• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1932-1938
• /
• 2003

We have applied spectroscopic ellipsometry to investigate $high-{\kappa}$ dielectric thin films and correlate their optical properties with fabrication processes, in particular, with high temperature annealing. The use of high-k dielectrics such as $HfO_{2}$, $Ta_{2}O_{5}$, $TiO_{2}$, and $ZrO_{2}$ as the replacement for $SiO_{2}$ as the gate dielectric in CMOS devices has received much attention recently due to its high dielectric constant. From the characteristics found in the pseudo-dielectric functions or the Tauc-Lorentz dispersions, the optical properties such as optical band gap, polycrystallization, and optical density will be discussed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권2호
• /
• pp.103-110
• /
• 2001

Gate oxide scaling for sub-l00nm CMOS devices has been studied. Issues on the gate oxide scaling are reviewed, which are boron penetration, reliability, and direct tunneling leakage currents. Reliability of Sub-2.0nm oxides and the device performance degradation due to boron penetration are investigated. Especially, the effect of gate leakage currents on the transistor characteristics is studied. As a result, it is proposed that thinner oxides than previous expectations may be usable as scaling proceeds. Based on the gate oxide thickness optimization process we have established, high performance CMOS transistors of $L_{gate}=70nm$ and $T_{ox}=1.4nm$ were fabricated, which showed excellent current drives of $860\mu\textrm{A}/\mu\textrm{m}$ (NMOS) and $350\mu\textrm{A}/\mu\textrm{m}$ (PMOS) at $I_{off}=10\mu\textrm{A}/\mu\textrm{m}$ and $V_dd=1.2V$, and CV/I of 1.60ps (NMOS) and 3.32ps(PMOS).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.428-431
• /
• 2003

In this paper, the stress induced leakage currents of thin silicon oxides is investigated in the ULSI implementation with nano structure transistors. The stress and transient currents associated with the on and off time of applied voltage were used to measure the distribution of high voltage stress induced traps in thin silicon oxide films. The stress and transient currents were due to the charging and discharging of traps generated by high stress voltage in the silicon oxides. The transient current was caused by the tunnel charging and discharging of the stress generated traps nearby two interfaces. The stress induced leakage current will affect data retention in electrically erasable programmable read only memories. The oxide current for the thickness dependence of stress current, transient current, and stress induced leakage currents has been measured in oxides with thicknesses between $113.4{\AA}$ and $814{\AA}$, which have the gate area 10-3cm2. The stress induced leakage currents will affect data retention and the stress current, transient current is used to estimate to fundamental limitations on oxide thicknesses.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권1호
• /
• pp.13-20
• /
• 2003

Both MgO and $Sc_2O_3$ are shown to provide low interface state densities (in the $10^{11}{\;}eV^{-1}{\;}cm{\;}^{-2}$ range)on n-and p-GaN, making them useful for gate dielectrics for metal-oxide semiconductor(MOS) devices and also as surface passivation layers to mitigate current collapse in GaN/AlGaN high electron mobility transistors(HEMTs).Clear evidence of inversion has been demonstrated in gate-controlled MOS p-GaN diodes using both types of oxide. Charge pumping measurements on diodes undergoing a high temperature implant activation anneal show a total surface state density of $~3{\;}{\times}{\;}10^{12}{\;}cm^{-2}$. On HEMT structures, both oxides provide effective passivation of surface states and these devices show improved output power. The MgO/GaN structures are also found to be quite radiation-resistant, making them attractive for satellite and terrestrial communication systems requiring a high tolerance to high energy(40MeV) protons.

• 한국재료학회지
• /
• 제1권3호
• /
• pp.125-131
• /
• 1991

pMOS소자의 $p^{+}$게이트 전극으로 다결정실리콘과 비정질실리콘을 사용하여 고온의 열처리 공정에 따른 붕소이온의 침투현상을 high frequency C-V plot, Constant Current Stress Test(CCST), Secondary Ion Mass Spectroscopy(SIMS) 및 Transmission Electron Microscopy(TEM)를 이용하여 비교하였다. C-V plot분석 결과 비정질실리콘 게이트가 다결정실리콘 게이트에 비해 flatband전압의 변화가 작게 나타났으며, 게이트 산화막의 절연파괴 전하밀도에서는 60~80% 정도 향상된 값을 나타내었다. 비정질실리콘 게이트는 증착시 비정질로 형성되는 구조로 인한 얇은 이온주입 깊이와 열처리 공정시 다결정실리콘에 비교하여 크게 성장하는 입자 크기 때문에 붕소이온의 침투 경로가 되는 grain boundary를 감소시켜 붕소이온 확산을 억제한 것으로 생각된다. Electron trapping rate와 flatband 전압 변화와의 관계에 대하여 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.371-371
• /
• 2010

