• Journal of Hydrogen and New Energy
• /
• v.32 no.1
• /
• pp.53-62
• /
• 2021

Batch type reduction-oxidation tests were performed to check effects of temperature, pressure, gas velocity, and capacity on reduction characteristics of mass produced particle in a 0.5 MWth chemical looping combustion system. The fuel conversion and the CO2 selectivity increased as the temperature increased and as the gas velocity decreased. However the CO2 selectivity showed the maximum and decreased as the capacity increased because the CO emission increased. The results show that high temperature, low gas velocity and low inert gas concentration are preferable to ensure high reactivity of oxygen carrier in the fuel reactor.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.63-73
• /
• 1999

The results of residual currents simulation by a three-dimensional hydrodynamic model showed the water volume transport and the residence time to be about 4km³ per tidal cycle and about 6 years through the line of latitude, 34° 25' N in the Yellow Sea, and to be about 13km³ per tidal cycle and about 2.5 years through the southeastern boundary line of the Yellow Sea, respectively. On the bases of the entire seawater volume of the Yellow Sea and dissolved oxygen (DO) in summer, the environmental capacity of the Yellow Sea for reception of the maximum pollution load without reducing DO concentration below 5.0mg/ℓ in seawater may be estimated to be about 58×10/sup 6/tons of chemical oxygen demand (COD), which is equivalent to the load about 8 times as high as the annual organic pollution load from 14 major rivers. On the bases of DO transports by residual currents calculated on the line of 34° 25' N latitude and on the southeastern boundary line of the Yellow Sea being about 57×10³tons and about 203×10³tons of DO per day, respectively, the environmental capacities of the Yellow Sea for reception of the maximum pollution loads without reducing DO concentration in seawater nay be equivalent to COD loads about 3 times and 10 times, respectively, as high as the existing organic pollution loads from 14 major rivers.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.10
• /
• pp.1460-1471
• /
• 2013

Microalgal biofuel production from wastewater has economic and environmental advantages. This article investigates the lipid production from high chemical oxygen demand (COD) bioethanol wastewater without dilution or additional nutrients, using a newly isolated heterotrophic microalga, Chlorella vulgaris LAM-Q. To enhance lipid accumulation, the combined effects of important operational parameters were studied via response surface methodology. The optimal conditions were found to be temperature of $22.8^{\circ}C$, initial pH of 6.7, and inoculum density of $1.2{\times}10^8cells/ml$. Under these conditions, the lipid productivity reached 195.96 mg/l/d, which was markedly higher than previously reported values in similar systems. According to the fatty acid composition, the obtained lipids were suitable feedstock for biodiesel production. Meanwhile, 61.40% of COD, 51.24% of total nitrogen, and 58.76% of total phosphorus were removed from the bioethanol wastewater during microalgal growth. In addition, 19.17% of the energy contained in the wastewater was transferred to the microalgal biomass in the fermentation process. These findings suggest that C. vulgaris LAM-Q can efficiently produce lipids from high-concentration bioethanol wastewater, and simultaneously performs wastewater treatment.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.260-264
• /
• 2014

We developed a novel double dopant bismuth oxide system with Tb and W. When Tb was doped as a single dopant, a Tb dopant concentration more than 20 mol% was required to stabilize bismuth oxides with a high conductivity cubic structure. High temperature XRD analysis of 25 mol% Tb-doped bismuth oxide (25TSB) confirmed that the cubic structure of 25TSB was retained from room temperature to $700^{\circ}C$ with increase in the lattice parameter. On the other hand, we achieved the stabilization of high temperature cubic phase with a total dopant concentration as low as ~12 mol% with 8 mol% Tb and 4 mol% W double dopants (8T4WSB). Moreover, the measured ionic conductivity of 10T5WSB was much higher than 25TSB, thus demonstrating the feasibility of the double dopant strategy to develop stabilized bismuth oxide systems with higher oxygen ion conductivity for the application of SOFC electrolytes at reduced temperature. In addition, we investigated the long-term stability of TSB and TWSB electrolytes.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.5
• /
• pp.947-955
• /
• 2017

Herbicidin A is a potent herbicide against dicotyledonous plants as well as an antibiotic against phytopathogens. In this study, fermentation parameters for herbicidin A production in submerged culture of Streptomyces scopuliridis M40 were investigated. The herbicidin A concentration varied with the C/N ratio. High C/N ratios (>4) resulted in a herbicidin A production of more than 900 mg/l, whereas maximally 600 mg/l was obtained at ratios between 1 and 3.5. In 5-L batch fermentation, there was a positive correlation between the oxygen uptake rate (OUR) and herbicidin A production. Once the OUR increased, the substrate consumption rate increased, leading to an increase in volumetric productivity. Mechanical shear force affected the hyphal morphology and OUR. When the medium value of hyphal size ranged from 150 to $180{\mu}m$, high volumetric production of herbicidin A was obtained with OUR values >137mg $O_2/l{\cdot}h$. The highest herbicidin A concentration of 956.6 mg/l was obtained at 500 rpm, and coincided with the highest relative abundance of hyphae of $100-200{\mu}m$ length and the highest OUR during cultivation. Based on a constant impeller tip speed, which affects hyphal morphology, herbicidin A production was successfully scaled up from a 5-L jar to a 500-L pilot vessel.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.4
• /
• pp.170-177
• /
• 2006

Optimum design of flow channel in the separation plate of Proton Exchange Membrane Fuel Cell is very prerequisite to reduce concentration over potential at high current region and remove the water generated in cathode effectively. In this paper, fully 3 dimensional computational model which solves anode and cathode flow fields simultaneously is developed in order to compare the performance of fuel cell with parallel and interdigitated flow channels. Oxygen and water concentration and pressure drop are calculated and i-V performance characteristics are compared between flows with two flow channels. Results show that performance of fuel cell with interdigitated flow channel is hi민or than that with parallel flow channel at high current region because hydrogen and oxygen in interdigitated flow channel are transported to catalyst layer effectively due to strong convective transport through gas diffusion layer but pressure drop is larger than that in parallel flow channel. Therefore Trade-off between power gain and pressure loss should be considered in design of fuel cell with interdigitated flow channel.

