고온, 고압에서 운용되고 있는 설비의 안전성을 평가하기 위해서는 사용시간 동안 열화된 역학물성을 정기적으로 점검하여야 한다. 비파괴적으로 열화된 설비의 역학적 특성을 점검하기 위하여 표면형 프로브(surface type probe)를 사용한 가역투자율 측정방법이 제시된다. 가역투자율 측정방법은 가역투자율이 자기 이력곡선의 미분값임에 근거하고 있다. 가역투자율은 교류 섭동 자기장의 주파수에 동조된 록-인 증폭기로 측정된 탐지코일에 유도된 전압의 제 1 고조파이다 가역투자율의 첨두값은 보자력 영역에서 나타난다. 실험에 사용된 강재는 12Cr 페라이트 내열강으로 $700^{\circ}C$의 등온에서 열처리 시간을 달리한 11개의 시편을 제작하였다. 가역투자율 첨두값 사이의 간격 (peak interval of reversible permeability: PIRP), 비커스 경도 및 인장강도는 열화가 진행됨에 따라 초기에는 급격하게, 후반에는 완만하게 감소하였다. PIRP가 감소함에 따라 인장강도와 비커스 경도가 선형적으로 감소하였고 이 상관관계를 이용하면 측정한 가역투자율로 12Cr 페라이트 내열강의 열화된 역학적 물성을 비파괴적으로 평가할 수 있다.
20 L 구형 폭발시험장치와 시차주사열량계(DSC)를 사용하여 반응성 유기물 분진의 폭발 및 열분해 특성을 실험적으로 조사하였다. 그 결과 97 % Benzoyl peroxide(BPO), Phthalic anhydride(PA), 1-Hydroxybenzotri azol(HBT)의 폭발하한은 매우 낮은 농도인 10~15 g/$m^3$의 범위로 측정되어 착화위험성이 높은 것으로 나타났다. HBT, PA 및 97 % BPO의 폭발지수는 각각 251, 146, 80 [bar m/s]로서, HBT는 폭발등급 2에 해당한다. 또한 밀폐계 분진폭발의 화염전파 특성을 추정하기 위하여 용기면에의 화염도달시간과 폭발압력을 고려하여 화염전파속도를 예측하였다. 97 % BPO 및 HBT의 열분해 개시온도와 발열량은 각각 $107^{\circ}C$(1025 J/g), $214^{\circ}C$(1666 J/g)로 나타났는데, 이와같이 낮은 열분해 온도와 큰 발열량이 폭발특성에 영향을 주는 것으로 판단된다.
The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.
불안정한 생리활성물질들은 외부 환경에 의해 빠르게 분해된다. 그러므로 이러한 물질들을 안정화시키기 위한 캡슐화 기술은 매우 중요하다. 비타민 $D_3$의 전구체인 7-디하이드로콜레스테롤(7-DHC)은 일반인의 표피 각화세포에서 열충격 단백질(Heat Shock Protein)의 발현을 단백질과 mRNA의 수준에서 증가시키는 것으로 알려졌다. 하지만 7-DHC의 국소용 피부 제제로의 이용은 낮은 용해도와 화학적 불안정성 때문에 이용이 제한되었다. 본 연구에서 7-DHC는 나노에멀젼(NE), 고형 지질 나노 입자 (SLN) 그리고 키토산이 코팅된 고형 지질 나노 입자(CASLN)에 봉입하였다. NE와 SLN은 지질의 용융점 이상의 온도에서 고압의 호모제나이져를 통과시켜 제조하였다. CASLN은 SLN 분산액에 키토산을 용액을 첨가하여 제조하였으며 양(+)의 제타전위를 나타내었다. NE, SLN, CASLN 속에서 7-DHC의 안정도를 각각의 온도조건에서 시간의 경과에 따라 확인하였다. 열분석과 X선 회절 분석은 지질의 결정화 정도를 확인하기 위해서 수행하였다. 그 결과, CASLN은 기존의 SLN보다 불안정한 7-DHC를 효과적으로 봉입함으로서 안정성을 개선시켰다.
