• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.186-193
• /
• 2015

본 연구에서는 차세대 고속열차의 신뢰성 성장률 분석에 대한 연구를 수행하였다. 차세대 고속열차의 신뢰성 평가를 효과적으로 수행하기 위해서 6개의 서브시스템으로 분류를 하였으며, 이에 대한 기능블록선도와 신뢰성블록선도를 도출하였다. 또한 안정화 시험 중에 수행된 시험결과를 바탕으로 고장정보분석을 수행하였다. 그리고 Duane 모델에 기반한 신뢰성 성장률 분석을 차세대 고속열차의 실험 결과에 적용하였다. 본 연구를 통해서 지속적인 차량의 유지 보수 활동이 신뢰성 성장에 영향을 미치고 있음을 확인하였다.

• International Journal of Railway
• /
• 제5권3호
• /
• pp.129-134
• /
• 2012

Contact fatigue damages on the rail surface, such as head checks and squats are a growing problem. The fatigue cracks forming on the contact surface grow according to load and lubricating conditions and may end up breaking the rail. Rail fracture can be avoided by preventing the cracks from reaching the critical length. Therefore, the crack growth rate needs to be estimated precisely according to the conditions of the track and load to develop a maintenance plan against rail damages. Therefore, it is important to understand the mechanism of cracks initiation and growth on a rail due to repetitive rolling contact. In this study, we have investigated the crack growth behavior on the rail surface by using the twin-disc tests and the finite element analysis.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.54-64
• /
• 1995

The effects of swirl on early flame development and late combustion characteristic were investigated using a high speed single-shot visualized 51 engine. LDV measurements were performed to get better understanding of the flow field in this combustion chamber. Spark plugs were located at half radius (R/2) and central location of bore. High speed schlieren photographs at 20,000 frames/sec were taken to visualize the detailed formation and development of the flame kernel with cylinder pressure measurements. This study showed that high swirl gave favorable effects on combustion-related performances in terms of the maximum cylinder pressure and flame growth rate regardless of spark position. However, at R/2 ignition the low swirl shown desirable effects at low engine speed gave worse performances as engine speed increased than without swirl. There were distinct signs of slow-down in flame growth during the period when the flame front expanded from 2.5mm in radius until it reached 5.0mm apparently due to the presence of ground electrode. There seemed to be heat transfer effect on the flame expansion speed which was evidenced in high swirl case by the slowdown of the late flame front presumably caused by relatively large heat loss from burned gas to wall compared with low- or no-swirl cases.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.165-170
• /
• 2009

The Korean high-speed rail network has been made a remarkable growth recording the world's 4th rank passenger transportation scale during last 5 years after opening the revenue service of Kyoung-bu high-speed line in 2004. However, in spite of it's outstanding growth, Korean Rail technology should meet a demand of intensive technology development in order to prepare a severe competition with an advance parties of worldwide high-speed rail technology. In this paper, the characteristics and new trend of world's rail industry was reviewed based on the most recent statistics and papers of worldwide rail network from UIC and WCR32008. In conclusion, new R&D strategy with choice an concentration for the Korean high-speed rail industry was suggested based on an analysis on the trend of evolution of the state of the art technologies in worldwide high-speed rail system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1228-1233
• /
• 2006

Since 1996, the G7 R&D and High-Speed Rail development project have been accomplished and it will be completed in 2007. During that time, we have achieved the origin design technique based on technique development experience. However, in order to magnify and to promote the growth of the origin design technique for railway industry to be a growth motive industry in future from intensive speed elevation and new technique competition of advanced nations, we need to prepare the next generation high-speed rail technique and to sustain expansion of the technique with getting hold of new technique tendency of the world. Therefore, this paper make research into necessity of the next generation high-speed rail development project, making an analysis of foreign countries cases and forward plan.

• 한국세라믹학회지
• /
• 제22권5호
• /
• pp.43-46
• /
• 1985

Constitutional supercooling due to concentration gradient at solid-liquid interface in the melt can be avioded by increasing rotational speed for growing $LiNbO_3$ single crystals from the stoichiometric melt. Growth conditions for high quality crystals were determined by rotational speed by which other growth parameters were adjusted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 2001

The high speed machining which cam improve the production and quality has been remarkable in die/mold industry with the growth of parts and materials industries. The speed of machine tool increases, but on the other hand, the response of sensors I not being improved. Therefore, the condition monitoring techniques for the machine too, tool and workpiece in high speed machining are incomplete. In this study, characteristics of the tool edge roughness were verified from the high frequency components of cutting force signals acquired by the high speed dynamometer. Also, the experimental evaluation technique for the machinability and condition monitoring in high speed machining was established by analyzing the cutting force, acceleration and surface roughness.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.13-19
• /
• 2003

The high speed machining technology has been improved remarkably in die/mold industry with the growth of parts and materials industries. Though the spindle speed of machine tool increases, the condition monitoring techniques of the machine tool, tool and workpiece in high speed machining ate incomplete. In tins study, efficient sensing technology in high speed machining is suggested by observing the characteristics of cutting force, gap sensor and accelerometer signal also, machinability of high-speed machining is experimentally evaluated sensing technique to monitor the machine tool and machining conditions was performed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1909-1914
• /
• 2003

Bubble growth on microheater has been experimentally investigated in this study. The experiment was performed using platinum micro heaters having dimensions of $100{\times}10{\times}0.2{\mu}m^3$ with constant heat flux. A high speed video camera was used to observe bubble growth at 250 frames per second. Microheater temperature was measured at the rate of 300Hz with a data acquisition system. When heater temperature was $139^{\circ}C$ a bubble was nucleated in the liquid FC-72. The temperature profiles and the high speed camera images were combined to explain heat transfer and bubble growth on microheater.

• KSBB Journal
• /
• 제17권3호
• /
• pp.307-310
• /
• 2002

교반속도가 증가함에 따라, 비성장속도가 증가하여 P. putida가 호기적 조건에서 더 잘 성장함을 알 수 있었다. pH를 조절하지 않았을 경우와 달리 암모니아 수용액을 이용하여 pH를 5.0, 7.0으로 조절했을 때, 포도당의 소모량이 증가 할 뿐 아니라 비성장 속도가 증가하였다($\mu$=0.27 --> 0.42). 포도당만을 공급할 것이 아니라 yeast extract와 같은 유기 질소원 다른 기질도 같이 공급함으로써, 보다 많은 균체량을 얻을 수 있었다.