• Environmental Mutagens and Carcinogens
• /
• v.20 no.1
• /
• pp.7-13
• /
• 2000

The mechanisms of benzene toxicity is not fully elucidated, although the metabolism of benzene is very well understood. In order to study the mechanism of benzene toxicity, we investigated DNA damage induced by benzene metabolite, 1,2,4-benzenetriol (BT) in HL-60 cells by alkaline comet assay. To investigate the mechanism of cellular DNA damage induced by BT, the cells were treated with antioxidant such as vitamin C, SOD, catalase, and chelating agent such as deferoxamine (DFO), bathocuproinedisulfonic acid (BCDS). BT induced DNA damage in dose-dependent manner at concentration between 10$\mu\textrm{m}$ and 100$\mu\textrm{m}$. The antioxidant vitamin C itself induced DNA damage at higher concentration. The DNA damage induced by BT in HL-60 cells was protected at low concentraiton of vitamin C whereas no protective effect was found at high concentration. In hibitory effect of SOD on DNA damage by BT was observed and this suggested that BT produce superoxide anion (O2-) causing DNA damage. Catalase protected BT-induced DNA damage suggesting that BT produce H2O2 during autooxidation of BT. Both Fe(II)-specific cheiating agent, deferoxamine (DFO) and Cu(I)-specific chelating agent, bathocuproinedisulfonic acid (BCDS) inhibited BT0induced DNA damage. This suggested that DNA damage was caused by active species which was produced DAN damage. This suggested that DNA damage was caused by active species which was produced by the autooxidation of BT in the presence of Cu(II) and Fe(III). These findings suggest that reactive oxygen species play an important role in the mechanism of toxicity induced by benzene metabolites.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.148-155
• /
• 2006

The diversity of bacterial populations in rivers flowing through Changwon City, was investigated using quinone profiling. The physicochemical properties such as temperature, pH, dissolved oxygen(DO), dissolved organic carbon (DOC) and biochemical oxygen demand (BOD) were also measured in this study. Ubiquinone (UQ)-8, UQ-9 and UQ-10 were observed in all samples for the sites investigated. UQ-8 was the -predominant quinone species in rivers except for Namch'on downstream, T'owolch'on, and Kaumchongch'on in autumn, while UQ-8 was also found as major quinones in the sample except for Hanamch'on, T'owolch'on, Kaumchongch'on, and Namsanch'on in winter. A higher concentration of DOC in rivers yield high concentration of plastoquinone (PQ-9) in autumn and those of total quinones in winter, respectively. Correlation analysis also indicate that BOD is considered to be a major factor controlling the concentration of PQ in rivers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.110-114
• /
• 2000

Effects of the combinations of six oxygen concentrations ($control, 0.6, 1.0, 2.0, 3.4 and 7.4 mg DO/l$) and two salinity levels ($20{\%_{\circ}} and 32{\%_{\circ}}$) on the rates of oxygen consumption, ammonia excretion and mortality of the mysid, Neomysis awatschensis were tested at $20{\circ}C$. The lethal level ($96 hr-LC-(50)$) of dissolved oxygen for mysid at $20{\%_{\circ}} and 32{\%_{\circ}} were 2,20 mg DO/l and 1.60 mg DO/l$ respectively, and all mysids died within $24hr at 0.6 mg DO/l$. Oxygen consumption rate of mysid was increased with dissolved oxygen increase at $20{\%_{\circ}} and 32{\%_{\circ}}$, but ammonia excretion rate was high af $1.0 mg DO/l$ during 96h exposure to DO concentration, and significantly greater in $20{\%_{\circ}} than 32{\%_{\circ}}$. $O:N$ ratio of mysid exposed during 96hr with salinity anil dissolved oxygen was below $10 at 20{\%_{\circ}} and 1,0{\~}2.0 mg DO/l, and was 4.4 at 32{\%_{\circ}} and 1.0 mg DO/l$. These results indicated that mysids were capable of changing their energy substrate in response to salinity and DO changes, and obtaining energy from proteins.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.559-563
• /
• 2004

Both the ultrasonic velocity at 3 MHz and the absorption coefficient in the frequency range from 0.2 to 2 MHz were measured for aqueous solutions of poly(sodium 4-styrenesulfonate) over the concentration range from 5 to $25\%$ (by weight). The pulse echo overlap method was employed to measure the ultrasonic velocity over the temperature range from 10 to $90^{\circ}C;$ the high-Q ultrasonic resonator method was used for the measurement of the absorption coefficient at $20^{\circ}C.$ The velocities exhibited their maximum values at ca. 55, 59, 63, 67, and $71^{\circ}C.$ for the 25, 20, 15, 10, and $5\%$ solutions, respectively. The velocity increased with respect to the poly(sodium 4-styrene-sulfonate) concentration at a given temperature. A study of the concentration dependence of the both the relaxation frequency and amplitude indicated that the relaxation at ca. 200 kHz is related to structural fluctuations of the polymer molecules, such as the segmental motions of the polymer chains and that the relaxation at ca. 1 MHz resulted from the proton transfer reactions of the oxygen sites of $SO_3.$ Both the absorption and the shear viscosity increase upon increasing the polymer concentration, but they decrease upon increasing the temperature.