In this paper, the stress induced leakage currents of thin silicon oxides is investigated in the MEMS implementation with nano structure. The stress and transient currents associated with the on and off time of applied voltage were used to measure the distribution of high voltage stress induced traps in thin silicon oxide films. The oxide current for the thickness dependence of stress current, transient current, and stress induced leakage currents has been measured in oxides with thicknesses between $41{\AA}$, which have the gate area $10^{-3}cm^2$. The stress current, transient current is used to estimate to fundamental limitations on oxide thicknesses.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.25-29
• /
• 2008

Reliability and performance in metal gate/high-k device with multiple gate dielectrics were investigated. MOSFETs with a thin $HfSiO_x$ layer on a thermal Si02 dielectric as gate dielectrics exhibit excellent mobility and low interface trap density. However, the distribution of threshold voltages of $HfSiO_x/SiO_2$ stack devices were wider than those of $SiO_2$ and $HfSiO_x$ single layer devices due to the penetration of Hf and/or intermixing of $HfSiO_x$ with underlying $SiO_2$. The results of TZDB and SILC characteristics suggested that a certain portion of $HfSiO_x$ layer reacted with the underlying thick $SiO_2$ layer, which in turn affected the reliability characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.533-536
• /
• 2006

VIATRON TECHNOLOGIES has developed Field-Enhanced Rapid Thermal Processor (FERTP) system that enables LTPS LCD and AMOLED manufacturers to produce poly-Si films at low cost, high throughput, and high yield. The FE-RTP allows the diverse process options including crystallization, thermal oxidation of gate oxides and fast pre-compactions. The process and equipment compatibility with a-Si TFT lines is able to provide a viable solution to produce poly-Si TFTs using a-Si TFT lines.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.203-212
• /
• 2010

In this paper, we present an analytical model for the first eigen energy level ($E_0$) of the carriers in the inversion layer in present generation MOSFETs, having ultrathin gate oxides and high substrate doping concentrations. Commonly used approaches to evaluate $E_0$ make either or both of the following two assumptions: one is that the barrier height at the oxide-semiconductor interface is infinite (with the consequence that the wave function at this interface is forced to zero), while the other is the triangular potential well approximation within the semiconductor (resulting in a constant electric field throughout the semiconductor, equal to the surface electric field). Obviously, both these assumptions are wrong, however, in order to correctly account for these two effects, one needs to solve Schrodinger and Poisson equations simultaneously, with the approach turning numerical and computationally intensive. In this work, we have derived a closed-form analytical expression for $E_0$, with due considerations for both the assumptions mentioned above. In order to account for the finite barrier height at the oxide-semiconductor interface, we have used the asymptotic approximations of the Airy function integrals to find the wave functions at the oxide and the semiconductor. Then, by applying the boundary condition at the oxide-semiconductor interface, we developed the model for $E_0$. With regard to the second assumption, we proposed the inclusion of a fitting parameter in the wellknown effective electric field model. The results matched very well with those obtained from Li's model. Another unique contribution of this work is to explicitly account for the finite oxide-semiconductor barrier height, which none of the reported works considered.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.23-31
• /
• 2008

중수소 처리된 3 nm 두께의 게이트 산화막을 갖는 MOSFET를 제조하여 정전압 스트레스 동안의 게이트 산화막의 열화를 조사하였다. 중수소 처리는 열처리와 이온 주입법을 사용하여 각각 이루어졌다. 열처리 공정을 통해서는 게이트 산화막내 중수소의 농도를 조절하기가 힘들었다. 게이트 산화막내에 존재하는 과잉 중수소 결합은 열화를 가속시키기 때문에, 열처리 공정을 행한 소자에서 신뢰성이 표준공정에 의한 소자에 비해 저하되고 있음을 확인하였다. 그러나 중수소 이온 주입 방법을 통해서는 소자의 신뢰성이 개선됨을 확인하였다. 스트레스에 의한 게이트 누설 전류 변화 및 구동 특성 변화는 게이트 산화막내의 중수소 농도와 관련이 있으며, 이러한 특성은 적절한 공정 조건을 갖는 이온 주입법을 통해 개선할 수 있었다. 특히, 큰 스트레스 전압의 PMOSFET에서 중수소의 효과가 뚜렷하게 나타났으며, 이는 "hot" 정공과 중수소의 반응과 관련이 있는 것으로 판단된다.