• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1479-1482
• /
• 2006

Potentials and advantages of recently proposed raised bus electrode plasma display panel is discussed in terms of luminous efficiency, addressing speed. Detailed experimental and simulation results, which shows mechanisms of high efficiency driving mechanism, will also be given. Apart from the cell structure, we introduce new high efficiency driving method that can be applicable to conventional ac Plasma Display Panel.

• The KIPS Transactions:PartA
• /
• v.12A no.3 s.93
• /
• pp.263-272
• /
• 2005

The addressing mode for data is performed by the software in yon Neumann-concept(SISD) computer a priori without hardware design of an address counter for operands. Therefore, in the addressing mode for the vector the corresponding variables as much as the number of the elements should be specified and used also in the software method. This is because not for operand but only for an instructions, quasi PC(program counter) is designed in hardware physically. A vector has a characteristic of a structural dimension. In this paper we propose to design a hardware unit physically external to the CPU for addressing only the elements of a vector unit with the structure and dimension. Because of the high speed performance for a vector processing it should be designed in the SIMD pipeline mechanics. The proposed mechanics is evaluated through a simulation. Our result shows $12\%$ to $30\%$ performance enhancement over CRAY architecture under the same hardware consideration(processing unit).

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.417-422
• /
• 1998

In this paper we introduce a method to optimize panel parameters and drive signals in a matrix-adressed bistable twsited-nematic (BTN) liquid crystal display (LCD) panel. We measured the effect of data pulses on optical switching characteristics in a BTN LC cell to model the effect theoretically. We introduce a weighting function to model the effect of data pulses on the switching energy as a function of time. Once the weighting function is known, we can estimate the maximum number of lines for multiplexing operation at a given frame rate by calculating the minimum data pulse width. By characterizing a unit cell as we change panel parameters (for example, d/p ratio), we can optimize parameters for high-speed operation. We found that our theoretical predictions agree very well with experimental results.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.123-125
• /
• 2004

In order to achieve high efficiency and low cost, new high-speed addressing method is suggested. This can be achieved by reducing the address discharge delay time through the priming effect. This paper suggests a new ADR (Address During Reset) driving method which provides priming particles by using a separated driving method without adding auxiliary electrode or auxiliary discharge. The experimental results show an approximately loons reduction in the formative delay time of address discharge and a reduction in jitter of over 200ns. Also, due to enough time being available for reset, there was a reduction in light emitted during reset of about 29% which improved the dark contrast ratio considerably.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.231-235
• /
• 2004

High performance 42 inch XGA PDP with high luminance of 1,000 cd/$m^2$ has been developed using high efficient electrode structure, discharge gas and closed barrier ribs. For high speed addressing with single scan technique, address discharge time lag was reduced over 40% with FAST driving scheme and new materials. High dark room contrast ratio of 5,000 : 1 was achieved and picture quality was improved using new algorithm for eliminating false contour and improving gray level linearity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.355-358
• /
• 2008

We report a method for improving characteristics of AC PDP in this study. This improvement is obtained by spreading MgO nanoparticles on transparent dielectric layer. These nanoparticles are covered with MgO protective layer by electron beam evaporation. MgO nanoparticle has difference in cathodoluminescence stronger than MgO layer by electron beam evaporation. This method worked for reducing statistical delay especially. Efficacy, discharge voltage and luminance were also improved But these improvements has limited lifetime because continuous ion bombardments changed characteristic of MgO surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.388-391
• /
• 2008

A new reset waveform with negative ramp pulse was proposed. Comparative experiments between the negative and positive waveforms were performed. During reset period, IR distributions and luminance of black and white conditions were measured with the 42-inch XGA PDP module. The negative waveform improved contrast ratio about 15.4 ~ 22.5 % than the positive waveform by lowing the black luminance in reset period. Z bias (= Vbb) of the positive waveform was 27 V higher than the negative waveform.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1587-1591
• /
• 2015

For a higher definition discharge cell, the method of high speed addressing is necessary. In order to modify the surface charges, the liquefied $TiO_2$ or MgO powder is added on MgO layer in front glass and on the phosphor in rear glass in micro barrier discharge. Both the electro-optical properties and the discharge time lag characteristics are measured from 4 inch. test panel, such as the discharge voltage, current, luminance, luminous efficacy and discharge time lag. As the results, the statistic time lag is improved by about 40 %.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.641-646
• /
• 2003

Packet processing speed of routers as well as transmission speed of physical links gives a great effect on IP packet transfer rate in Internet. The router forwards a packet after determining the next hop to the packet's destination. IP address lookup is a main design issue for high performance routers. In this paper, we propose a partitioned compressed-trie for speeding-up IP address lookup algorithms based on tie data structure by exploiting path compression. In the ,proposed scheme, IP prefixes are divided into several compressed-tries and lookup is performed on only one partitioned compressed-trie. Memory access time for IP address lookup is lessen due to compression technique and memory required for maintaining partition does not increased.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.4
• /
• pp.1-8
• /
• 2023

Background: This study evaluates the usability of the Motion-Tracking Gait Assistive Walker (MTGAW) designed for elderly individuals and those with disabilities, identifying areas for improvement through interviews with physical and occupational therapists. Design: A survey study involves the usability test for MTGAW. Methods: Usability evaluations were conducted with 37 physical therapists and occupational therapists. The process included explanation, product usage, satisfaction surveys, and interviews. A satisfaction survey covering 19 items across safety, maneuverability, usability, and management areas was administered. Individual interviews identified areas for improvement. Results: Overall, high satisfaction was reported across the four areas, but interviews highlighted the need for improvements, such as addressing discomfort due to slow speed and enhancing safety measures to prevent rear-end falls. Adjusting the walker's height and width to suit the user's physique was also suggested. Conclusion: MTGAW enhances walking support and hand movement freedom but needs refinement in speed control, fall prevention, and customization based on the user physique. Future efforts should focus on developing an improved MTGAW, considering recommendations from physical therapy experts, and conducting studies to analyze its clinical effectiveness for commercialization.