Kim, Sung Ho;Lee, Bu Hyung;Kwon, Soo Il;Kim, Jae Seok;Kim, Gi-sub;Park, Min Seok;Jung, Haijo
한국의학물리학회지:의학물리
/
제27권3호
/
pp.156-161
/
2016
When air discharged from a radioisotope production facility is contaminated with radiation, the public may be exposed to radiation. The objective of this study is to manage such radiation exposure. We measured the airborne radioactivity concentration at a 30 MeV cyclotron radioisotope production facility to assess whether the exhaust gas was contaminated. Additionally, we investigted the radioactive contamination of the air filter for efficient air purification and radiation safety control. To measure the airborne radiation concentration, specimens were collected weekly for 4 h after the beginning of the radioisotope production. Regarding the air purifier, five specimens were collected at different positions of each filter-pre-filter, high-efficiency particulate air filter, and charcoal filter-installed in the cyclotron production room. The concentrations of F-18, I-123, I-131, and Tl-201 generated in the radioiodine production room were $13.5Bq/m^3$, $27.0Bq/m^3$, $0.10Bq/m^3$, and $11.5Bq/m^3$, respectively; the concentrations of F-18, I-123, and I-131 produced in the radioisotope production room were $0.05Bq/m^3$, $16.1Bq/m^3$, and $0.45Bq/m^3$, correspondingly; and those of F-18, I-123, I-131, and Tl-201 generated in the accelerator room were $2.07Bq/m^3$, $53.0Bq/m^3$, $0.37Bq/m^3$, and $0.15Bq/m^3$, respectively. The maximum radiation concentration of I-123 generated in the radioiodine production room was 1,820 Bq/g, which can be disposed after 2 days. The maximum radiation concentration of Tl-202 generated in the radioisotope production room was 205 Bq/g, and this isotope must be stored for 53 days. The I-123 generated in the radioiodine production room had a maximum concentration of 1,530 Bq/g and must be stored for 2 days. The maximum radiation concentration of Na-22 generated in the radioisotope production room was 0.18 Bq/g and this isotope must be disposed after 827 days. To manage the exhaust, the efficiency of air purification must be enhanced by selecting an air purifier with a long life and determining the appropriate replacement time by examining the differential pressure through systematic measurements of the airborne radiation contamination level.
본 연구에서는 의복 착용 시 직물이 스치면서 발생하는 왕복마찰음에 대한 물리적 소리특성과 주관적 감각을 고찰하기 위해, 왕복운동을 이용한 직물마찰음발생장치를 개발하고 이 장치를 이용하여 5가지 직물의 왕복마찰음을 녹음한 후, 총음압(LPT), 음압차(${\Delta}L$), 주파수차(${\Delta}f$)를 계산하였다. 왕복마찰음에 대한 주관적 감각은 7개의 소리감각(부드러움, 시끄러움, 날카로움, 맑음, 거침, 높음, 유쾌함)에 대하여 의미미분척도로 평가되었다. 나일론 태피터와 폴리에스테르 레노 직물의 왕복마찰음은 높은 LPT를 나타내어 시끄럽고 날카롭고 거칠며 불쾌한 소리로 인지되었다. 반면 LPT와 ${\Delta}f$의 값이 작은 폴리에스테르 울트라스웨이드와 실크 크레이프드신 직물의 왕복 마찰음은 부드럽고 조용한 소리로 평가되었다. 마찰방향(왕복 방향, 한 방향)에 따른 직물의 마찰음 비교시, 왕복 방향 마찰음은 한 방향 마찰음보다 더 날카롭고 시끄럽고 거칠게 인지되었으며 마찰방향에 상관없이 LPT가 소리감각을 예측하는 중요한 요인으로 나타났다.
ZnO nanostructures were developed on a Si (100) substrate from powder mixture of ZnO and 5 mol% Pd (ZP-5) as reactants by ${\times}$ sccm oxygen pressures(x= 0, 10, 20, 40). DTA (differential thermal analysis) result shows the Pd(5 mol%)+ZnO mixtured powder(PZ-5) is easily evaporated than pure ZnO powder. The PZ-5 mixtured powder was characterized by DTA to determine the thermal decomposition which was found to be at $800^{\circ}C$, $1,100^{\circ}C$. Weight loss(%) and ICP (inductively coupled plasma) analysis reveal that Zn vaporization is decreased by increased oxygen pressures from the PZ-5 at $1,100^{\circ}C$ for 30 mins. Needle-like ZnO nanostructures array developed from 10 sccm oxygen pressure, was well aligned vertically on the Si substrate at $1,100^{\circ}C$ for 30 mins. The lengths of the Needle-like ZnO nanostructures is about 2 ${\mu}m$ with diameters of about 65 nm. The developed ZnO nanostructures exhibited growth direction along [001] with defect-free high crystallinity. It is considered that Zn vaporization is responsible for the growth of Needle-like ZnO nanostructures by controlling the oxygen pressures. The photoluminescence spectra of ZnO nanostructures exhibited stronger 376.7 nm NBE (near band-edge emission) peak and 529.3 nm DLE (deep level energy) peak.
