• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.475-478
• /
• 2007

This study presents the use of multi-temporal JERS-1 SAR images to extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo and field survey. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• ETRI Journal
• /
• v.40 no.6
• /
• pp.788-793
• /
• 2018

3D reconstruction of urban architecture, land, and roads is an important part of building a "digital city." Unmanned aerial vehicles (UAVs) are gradually replacing other platforms, such as satellites and aircraft, in geographical image collection; the reason for this is not only lower cost and higher efficiency, but also higher data accuracy and a larger amount of obtained information. Recent 3D reconstruction algorithms have a high degree of automation, but their computation time is long and the reconstruction models may have many voids. This paper decomposes the object into multiple regional parallel reconstructions using the clustering principle, to reduce the computation time and improve the model quality. It is proposed to detect the planar area under low resolution, and then reduce the number of point clouds in the complex area.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.57-65
• /
• 2010

In this study, disaster damage investigation system was developed using high resolution satellite images and GIS technique to afford effective damage investigation system for widely disaster damaged area. Study area was selected in Bonghwa, Gyungsangbukdo where high magnitude of damages from torrential rain has occurred at July in 2008. GIS DB was built using 1:5,000 topographic map, cadastral map, satellite image and aerial photo to apply for investigation algorithm. Disaster damage investigation system was developed using VB NET languages, ArcObject component and MS-SQL DBMS for effective management of damage informations. The system can finding damaged area comparing pre- and post-disaster images and drawing damaged area according to the damage item unit. Extracted object was saved in Shape file format and overlayed with background GIS DB for obtaining detail information of damaged area. Disaster damage investigation system using high resolution spatial images can extract damage information rapidly and highly reliably for widely disaster areas. This system can be expected to highly contributing to enhance the disaster prevention capabilities in national level field investigation supporting and establishing recovery plan etc. This system can be utilized at the plan of disaster prevention through digital damage information and linked in national disaster information management system. Further studies are needed to better improvement in system and cover for the linkage of damage information with digital disaster registry.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1041-1047
• /
• 2017

There are many methods for surveying the status of a road, and the use of unmanned aerial vehicle (UAV) photo is one such method. When the UAV images are too large to be processed and suspected to be redundant, a texture extraction technique is used to transform the data into a reduced set of feature representations. This is an important task in 3D simulation using UAV images because a huge amount of data can be inputted. This paper presents a texture extraction method from UAV images to obtain high-resolution images of bridges. The proposed method is in three steps: firstly, we use the 3D bridge model from the V-World database; secondly, textures are extracted from oriented UAV images; and finally, the extracted textures from each image are blended. The result of our study can be used to update V-World textures to a high-resolution image.

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.359-367
• /
• 2002

In this paper, a new embedded wavelet packet image coder algorithm is proposed for an effective image coder using correlation between partitioned coefficients. This new algorithm presents parent-child relationship for reducing image reconstruction error using relations between individual frequency sub-bands. By parent-child relationship, every coefficient is partitioned and encoded for the zerotree data structure. It is shown that the proposed wavelet packet image coder algorithm achieves low bit rates and rate-distortion. It also demonstrates higher PSNR under the same bit rate and an improvement in image compression time. The perfect rate control is compared with the conventional method. These results show that the encoding and decoding processes of the proposed coder are simpler and more accurate than the conventional ones for texture images that include many mid and high-frequency elements such as aerial and satellite photograph images. The experimental results imply the possibility that the proposed method can be applied to real-time vision system, on-line image processing and image fusion which require smaller file size and better resolution.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.5
• /
• pp.59-71
• /
• 2020

Using high-resolution stereoscopic aerial images (in 2008, 2012 and 2016), we conducted to analyze the spatial characteristics affecting evergreen coniferous die-off in the northwestern ridge (major distribution area such as Abies nephrolepis), Seoraksan National Park. The detected number of dead trees at evergreen coniferous forest (5.24㎢) was 1,223 in 2008, was 2,585 in 2012 and was 3,239 in 2016. The number of cumulated dead trees was 7,047 in 2016. In recent years, the number of dead trees increased relatively in the northwest ridge, Seoraksan National Park. Among the analysed spatial factor (altitude, aspect, slope, solar radiation and topographic wetness index), the number of dead trees was increased in the conditions with high altitude, steep slope and dry soil moisture. A spatial distribution of dead tree was divided into 2 groups largely (high altitude with high solar radiation, low altitude with steep slope). In conclusion, the dead trees of evergreen coniferous were concentrated at spatial distribution characteristics causing dryness in the northwestern ridge, Seoraksan National Park.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.79-90
• /
• 2017

