• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.413-414
• /
• 2014

This paper proposed an optimized design of a dual active bridge converter for a low-voltage charger. The dual active bridge converter among various bi-directional DC/DC converters is a high-efficiency isolated bi-directional converter. In the general design, when the battery voltage is high, the ZVS region is reduced. In contrast, when the battery voltage is low, the efficiency is low due to high conduction loss. In order to increase the ZVS region and the power conversion efficiency, depending on the battery voltage, variable switching frequency method is applied. At the same duty, the same power is obtained regardless of the battery voltage using the variable switching frequency method. The proposed method was applied to a 5kW prototype converter, and the experimental results were analyzed and verified.

• 전력전자학회논문지
• /
• 제17권6호
• /
• pp.532-538
• /
• 2012

This paper proposes the Mathematical Modeling for HEV High-power Lithium-Polymer Battery. The nonlinear system of the Lithium Battery electrical characteristic express mathematical state equation. We also test charge/discharge and temperature experimental used to identify parameters of the cell find parameter of the least error. The proposed model experimental results is used with battery cycler to verify of the proposed model.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.193-199
• /
• 2014

The series connected battery cells are mainly used in high voltage battery pack application. However parameter inequality of each battery cell makes battery voltage imbalance problem. In this paper, a new balancing circuit utilizing converter scheme for the series connected battery cells is proposed. Proposed circuit offers easy control and fast equalization time. Moreover the circuit can be used in a practical application because it has high modularity and can operate during the charging/discharging cycle. To show its superiorness and effectiveness, the principle of proposed circuit is explained with computer simulation and experiment is carried out using lithium-ion battery.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.460-465
• /
• 2013

Electrical equipments of nuclear power plant are divided into class 1E and non-class 1E. Electrical equipment and systems that are essential to emergency reactor shutdown, containment isolation, reactor core cooling, and containment and reactor heat removal, are classified as class 1E. batteries of nuclear power plant are divided into four channels, which are physically and electrically separate and independent. The battery bank of class 1E DC power system of the nuclear power plant use lead-acid batteries in present. The lead acid battery, which has a high energy density, is the most popular form of energy storage. Kt factor of lead-acid battery is used to determine battery size and it is one of calculatiing coefficient for capacity. this paper analyzes Kt factor of lead-acid battery for the DC power system of nuclear power plant. In addition, correlation between Kt parameter and peukert's exponent of lead-acid battery for nuclear plant are discussed. The analytical results contribute to optimize of determining size Lead-acid battery bank.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1740-1744
• /
• 2017

This paper describes the preparation and characteristics of a battery capacitor and module for solar power system. A cylindrical 30,000F battery capacitor ($60{\times}138mm$) was assembled by using the $LTO(Li_4Ti_5O_{12})$ electrode as an anode and $NMC(LiNiMnCoO_2)-LCO(LiCoO_2)$ as a cathode. The battery capacitor has reduced energy density and power density under high CC(constant current) and CP(constant power) conditions. Battery capacitor module (16V, 11Ah) was fabricated using an asymmetric hybrid capacitor with a capacitance of 30,000F. In order to determine the characteristics of the battery capacitor Module for solar power system, battery capacitor cells were connected in series with active balancing circuit. As a result of measuring the 100w LED lamp, it was discharged at the voltage of 15V~10V, and the compensation time at discharge was measured to be about 4979s. Experimental results show that it can be applied to applications related to solar power system by applying battery capacitor module.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.873-877
• /
• 2009

본 연구는 독성물질을 함유한 납축전지와 니켈카드뮴전지를 대체할 수 있는 니켈금속수소전지를 이용하여 철도시스템 비상전원용으로 사용위해 80Ah 전지를 병렬로 연결하여 160Ah의 니켈금속수소전지 제작하였다. 160Ah 전지에 적합한 전극을 개발하기 위하여 3성분계의 전해질의 고율방전에 대해 평가하였다. 160Ah급 전지는 철도시스템 비상전원용으로 사용하기 위한 여러 가지 실험을 하여 평가를 하였다.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.580-585
• /
• 2019

배터리는 ESS, 전기자동차 및 무정전 전원 백업 시스템 등의 다양한 분야에서 사용이 증가하고 있다. 납산배터리는 에너지밀도가 낮지만, 신뢰성이 높고 저가격의 이점으로 대용량 전력백업 장비에 가장 많이 사용되는 배터리이다. 배터리의 사용에 따라 노화가 진행되면 충전 가능 용량(SoH)이 줄어들게 되어 상태를 추정하는 것이 매우 중요하며, 배터리의 내부저항으로 SoH를 추정하는 방법을 많이 사용한다. 본 논문에서는 대표적인 대용량 무정전 전원장치인 IDC를 위한 배터리 모니터링 시스템(BMS)을 제안하였다. 내부저항을 측정하는 간단한 알고리즘을 제안하고, BMS 시스템 구성을 위한 CPU 및 아날로그 회로 구성과 신호처리 알고리즘에 대한 연산 블록도를 보였다. 실제 IDC 현장에 적용한 측정결과 사례를 제시하여 제안한 방법의 유용함을 보였다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1438-1445
• /
• 2015

A new DC-DC power converter is researched for renewable energy and battery hybrid power supplies systems in this paper. At the charging mode, a renewable energy source provides energy to charge a battery via the proposed converter. The operating principle of the proposed converter is the same as the conventional DC-DC buck converter. At the discharging mode, the battery releases its energy to the DC bus via the proposed converter. The proposed converter is a non-isolated high step-up DC-DC converter. The coupled-inductor technique is used to achieve a high step-up voltage gain by adjusting the turns ratio. Moreover, the leakage-inductor energies of the primary and secondary windings can be recycled. Thus, the conversion efficiency can be improved. Therefore, only one power converter is utilized at the charging or discharging modes. Finally, a prototype circuit is implemented to verify the performance of the proposed converter.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.735-737
• /
• 2017

An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

• 한국정보통신학회논문지
• /
• 제21권7호
• /
• pp.1455-1463
• /
• 2017

세계경기가 저성장, 저소비, 높은 실업률, 고위험, 짧은 호황 긴 불황 등을 기록하고 있다. 이에 따라 해운경기가 하락하여 선박 유지비용의 절감이 불가피해지고 있다. 이를 위해 그린 선박, 에코 선박, 스마트 선박과 같은 선박의 에너지를 절감하기 위한 연구가 활발히 진행 중에 있다. 친환경 선박에서 배터리를 사용하는 전력관리시스템은 중요한 연구분야 중 하나이다. 본 논문에서는 발전기만을 사용하는 일반적인 선박의 전력관리시스템의 중부하 제어를 분석하고 배터리 연계형 전력관리시스템에서 중부하를 제어하는 알고리즘을 연구하였다. 이를 위해 배터리 연계형 전력관리시스템의 구성을 제안하고 제안된 시스템을 기반으로 배터리 연계형 전력 시뮬레이터를 구성하였다. 구성된 시뮬레이터를 통해 배터리 연계형 전력관리시스템에서 중부하 제어에 따른 배터리의 동작을 정의하고 이를 확인하였다.