본 연구에서는 토크 측정과 고압 시차주사 열량계를 이용하여 pyrrolidone, caprolactam, acrylamide 계열 수용성 고분자들의 하이드레이트 저해 성능을 평가하였다. 실험 결과, 세 종류의 고분자가 모두 동역학적인 하이드레이트 생성억제제 효과를 나타내는 것으로 확인되었으며, 특히 0.5 wt% polyvinylcaprolactam (PVCap)의 경우 34.4분의 하이드레이트 유도 시간, 15.9 K의 subcooling 성능을 보이며 12.3 분, 6.0 K의 순수 물 시스템보다 월등한 저해 성능을 나타내었다. 0.5 wt% polyvinylpyrrolidone (PVP)의 경우 중간 정도의 저해 성능을 보였으며, polyacrylamide-co-acrylic acid partial sodium salt (PAM-co-AA)의 경우 각각 0.5 wt%와 5.0 wt%의 농도에서 미미한 하이드레이트 저해 성능을 보였다. 반면에 생성된 하이드레이트 입자의 성장속도와 생성 양에서는 PAM-co-AA가 PVCap과 더불어 가장 월등한 저해 효과를 나타내었다. 또 다른 주요 성능 평가 요소 중 하나인 토크 변화의 경우에는 PVCap이 평균 토크 6.4 N cm로 가장 좋은 성능을 보였으며, 0.5 wt%의 PAM-co-AA 시스템이 평균 7.2 N cm의 값으로 그 뒤를 이었다. 고압 시차주사 열량계를 이용한 수용성 고분자 물질의 저해 성능 평가 실험의 결과는 autoclave 실험의 결과와 유사하였다. PVCap을 첨가한 경우 하이드레이트가 생성되기까지의 유도시간이 가장 길어서 저해성능이 뛰어난 것을 확인하였다.
배 경 : 급성호흡곤란으로 응급실에 내원한 환자에서 그 원인질환을 감별하는 것은 효율적인 치료에 매우 중요하나 임상양상만으로 감별진단하기는 어려운 경우가 많다. 최근에 쉽게 측정하고 확인이 가능한 생화학적 표지자인 B-type natriuretic peptide에 대해 연구가 이루어지고 있다. 방 법 : 2004년 3월부터 7월까지 한양대학교병원 응급실로 급성호흡곤란을 주소로 내원한 261명의 환자를 대상으로 혈청 BNP를 측정하였고 임상적 소견을 후향적으로 분석하였다. 결 과 : 대상환자를 증상의 원인에 따라 크게 심부전군(n=119, 382, 113-1230 pg/ml)과 비심부전군(n=142, 29, 7-81 pg/ml)으로 나누었고(사람수, 중위수, 백분위수 25-백분위수 75), 하위집단으로 심부전군은 COPD와 좌심부전이 동반된 군(n=5, 820, 354-1620 pg/ml), 폐성심군(n=3, 1650, 239-1990 pg/ml), 좌심부전군(n=111, 378, 106-1120 pg/ml)으로, 비심부전군은 COPD군(n=20, 39, 21-101 pg/ml), 기타 호흡기질환군(n=56, 59, 10-129 pg/ml), 기타 다른 원인군(n=66, 15, 6-47 pg/ml)으로 분류하였다. 혈장 BNP는 원인 질환에 따라 유의한 차이를 보였으며(p<0.001), COPD군과 좌심부전이 동반된 COPD군을 비교했을 때 심부전이 동반될 때 혈장 BNP가 의미있게 높았다(p=0.002). 당뇨병, 고혈압, 흡연 및 신부전 등 심질환의 위험인자가 없는 환자들에서 심부전의 동반 유무와 BNP값을 비교해 보았을 때, 심부전이 동반된 경우 의미있게 BNP값이 증가되어 있었다(p<0.001). 또한, BNP가 133 pg/ml이상일 경우 예민도 0.73, 특이도 0.87로 심부전에 대한 치료에 반응할 수 있는 환자군을 감별할 수 있었다. 결 론 : 혈장 BNP는 급성호흡곤란의 감별진단에서 심부전의 유무를 알아내고 효율적인 치료를 앞당기는데 유용한 검사이다. 특히, 기존의 호흡기 질환을 가지고 있거나 심장질환의 위험요인이 없더라도 BNP가 높은 수치를 보일 경우에는 심부전의 가능성을 고려해서 환자에게 접근해야 한다.
