• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.44-56
• /
• 1997

Influence of electrochemical etching conditions on capacitance gain of aluminium electrolytic on capacitor foil has been investigated by etching cubic textured high purity aluminum foil in dilute hydrochloric acid. Uniformly distributed etch pit tunnels on aluminum surface have been obtained by pretreatment aluminium foil in 10% NaOH solution for 5 minutes followed by electrochemical etching. Electrostatic capacitance of etched aluminium foil anodized to high voltage increased with the increase of current density, total charge, temperature and concentration of electrolyte up to maximum CV-value and then deceased. Election optical observation of the etched foil revealed that the density of etch of etch pits increased with the increase of current density and concentration of electrolyte. this increase of etch pit density enlarged of the increase of capacitance. However, abnormal high current density and high electrolyte concentration induced the local dissolution of the foil surface which resulted the decrease of foil capacitance.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.738-739
• /
• 2006

This paper will describe a powder and processing method that facilitates single press-single sintered densities approaching $7.5g/cm^3$. At this sintered density, mechanical properties of the powder metal (P/M) component are significantly improved over current P/M technologies and begin to approach the performance of wrought steels. High performance gears have the added requirement of rolling contact fatigue durability that is dependent upon localized density and thermal processing. Combining high density processing of engineered P/M materials with selective surface densification enables powder metal components to achieve rolling contact fatigue durability and mechanical property performance that satisfy the performance requirements of many high strength automotive transmission gears. Data will be presented that document P/M part performance in comparison to conventional wrought steel grades.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.231-234
• /
• 2002

This thesis is to introduce development process and application for domestic production of Automation System for High Density and Perpendicular Storage used in the industrial field. Most of the traditional Automation Systems for High Density and Perpendicular Storage are imported and using in the industrial field. As a result of this condition, foreign competitive power is decreased cause increasing of production cost. In spite of economical burden to protect a loss with management in the case of the industrial field dealing with various products, imported Automation System for High Density and Perpendicular Storage is used. On this developed Automation System for High Density and Perpendicular Storage solved these problems. Developed system uses managing computer, it is easy to manipulate input and output of production and inventory management. Moreover, Developed system accomplished shortened driving time and mechanical safety.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.261-266
• /
• 1998

In developing the high density memory device, the etching of fine pattern is becoming increasingly important. Therefore, definition of ultra fine line and space pattern and minimization of damage and contamination are essential process. Also, the high density plasma in low operating pressure is necessary. The candidates of high density plasma sources are electron cyclotron resonance plasma, helicon wave plasma, helical resonator, and inductively coupled plasma. In this study, planar type magnetized inductively coupled plasma etcher has been built. The density and temperature of Ar plasma are measured as a function of rf power, flow rate, external magnetic field, and pressure. The oxide etch rate and selectivity to polysilicon are measured as the above mentioned conditions and self-bias voltage.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1938-1939
• /
• 2001

시스템을 입력과 출력간의 함수관계로 볼 때 출력에 대한 상대차수가 정의되지 않는 점을 특이점이라고 정의할 수 있다. 본 논문에서는 적절한 기하학적 조건을 만족하는 해석적인 시스템(analytic system)에 대하여 그러한 특이점의 성질을 살펴본다. 특이점을 지나는 궤적은 특이점의 특이도와 그에 관련된 함수 값의 부호에 의해서 특이점의 주변에서는 특이 매니폴드를 기준으로 한 영역에서 나머지 다른 영역으로 통과하거나 혹은 그를 기준으로 어느 한 쪽의 영역에만 머물러 있게 됨을 보임으로써 특이점과 이를 지나는 궤적의 상관관계를 명확히 규명하였다.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.209-215
• /
• 2004

