its price whereas it causes high power consumption due to mechanical characteristics of spindle motor. In order to play streaming data in the set-top box, spindle motor of hard disk keeps active mode and it causes high power consumption. In this paper, We propose an offset-buffering and multi-mode spin-down method to reduce power consumption for streaming data playback. The offset-buffering inspects the user's viewing pattern and performs buffering based on the analysis of viewing pattern. So, it can maintain the status of spindle motor as idle mode for long time. Besides, it can reduce power consumption by spinning down according to offset-buffer size. The experimental result shows that proposed offset-buffering and multi mode spin-down method is about 28.3% and 12.5% lower than the full-Buffering method in terms of the power consumption and spin-down frequency, respectively.

• Journal of Digital Convergence
• /
• v.7 no.1
• /
• pp.157-164
• /
• 2009

This research focuses on entrepreneurial orientation(EO) of technology spin-offs as they are expected to reduce the gap between their technology and the market. Entrepreneurial orientation is an organizational activity or process that redistributes or combines resources in an innovative way and takes risk to create new values. It helps improve the level of organizational innovation to deal with uncertainty. An empirical study was performed to analyze the EO of spin-offs established by members of university faculties and research institutes in Korea. Antecedent variables to EO are hypothesized to include public policy for university faculty members and researchers at research institutes, the relationship with incubating organizations, and the level of social networking with other firms. The EO and technological performance relationships are also hypothesized. Data from a total of 121 spin-off organizations were collected and a series of multiple regressions were performed. The performance variable included both technological performance, such as the number of newly marketed products and new technology and subjective performance, such as the level of satisfaction with sales amount and profitability. Several important conclusions were drawn from this study. First, while government policy is not related to EO, the policy of a university or a research institute has a significant effect on the level of innovativeness. Second, a high percentage of human resources applied at the incubating organization results in a negative effect on risk taking. The level of cooperation with the incubating organization too is not related to Entrepreneurial Orientation. Third, the intensity of cooperative networking with other firms has a significant effect on risk-taking. Network relationship with government related organizations is not related to Entrepreneurial Orientation. This study analyzes the importance and role of policy of the university and research institute and networking with other firms to improve EO. It also suggests that a high composition of human resources at the incubating organization has a negative relationship with EO.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.173-177
• /
• 2013

Cantilever-detected high-frequency electron spin resonance (ESR) is a powerful method of sub-terahertz and terahertz ESR spectroscopy for a tiny magnetic sample at low temperature. In this technique, a small magnetization change associated with ESR transition is detected as deflection of a sample-mounted cantilever. So far, we have succeeded in ESR detection at 370 GHz using a commercial piezoresistive microcantilever. The spin sensitivity was estimated to ${\sim}10^{12}$ spins/gauss. In order to further increase the sensitivity, we adopt a fiber-optic-based detection system using a Fabry-Perot interferometer in place of piezoresistive system. Fabry-Perot cavity is formed between an optical-fiber end and microcantilever surface, and a change in the interference signal, corresponding to the cantilever deflection, is sensitively detected. This system is suitable for low-temperature and high-magnetic-field experiments because of its compact setup and less heat dissipation. In this study, performance of Fabry-Perot interferometer is evaluated, and its application to cantilever-detected ESR measurement is described.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.230-237
• /
• 1994

Spin-filters are used as cell separation devices for achieving high cell density and high productivity in animal cell culture. We have proposed a model for the cell growth in a spin-filter perfusion culture and examined the effects on cell growth by several parameters including ammonia inhibition, specific growth rate, specific feeding rate, and cell retention. Results from computer simulation and sensitivity analysis indicate that the cell retention affects the cell growth mostly while there is a significant inhibition on cell growth by the ammonia accumulated during the culture. The specific feeding rate has minimal effects on cell growth, which is consistant with the fact that the cell growth with a step feeding is quite similar to that with a continuous feeding.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2008

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that strength of mechanical press-Joining (MPJ) for spin drum is improved to attain that target. MPJ of spin drum is composed of seaming and caulking process. Because Seaming process of MPJ has various design factors such as thickness, bending radius, seaming width, caulking press width and the dynamic factor such as multistage plastic working, elastic recovery, residual stress, the optimum conditions can't be easily determined. Using a design of experiment (DOE) based on the FEM (Finite Element Method), which has several advantages such as less computing, high accuracy performance and usefulness, this study was performed investigating the interaction effect between the various design factor as well as the main effect of the each design factor during drum MPJ and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.1
• /
• pp.73-77
• /
• 1999

Purpose : The purpose of the study was to evaluate the sensitivity and specificity of proton-weighted fast spin-echo MR imaging in diagnosing the meniscal tear of knee as an reasonable substitute for conventional spin-echo imaging. Materials and Methods : 102 consecutive patients, proved by surgery, proved by surgery, were participated in this study. All of them were suspected internal derangement of knee, examined by fast spin-echo MR imaging including sagittal and coronal images on a 1.5T MR imager and underwent arthroscopic or open surgery of knee joint within 2 months. These images were reviewed retrospectively by three radiologists. The sensitivity and specificity of meniscal tear were calculated. Results : The sensitivity and specificity of meniscal tear using proton-weighted fast spin-echo MR imaging were 94%, 93% inmedialmeniscus and 92%, 88% in lateral meniscus. Conclusion : The sensitivity and specificity of meniscal tear using proton weighted fast-spin echo MR images were as high as those using conventional spin-echo images. The proton-weighted fast-spin echo MR imaging can be an alternative to conventional spin-echo MR imaging in diagnosing meniscal tear of the knee.