• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.1-7
• /
• 1998

중형 고속어업지도선의 선형개발에 관한 연구를 조선대학교 회류수조에서 수행하였다. 현재 운항중인 같은 크기의 15노트 급 선형을 모선(CU-015)으로 하여 모선의 선도를 20노트 항주에 적합하도록 길이를 연장하고 선형을 변경하였으며, 고속화에 따른 선수 쇄파를 최소화 할 수 있는 선수선형 개발 및 고마력 기관에 적합한 충분한 용적을 유지하며 저항추진 성능을 향상시킬 수 있는 U-형 선미형상의 개발을 주로 수행하였다. 모선의 선형수정에 많은 제약이 있었으나 결과적으로 도출된 개발선형은 상당한 조파저항 감소의 효과가 있었다.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.69-74
• /
• 2016

A new wave-piercing-type high-speed planing boat without a chine was developed, and its basic performance was investigated in a model test, including the resistance, trim, and sinkage. The maximum speed of the developed ship was 35 knots. The hull form was developed by combining a VSV (very slender vessel) and TH (transonic hull), which have large deadrise angles at the bow. The main dimensions were estimated by a statistical approach using actual ship data. The effect of a side fin attached at the stern near the water line was investigated from a resistance point of view. It was found that the developed hull form showed the possibility of a new concept for a high-speed planing hull without a chine, and the side fin played an important role in increasing the resistance performance by controlling the trim and sinkage in the high-speed range.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.121.3-121
• /
• 2001

The movement of a ship is important for DBS(Direct Broadcasting Satellite) Receiving Antenna control algorithm design on shipboard. Especially, turning of ship is essential factor to affect the angle change of azimuth and elevation. Therefore, to track the satellite stably, we need the tracking method considering turning rate of ship. In this paper, we propose an effective satellite tracking algorithm for DBS receiving antenna on shipboard. In the proposed method, when a ship is turned, it selects one of the Multi tracking modes - Normal mode, Low speed mode, Middle speed mode and High speed mode - according as turning rate to be calculated by using Gyro sensor.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.147-162
• /
• 2021

The problem of predicting a ship's form factor and associated scale effects has been subject to many investigations in recent years. In this study, an attempt is made to investigate whether the form factor is influenced by a change in the ship's speed by numerically modelling a geosim series of the KCS hull form by means of a RANS solver. The turbulence dependence of the problem is also studied by altering the closure model among three widely used approaches (the k-𝜔, k-𝜔 SST, and k-𝜀 models). The results show that at very low speeds (Froude numbers in the range of 0.02-0.06) the numerical model predicts changes in the form factor of a ship between 10% and 20%, depending on the turbulence model and scale factor choices. As the speed is increased further, the form factor exhibits little change, usually in the range of 1% or less. Simulations where the Reynolds number is changed by approximately two orders of magnitude, achieved by altering the value of viscosity, confirmed that the form factor can be considered Froude-dependent only for low speeds, predicting essentially identical values when high speed cases are considered.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.843-852
• /
• 2006

Vibration/noise analysis as well as strength of planetary gear train are considered in order to develop a transmission for a high-speed ship. The vibration model of a gear pair is developed with considering the elastic deformation of the active teeth and the body to be a rigid. Excitation forces of the transmission system are considered as the mass unbalance of the rotors. misalignment and a function of gear transmission error which comes from the modified tooth surface. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors. misalignment and the transmitted errors of the gearing are considered shows that, at the operating speed, there are not the critical speed.

• 대한조선학회지
• /
• 제16권2호
• /
• pp.9-14
• /
• 1979

Havelock was considered the wave resistance of a post extending vertically downwards through the water from the surface, its section by a horizontal plane being the same at all depths and having its breath small compared with its length. This enables us to elucidate certain points of interest in ship resistance. However, the ship has not infinte draft. So, the problem which is investigated in detail in this paper is the wave resistance of a mathematical quadratic model in a uniform stream. The author wishes to study the effect of viriation of draft. The form of the water-plane is varied while keeping in length and the cross sectional area constant. As a numerical example, we calculated the wave resistance for mathematical quadratic ship models. The results are compared with a post having infinite depth. The results are as follows; The models with finer ends have smaller wave resistance up to $V/\sqrt{L}=1.1{\sim}1.2$ than its mate with blunter ends, but above this speed the models with blunter ends have less wave resistance. According to the decrease of draft, the wave resistance gap between the models with blunter ends the models with finer ends decrease at high speed. In this case of T/L=0.025, the models with finer ends have less wave resistance than the models with blunter ends at high speed.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.42-53
• /
• 2002