In a trial involving 120 pigs, the growth performance of finishing pigs and proximate composition, physicochemical properites and fatty acid composition of loin muscle were investigated by feeding the high-energy density diet and low-energy density diet. The treatments included feeding 1) the low-energy density diet (3,290 cal/kg DE, 14.50% CP, 0.70% lysine and 0.78% Ca) for 38 days and 2) the hight-energy density diet (3,350 cal/kg ME, 15.0% CP, 0.70% lysine and 0.78% Ca) for 27 days. The average daily gains were significantly higher for pigs fed the high-energy density diet than those fed the low-energy density diet, but average daily feed intake and feed conversion rate were significantly lower than those fed the low-energy density diet (p<0.05). The cooking loss and yellowness of pork were significantly (p<0.05) lower for pigs fed the low-energy density diet than those fed the high-energy density diet. There were no significant differences in carcass characteristics, proximate composition and fatty acid composition of pork. In conclusion, the results of the experiment suggested that the high-energy density diet for pigs tended to improve the growth performance, but the cooking loss and yellowness of pork were higher for pigs fed the high-energy density diet than those fed the low-energy density diet.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2092-2094
• /
• 2000

As a next generation lithography (NGL) technology for VLSI semiconductor fabrication, electron beam, ion beam, X-ray and extreme ultraviolet(EUV) are considered as possible candidates. Among these methods, EUV lithography(EUVL) is thought to be the most probable because it is easily realized by improving current optical lithography technology. In order to set EUV radiation which can be applied to EUVL, it is essential to generate very high density and high temperature plasma stably. The method using a pulse power laser and a high voltage pulse discharge is commonly used to accomplish such a high density and high temperature plasma. In this paper we review the recent trends of the EUV generation technique by high density and high temperature plasma.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.79-80
• /
• 2016

In this study, we measured the relative density and the compressive strength in order to select the appropriate W/ B for the ultra-high strength concrete development. If W/B is lowered than the W/B of highest relative density, it was confirmed that the strength is lowered. However, if water is increased than the W/B of highest relative density, the relative density is decreased compressive strength was similar. The selection of the W/B of the lower than the highest relative density is not appropriate. Appropriate W/B is selected to be more than the maximum relative density of W/B.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.95-101
• /
• 2016

This paper proposed a high-power density bidirectional converter for hybrid electric vehicle high-voltage DC-DC converter(HDC). The conventional HDC has two disadvantages. First, large inductance is required to satisfy the ripple current of inductor by low switching frequency (<20 kHz). Second, large core size is required to prevent the saturation of inductor by high current. Compared with the conventional HDC, the proposed HDC can reduce inductance with SiC-FET for high frequency driving. High-power density of I/O capacitors can be achieved through two-phase interleaved method. The high-power density of inductors can be achieved because the offset current of magnetizing inductance is theoretically terminated by using the differential mode coupled inductor instead of using two single inductors. The validity of the proposed converter is proved through the 50 kW prototype.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.4
• /
• pp.329-335
• /
• 2010

We investigate the sources of the variation of the high-latitude thermospheric neutral mass density depending on the interplanetary magnetic field (IMF) conditions. For this purpose, we have carried out the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEGCM) simulations for various IMF conditions under summer condition in the southern hemisphere. The NCAR-TIEGCM is combined with a new empirical model that provides a forcing to the thermosphere in high latitudes. The difference of the high-latitude thermospheric neutral mass density (subtraction of the values for zero IMF condition from the values for non-zero IMF conditions) shows a dependence on the IMF condition: For negative $B_y$ condition, there are significantly enhanced difference densities in the dusk sector and around midnight. Under the positive-$B_y$ condition, there is a decrease in the early morning hours including the dawn side poleward of $-70^{\circ}$. For negative $B_z$, the difference of the thermospheric densities shows a strong enhancement in the cusp region and around midnight, but decreases in the dawn sector. In the dusk sector, those values are relatively larger than those in the dawn sector. The density difference under positive-$B_z$ condition shows decreases generally. The density difference is more significant under negative-$B_z$ condition than under positive-$B_z$ condition. The dependence of the density difference on the IMF conditions in high latitudes, especially, in the dawn and dusk sectors can be explained by the effect of thermospheric winds that are associated with the ionospheric convection and vary following the direction of the IMF. In auroral and cusp regions, heating of thermosphere by ionospheric currents and/or auroral particle precipitation can be also the source of the dependence of the density difference on the IMF conditions.