• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.39-44
• /
• 2012

Nanopowders of TiCo were synthesized from Ti and Co by high energy ball milling. Highly dense nanostructured TiCo compounds were consolidated at low temperature by pulsed current activated sintering within 3 minutes from the mechanical synthesis of the powders (TiCo) and horizontal milled Ti+Co powders under 100 Mpa pressure. This process allows very quick densification to near theoretical density and prohibits grain growth in nanostructured materials. The grain sizes of the TiCo compounds were calculated. Finally, the average hardness values of the nanostructured TiCo compounds were investigated.

• 식품과학과 산업
• /
• 제53권4호
• /
• pp.435-443
• /
• 2020

Korea has entered into an aged-society in 2018. If this trend continues to increase, it is expected that a super-aging society will take place by 2026. Therefore, Korea is placed in the situation of becoming the world's fastest aging nation as it becomes a super-aging society from an aged-society in twenty-six years. In order to provide an effective supply of nutrition for the socially weak, Japan developed a variety of foods with food texture improvements. Germany improved accessibility for meal service development. Senior-friendly food is a softened food or a highly concentrated drink, which is considered a texture-modified food, for the elderly with eating disorders to digest food more easily by making food particles smaller. Varying food processing techniques such as freeze-thawing enzyme impregnation, high-pressure processing, super-heated steam processing, 3D food print, and others used to produce texture-modified foods.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.54-60
• /
• 2005

Tungsten Inert Gas(TIG) welding is today one of the most popular arc welding process because of its high quality welds and low equipment costs. Even if welding productivity increases with welding speed and current, this strategy is limited by the appearance of defects such as undercut and humping bead due to the depressed molten metal. The purpose of this study investigates the effect of He mixing ratio on the characteristics with high current and speed in TIG welding. The conclusions obtained permit to explain the arc start characteristics quantitatively and the maximum welding speed on stable bead formation with He mixing ratio for high current and speed TIG welding observed in experiments. Also through the relation of the maximum arc pressure and surface depression depth at high current and speed TIG welding, it made clear the mechanism of unstable bead formation.

• 폴리머
• /
• 제24권4호
• /
• pp.529-537
• /
• 2000

본 연구에서는 압출된 PP sheets를 각기 다른 조사량으로 조사 가교시켜, 겔 분율 차이에 따른 세 종류의 샘플을 만든 다음, 회분식 공정을 통해 초임계 유체 (supercritical fluid) 상태의 $CO_2$를 발포제로 사용하여 발포시켰다. 이때, 겔 분율의 차이 및 고압 반응기 내에서 충진 압력과 충진 시간이 셀 구조에 미치는 영향을 관찰하였다. 다음으로, 발포조건에 따른 셀 구조 변화를 알아보기 위해 발포온도와 발포시간을 변화시키면서 실험하였다. 고분자 샘플 내로 침투한 가스의 양은 겔 분율의 차이에 의한 변화가 거의 없었으며, 충진 압력이 2000 psi 이상일 경우 충진 압력의 영향에도 큰 영향을 받지 않았다. 겔 분율이 낮은 샘플은 발포온도나, 발포시간이 증가함에 따라 셀 크기가 불균일하게 증가하였으나, 겔 분율이 높은 샘플은 높은 발포온도와 발포시간에서도 균일하게 셀 크기를 유지하며 안정한 구조를 나타내었다.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.51-57
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was designed by using the Venturi meter and compared velocity, pressure, arc shape in the flat position with existing CP-nozzle. As a result, Venturi-type nozzle's maximum velocity and pressure was improved at the same flow rate. Also heat input was increased by the arc contraction in the flat position.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.26-30
• /
• 1995

We describe the preparation and characterization of epitaxial thin films made with high temperature superconductor, $YBa_2Cu_3O_{7-\delta}$. The influence of processing parameters for YBCO thin films on MgO substrates in-situ grown by the pulsed laser deposition, including parameters of a laser beam energy, oxygen pressure, substrate temperature, target-substrate dis-tance is discussed. The characteristics of YBCO thin films were analyzed by using XRD, R-T measurement, AFM, crosssectional TEM, and RBS. For examples of microwave device applications, The fabrication and characterization of the microstrip lowpass filter and bandpass filter are also presented.

• Composites Research
• /
• 제14권1호
• /
• pp.15-21
• /
• 2001

고강성 카본 섬유 복합재료의 높은 비강성을 이용하여 가압 롤러를 설계·제작하였다. 롤러 제작을 위한 최적의 적층 순서는 유한요소해석을 통해 얻어졌으며, 고무코팅층의 형상은 롤러의 축 길이를 따라 필름에 가해지는 균일 압력에 대해 계산되어진 변형에 근거하여 결정하였다. 제작된 가압 롤러의 정적 변형을 해석결과와 실험적으로 비교하였으며, 그것의 동적 독성은 진동 시험을 통하여 측정하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.912-915
• /
• 2004

A vacuum environment is very important for NGL(Next Generation Lithography) apparatuses such as EUVL(Extreme Ultra Violet Lithography) or EPL(Electron Projection Lithography) and so on. The performance of these systems is dominated by vacuum level of processing and positioning accuracy of a stage. So, ultra-precision stage usable in a high vacuum level is needed for the improved performance of these devices. In contrast to atmospheric condition, a special attention must be paid to guide bearing, actuator and other elements. In this paper, air bearing is adopted because of its very high motional accuracy. So, air bearing is designed to be vacuum compatible using differential exhaust method, which prevents air from entering into vacuum chamber. For this, leakage analysis is performed theoretically and verified from experiment.

• 생약학회지
• /
• 제21권4호
• /
• pp.284-289
• /
• 1990

Crude Aconiti Tubers were irradiated with microwave for 5 or 10 min with or without $NaHCO_3$. Ten min-irradiation reduced the contents of aconitine and mesaconitine to the level of those of commercially available processed Aconiti tuber power which is prepared with the high pressure-high temperature technique. The contents of benzoylaconine of the 10 min-irradiated Aconiti tubers were also comparable to those of commerciallized processed Aconiti tuber powder. However, irradiation with 1% $NaHCO_3$ soln. resulted in the drastic reduction of all the three above alkaloids.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.125-128
• /
• 2004

In this paper, a novel processing technique for fabrication of high-temperature MEMS based on polymer-derived SiCN microstructures is described. PDMS molds are fabricated on SU-8 photoresist using standard UV-photolithographic processes. Liquid precursors are injected into the PDMS mold. And then, the resulting solid polymer structures are crosslinked under isostatic pressure, and pyrolyzed to form a ceramic capable of withstanding over $1500^{\circ}C$. These fabricated SiCN structures would be applied for high-temperature applications, such as heat exchanger and combustion chamber.