• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.173-175
• /
• 2009

A dc/dc converter for low voltage of battery application and fuel cell system is required to step up and regulate the low and widely variable voltage. In this paper, we have proposed a soft switching boost converter with high voltage gain using a single switch. Through the theoretical analysis and experimental result, operation modes and characteristics of the proposed topology is verified.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2005-2015
• /
• 2016

A high-step-up DC/DC converter for renewable energy systems is proposed. The proposed structure provides high voltage gain by using a coupled inductor without the need for high duty cycles and high turn ratios. The voltage gain is increased through capacitor-charging techniques. In the proposed converter, the energy of the leakage inductors of the coupled inductor is reused. This feature reduces the stress on the switch. Therefore, a switch with low ON-state resistance can be used in the proposed converter to reduce losses and increase efficiency. The main switch is placed in series with the source. Therefore, the converter can control the energy flow from the source to the load. The operating principle is discussed in detail, and a steady state analysis of the proposed converter is conducted. The performance of the proposed converter is verified by experimental results.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.369-374
• /
• 2011

Usually, a LPF (low pass filter) is used in the feedback loop of a SRF (synchronous reference frame) - PLL (phase locked loop) system because the measured grid voltage contains harmonic distortions and sensor noises. In this paper, it is shown that the cut-off frequency of the LPF should be designed to suppress the harmonic ripples contained in the measured voltage. Also, a new design method for the loop gain of the PI-type controller in the SRF-PLL is proposed with consideration of the dynamics of the LPF. As a result, a better transient response can be obtained with the proposed design method. The LPF frequency and the PI controller gain are designed in coordination according to the steady state and dynamic performance requirements. Furthermore, in the proposed method, the controller gain and the LPF cut-off frequency are changed from their normal value to a transient value when a voltage disturbance is detected. This paper shows the feasibility and usefulness of the proposed methods through the computer simulations and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.517-520
• /
• 2002

This paper has been studied Operational Amplification Circuit that has high power specification of 90 W is designed. In the input differential amplifier stage, the current source for circuit bias is designed to protect device from high voltage source. the criving state has the voltage gain more than input differential stage. With temperature compensation design, output stage works stable in different to temperature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.309-312
• /
• 2002

In this paper, we discuss the design of high gain low noise amplifier by using the 0.2sum CMOS technology. A cascode inverter is adopted to implement the low noise amplifier. The proposed cascode inverter LNA is one stage amplifier with a voltage reference and without choke inductors. The designed 2.4GHz LNA achieves a power gain of 25dB, a noise figure of 2.2dB, and power consumption of 255㎽ at 2.5V power supply.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.28-33
• /
• 2003

기계적인 에너지를 전기적인 에너지로 변환시키는 장치인 압전변압기는 고전압\ulcorner고효율의 소형변압기이다. 압전변압기는 노트북용 LCD backlight 구동장치로 적합하며, 공진주파수에서 동작시 거의 정현파에 가까운 교류파형을 출력하는 장치이다. 본 논문에서는 입력 DC 전압으로부터 FET를 구동시키는 게이트 신호로 변환시킨 다음 LC공진을 통하여 정현파를 생성시켜 압전변압기를 구동시키는 인버터에 대하여 논의하였다. 실험결과 압전변압기의 전압 이득과 공진주파수는 부하에 비례하며, 전압 이득은 입력전압의 변화에는 무관하게 나타났다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.276-281
• /
• 2005

This paper presents a low voltage operating IF QPSK receiver block which is consisted of programmable gain amplifier (PGA) and analog to digital converter. This PGA has 6 bit control and 250MHz bandwidth, $0{\sim}20\;dB$ gain range. Using the proposed PGA architecture (low distortion gain control switch block), we can process the continuous fully differential $0.2{\sim}2.5Vpp$ input/output range and 44MHz carrier with 2 MHz bandwidth signal at 1.8V supply voltage. Using the sub-sampling technique (input freq. is $44{\sim}46MHz$, sampling freq. is 25MHz), we can process the IF QPSK signal ($44{\sim}46MHz$) which is the output of the 6 bit PGA. We can get the SNDR 35dB, which is the result of PGA and ADC at full gain mode. We fabricated the PGA and ADC and the digital signal processing block of the IF QPSK with the 0.18um CMOS MIM process 1.8V Supply.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.39-45
• /
• 1997

This study presents the first experimental data for the impact of hot-carrier degradtion on the performance of CMOS folded-cascode op-amps. A folded-cascode op-amp which has an NMOS input pair has been designed and fabricated using a 0.8.mu.m single-poly, double-metal CMOS process. After high voltage stress, the degradtion of perfomrance parameters such as open-metal CMOS process. After high voltage stress, the degradation of performance parameters such as open-loop voltage gain, unity-gain frequency and phase margin has been analized and physically explaniend in terms of hot carrier degradation.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.315-322
• /
• 2009

기존의 부스트 컨버터는 출력 전압이 커질수록 스위치와 다이오드의 전압, 전류 스트레스가 커지고 다이오드 역 방향회복에 의한 서지로 인해 실제 사용 가능한 승압비가 제한된다. 본 논문에서는 고승압 응용에 적합한 새로운 비절연 부스트 컨버터를 제안한다. 제안한 컨버터는 듀티비 0.5로 약 6배의 승압비를 가지며 CCM에서도 ZVS 스위칭이 가능하므로 넓은 ZVS 영역을 갖는다. 또한 스위치와 다이오드 전압정격이 출력전압의 1/3로 작고 인터리빙이 가능하여 입출력 수동소자의 정격도 작다. 다이오드도 ZCS 턴오프 동작으로 인해 역방향 회복에 의한 서지가 거의 없다. 제안하는 컨버터의 동작원리를 설명하였고 이론적 해석과 시뮬레이션 및 실험을 통해 타당성을 검증하였다.

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.464-470
• /
• 2015

In this paper, a non-isolated three-level high step-up boost converter with output voltage balancing is proposed. By adding one extra inductor to the conventional three-level boost converter, the proposed converter is derived. Compared with the traditional boost converter and the three-level boost converter, the proposed converter can obtain very high voltage conversion ratio, and the voltage and current stress of switching devices and diodes are reduced. A 2.7 kW prototype converter is built and tested to verify performances of the proposed converter.