Urban environment represent one of the most dynamic regions on earth. As in other countries, forests, green areas, agricultural lands are rapidly changing into residential or industrial areas in South Korea. Monitoring such rapid changes in land use requires rapid data acquisition, and satellite imagery can be an effective method to this demand. In general, SAR(Synthetic Aperture Radar) satellites acquire images with an active system, so the brightness of the image is determined by the surface roughness. Therefore, the water areas appears dark due to low reflection intensity, In the residential area where the artificial structures are distributed, the brightness value is higher than other areas due to the strong reflection intensity. If we use these characteristics of SAR images, settlement areas can be extracted efficiently. In this study, extraction of settlement areas was performed using TerraSAR-X of German high-resolution X-band SAR satellite and KOMPSAT-5 of South Korea, and object-oriented image classification method using the image segmentation technique is applied for extraction. In addition, to improve the accuracy of image segmentation, the speckle divergence was first calculated to adjust the reflection intensity of settlement areas. In order to evaluate the accuracy of the two satellite images, settlement areas are classified by applying a pixel-based K-means image classification method. As a result, in the case of TerraSAR-X, the accuracy of the object-oriented image classification technique was 88.5%, that of the pixel-based image classification was 75.9%, and that of KOMPSAT-5 was 87.3% and 74.4%, respectively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.201-205
• /
• 2007

In the post-Cold War era, acquisition technique of high-resolution satellite imagery (HRSI) has begun to commercialize. IKONOS-2 satellite imaging data is supplied for the first time in the 21st century. Many researchers testified mapping possibility of the HRSI data instead of aerial photography. It is easy to renew and automate a topographical map because HRSI not only can be more taken widely and periodically than aerial photography, but also can be directly supplied as digital image. In this study matching size of IKONOS Geo-level stereo image is presented lot production of digital elevation model (DEM). We applied area based matching method using correlation coefficient of pixel brightness value between the two images. After matching line (where "matching line" implies straight line that is approximated to complex non-linear epipolar geometry) is established by exterior orientation parameters (EOPs) to minimize search area, the matching is tarried out based on this line. The experiment on matching size is performed according to land cover property, which is divided off into four areas (water, urban land, forest land and agricultural land). In each of the test areas, window size for the highest correlation coefficient is selected as propel size for matching. As the results of experiment, the proper size was selected as $123{\times}123$ pixels window, $13{\times}13$ pixels window, $129{\times}129$ pixels window and $81{\times}81$ pixels window in the water area, urban land, forest land and agricultural land, respectively. Of course, determination of the matching size by the correlation coefficient may be not absolute appraisal method. Optimum matching size using the geometric accuracy therefore, will be presented by the further work.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.3-9
• /
• 2016

UAV(unmanned aerial vehicle) can quickly produce orthoimage with high-spatial resolution and DSM(digital surface model) at low cost. However, vertical and horizontal positioning accuracy of orthoimage and DSM, which are obtained by UAV, are influenced by image processing techniques, quality of aerial photo, the number and position of GCPs(ground control points) and overlap in flight plan. In this study, effects of overlap and the number of GCPs are analyzed in orthoimage and DSM. Positioning accuracy are estimated based on RMSE(root mean square error) by using dataset of nine pairs. In the experiments, Overlaps and the number of GCPs have influence on horizontal and vertical accuracy of orthoimage and DSM.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.25-33
• /
• 2022

In this study, a monitoring method using high-resolution images acquired by unmanned aerial vehicles and deep learning algorithms was proposed for the management of the Sinduri coastal sand dunes. Class classification was done using U-net, a semantic division method. The classification target classified 3 types of sand dune vegetation into 4 classes, and the model was trained and tested with a total of 320 training images and 48 test images. Ignored label was applied to improve the performance of the model, and then evaluated by applying two loss functions, CE Loss and BCE Loss. As a result of the evaluation, when CE Loss was applied, the value of mIoU for each class was the highest, but it can be judged that the performance of BCE Loss is better considering the time efficiency consumed in learning. It is meaningful as a pilot application of unmanned aerial vehicles and deep learning as a method to monitor and manage sand dune vegetation. The possibility of using the deep learning image analysis technology to monitor sand dune vegetation has been confirmed, and it is expected that the proposed method can be used not only in sand dune vegetation but also in various fields such as forests and grasslands.