본 총설은 1980년대부터 최근까지 국내외 학술잡지나 심포지움 등에 발표된 인삼의 주요 임상효능 연구결과를 요약 고찰하고, 그 임상 적응증과 안전성 등에 대한 검토를 통해 금후 인삼의 임상적 활용성 제고와 인삼의 진정한 약용가치 평가를 위한 임상연구의 발전에 도움을 주고자 하였다. 당뇨병을 비롯한 동맥경화성 질환, 고혈압, 악성질환, 성기능 장애 등의 만성질환에 대한 그 동안의 연구결과는 인삼의 치료효과보다는 예방 및 회복제로서의 효용성을 보여 주었다. 특히 이들 질환의 각종 자각적 장해증상과 장기 약물치료의 부작용으로 인한 QOL의 악화에 에 대한 개선효과가 관찰되었다. 그러나 인삼의 효과는 일반적으로 mild 하여 일차적 치료보다는 관행적 약물요법과 병용할 때 보조요법제로서 또는 부작용을 보다 적게 하는 효과가 기대된다. 또한 주요 강장효능과 관련하여 작업수행능력에 미치는 임상연구 결과는 인삼복용이 각종 스트레스 상태하의 신체적 조건에 대한 적응능력을 개선시켜 육체적 정신적 기능저하를 회복시키는 효과를 보였다. 이러한 임상시험에서 얻어진 결과가 그대로 인삼의 적응증(indication)이라고 단정할 수는 없으며, 그 효능의 과학적 증거들에 대해서는 아직도 논란이 많고, 임상실험의 유효성 평가와 관련된 방법론적 문제점도 많이 지적되고 있다. 보다 확실한 적응증 제시를 위해서는 표준화된 인삼시료를 이용하여 보다 체계적인 시험설계에 의한 객관적 효능평가가 필요하다. 한편 인삼(제품)복용에 의한 부작용(adverse effects)의 발생 가능성에 대한 사례보고들도 대부분 인삼의 과량복용이나 품질관리 미흡에서 기인되는 것으로 여겨지고 있다. 최근 해외 시장에서 유통되는 인삼제품 품질검사에서 사포닌 성분의 불검출 또는 함량 미달과 유해성분의 오염가능성 등 부정적 견해들이 다수 보고되었다. 그러나 표준화된 인삼제품의 추천 복용량을 사용한 대부분의 임상실험에서는 거의 유의할만한 부작용은 인정되지 않았다. 금후 연구와 관련하여, 품질표준의 지표성분으로 간주되는 진세노사이드의 절대함량과 그 성분조성 차이에 따른 임상효과의 차별성이 있는지에 대한 검토와, 특히 최근 실험적으로 밝혀지고 있는 사포닌 성분의 장내 세균에 의한 생물전환체의 인체 실험을 통한 효과 검정이 필요하다. 나아가서는 적정 복용량의 설정과 이와 관련되는 생체내 동태 및 생체이용율(bioavilability)에 관한 정보가 거의 없으므로 이것도 금후 검토해야 할 과제로 사료된다. 인삼은 전통약물로서 오랜 역사성과 그동안의 연구결과에 의한 과학성을 가지고 있으므로 건강유지와 병의 예방 및 회복촉진을 위한 보조요법제 또는 기능성 식품으로써의 유용성이 있는 것으로 판단된다. 앞으로 인삼의 활용성 증대를 위해서는 보다 과학적인 임상평가에 의한 안전성 및 유효성 입증과 제품의 엄격한 품질관리의 필요성이 더욱 강조되어야 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.