• Journal of Advanced Navigation Technology
• /
• 제14권3호
• /
• pp.351-357
• /
• 2010

This paper proposes the adaptive class-E power amplifier with maintaining high power added efficiency (PAE) to apply RFID and wireless communication system. This switch mode amplifier is used a microprocessor to control a resonator circuits and to maintain high efficiency in case of input frequency variation. To validate the adaptive amplifier operation, which is a 450MHz operating frequency and a 100MHz bandwidth, the class E amplifier is implemented. As a result, the adaptive amplifier is maintained above 60% efficiency in frequency range and has a 74.8% maximum efficiency.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제9권5호
• /
• pp.72-79
• /
• 2010

In this paper, we describe the design and implementation of a high efficiency Doherty power amplifier using gallium nitride (GaN) high-electron mobility transistor (HEMT). The carrier and peaking amplifiers of the proposed Doherty power amplifier consist of the switching-mode Class-E power amplifiers. The test conditions are a duty of 10% and a pulse width of $100\;{\mu}s$ and pulse repetition frequency (PRF) of 1 kHz for a S-band radar application. A RF performance peak PAE of 64% with drain efficiency of 80.6%, at 6 dB output back-off point from saturated output power of 45.5 dBm, was obtained at 2.85 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제39권9호
• /
• pp.44-50
• /
• 2002

Recently, a envelope tracking(ET) amplifier that improves efficiency by changing of the bias according to the RF input level is presented to use for a high power amplifier of cellular radio handset using CDMA. The input and the output impedances of the ET amplifier may be varied by changing of the bias of the amplifier, and it makes the amplifier having low gain, low efficiency, and high input and output VSWR. In order to improve the input and the output mismatch of the amplifier, in this paper, two types of ET amplifier are suggested. In case of an ET amplifier using varactor diode, in experimentation, gain is improved about 7dB and the power consumption of the amplifier is better about 60% than that of the conventional amplifier. In case of a base voltage controlled ET amplifier, the gain and power consumption of the amplifier is improved about 9dB and 40% than those of the conventional amplifier, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제46권2호
• /
• pp.141-146
• /
• 2009

In this paper, a novel harmonic control circuit has been proposed for the design of high-efficiency power amplifier with Si LDMOSFET. The proposed harmonic control circuit haying the short impedances for the second- and third-harmonic components has been used to design the in/output matching network. The efficiency enhancement effect of the proposed harmonic control circuit is superior to the class-F or inverse class-F harmonic control circuit. Also, when the proposed harmonic control circuit has been adapted to the input matching network as well as the output matching network, the of ficiency enhancement effect of the proposed power amplifier has increased all the more. The measured maximum power added efficiency (PAE) of the proposed power amplifier is 82.68% at 1.71GHz band. Compared with class-F and inverse class-F amplifiers, the measured maximum PAE of the proposed power amplifier has increased in $5.08{\sim}9.91%$.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.19-22
• /
• 2004

This paper implemented 2.14GHz band Adaptive Hybrid Doherty (AHD) amplifier, as well as, wished to improve the high power characteristics and efficiency by composing bias adjustment circuit with LDMOS. Finally, through CAE, confirmed that AHD amplifier have superior performance than hybrid balanced amplifier. Superior characteristics of AHD amplifier is expected to affect immensely in amplifier field hereafter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제42권2호
• /
• pp.81-86
• /
• 2005

In this paper, the high linear Doherty amplifier has been realized by employing the PBG(Photonic Band Gap) structure. The PBG structure has been employed on the output matching network of the power amplifier. The proposed Doherty amplifier has been improved in PAE and IMD. The PAE has been $36.4\%$ and the IMD has been -24.5 dBc, respectively.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.143-149
• /
• 2016

This work presents a method used for designing a broadband class-E power amplifier that combines the two techniques of a nonlinear shunt capacitance and a low quality factor of a series resonator. The nonlinear shunt capacitance theory accurately extracts the value of class-E components. In addition, the quality factor of the series resonator was considered to obtain a wide bandwidth for the power amplifiers. The purpose of using this method was to produce a simple topology and a high efficiency, which are two outstanding features of a class-E power amplifier. The experimental results show that a design was created using from a 130 to 180 MHz frequency with a bandwidth of 32% and a peak measured power added efficiency of 84.8%. This prototype uses an MRF282SR1 MOSFET transistor at a 3-W output power level. Furthermore, a summary of the experimental results compared with other high-efficiency articles is provided to validate the advantages of this method.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제11권10호
• /
• pp.935-940
• /
• 2016

Recently, wireless power transmission system is gradually extended to technology in various fields such as lighting field, electric vehicles and smartphones wireless charging system. The largest of the two elements for high transmission efficiency of the wireless power transmission system are resonant coils and power amplifiers. In this paper, in order to build a high efficient wireless power transmission system, we introduce the resonance coil manufacturing method and high efficiency power amplifier design method that operates at 6.78MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제3권3호
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• Journal of Satellite, Information and Communications
• /
• 제5권2호
• /
• pp.82-86
• /
• 2010

In this paper, a power amplifier module for WCDMA base-station applications is designed and implemented using GaN field-effect transistors (FETs), which uses an envelope tracking bias system. The designed module consists of an high gain MMIC amplifier, a driver amplifier, a power amplifier, and bias circuits for envelope tracking applications. Especially, a FET bias sequencing circuit and two isolators are integrated for stable RF operations. All circuits are assembled within a single housing, so its dimension is just $17.8{\times}9.8{\times}2.0\;cm3$. Measured results show that the developed power amplifier module has good envelope tracking capability: the power-added efficiency of 35% at the output power range from 30dBm to 40dBm over a wide range of drain bias.