본 논문에서는 황해의 자연 환경과 물류환경에 대한 조사를 바탕으로, 황해권의 해상수송시스템에 적합한 황해형 고속 여객선에 대하여 선형설계를 수행하였으며, 그에 대한 수치계산과 실험을 통하여 저항 성능을 파악하고자 하였다. 황해형 고속 여객선이 인천국제공항의 부족한 육상교통수송수단의 대안으로서 활용되는 것이 적합하다고 판단되었으며, 인천국제공항으로의 해상운송대책을 제시하고자 하였다. 이를 위하여, 계획항로에 대한 경제성의 평가를 수행하였으며, 황해형 고속 여객선의 선형으로는 쌍동선에 대하여 연구하였다. 설계는 기존 고속선 들의 주요제원 및 항로와 수심, 황해권 물류환경 등의 설계 제조건들을 고려하여 수행되었으며, 공기 공동에 의한 저항감소 효과도 검토되었다. 실험에 앞서 수치계산을 수행하여 설계선형의 저항성능을 검토하였으며, 계산 및 실험은 심해조건 뿐만 아니라 운항항로의 얕은 수심을 고려하여 천수조건에 대하여도 수행되었다. 이와 같은 일련의 선형설계와 수치계산 및 실험으로부터 저항성능을 고려한 황해형 고속선형의 설계능력을 확보하였으며, 앞으로의 황해권 해상수송시스템 구축을 위한 활용가능성을 검토하였다.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.128-135
• /
• 2022

Cavitation occurs inevitably in marine propellers rotating at high speed in the water, which is a major cause of underwater radiated noise. Cavitation-induced noise from propellers rotating at a specific frequency not only reduces the sonar detection capability, but also exposes the ship's location, and it causes very fatal consequences for the survivability of the navy vessels. Therefore cavity inception speed (CIS) is one of the important factors determining the special performance of the ship. In this study, we present a method using computer vision that can detect and quantitatively estimate tip vortex cavitation on a propeller rotating at high speed. Based on the model test results performed in a large cavitation tunnel, the effectiveness of this method was verified.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.85-95
• /
• 1997

그동안 축적된 기술을 활용하여 차세대 "300인승 초고속 수중익 쌍동여객선"의 설계에 대한 연구를 수행하였으며 연구 수행이 극히 성공적으로 완료되어 모형시험을 통하여 확인된 성능은 설계목표를 훨씬 능가하고 있다. 본 연구를 통하여 설계 완료된 "초고속 수중익 쌍동여객선"의 건조 및 시운전은 이미 완료되었으며 가까운 장래에 시운전 결과를 발표하고자 한다.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.154-161
• /
• 2010

The conning display which is located in the ship bridge shows the various important information such as ship position, ship speed, track data, rate of turn, thruster rpm so on, and is one of the IBSs(Integrated Bridge Systems). In this study, the survey was conducted for ten officers to find the importance and using frequency of the information which were displayed in the conning display. The results showed that the information of drift speed, ship speed, wind direction and wind force, rate of turn, sea water depth, ship position, heading, thrust rpm, alarm, rudder command and angle got high scores and it meant that these information were very important and high frequency of use during the navigation. The optimized contents arrangement in conning display was suggested based on importance and using frequency of information. The experiment using eye-tracking system was conducted to compare the performance time and error rate of nine different scenarios for suggested arrangement display and three other existing displays. The results showed that the suggested arrangement was the best in performance time and error rate. The scenario concerning the direction and speed of wind showed faster performance time and lower error rate than other scenarios. The movement of subject's eye tended to search from the center and to avoid the comer, called 'the comer effect.' It is expected that the results of this study could help for the bridge staff to grasp the sailing information easily and to cope with the given situations promptly.