• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.1-5
• /
• 2010

We developed a novel micro-electro mechanical systems (MEMS) test socket using silicon on insulator (SOI) substrate with the cantilever array structure. We designed the round shaped cantilevers with the maximum length of $350{\mu}m$, the maximum width of $200{\mu}m$ and the thickness of $10{\mu}m$ for $650{\mu}m$ pitch for 8 mm x 8 mm area and 121 balls square ball grid array (BGA) packages. The MEMS test socket was fabricated by MEMS technology using metal lift off process and deep reactive ion etching (DRIE) silicon etcher and so on. The MEMS test socket has a simple structure, low production cost, fine pitch, high pin count and rapid prototyping. We verified the performances of the MEMS test sockets such as deflection as a function of the applied force, path resistance between the cantilever and the metal pad and the contact resistance. Fabricated cantilever has 1.3 gf (gram force) at $90{\mu}m$ deflection. Total path resistance was less than $17{\Omega}$. The contact resistance was approximately from 0.7 to $0.75{\Omega}$ for all cantilevers. Therefore the test socket is suitable for BGA integrated circuit (IC) packages tests.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.4
• /
• pp.201-206
• /
• 2011

Purpose: Subtalar distraction arthrodesis is useful treatment option for restore hindfoot alignment. but, using structural autograft have high risk of donor site morbidity. Recently, by replacing the structural allograft has been reported satisfactory clinical results. Therefore, the authors reviewed the results of subtalar distraction arthrodesis using a structural allograft, retrospectively. Materials and Methods: From January 2008 to May 2010, 12 patients (12 feets; 9 male, 3 female) underwent subtalar distraction arthrodesis using frozen structural allograft. 9 cases were calcaneal malunion, 2 were nonunion or malunion after subtalar arthrodesis, 1 was other cause. Mean age was 38.9 (12~66) years old and follow up period was 16.5 (12~36) months. Surgical was performed with posterolateral approach and tricortical allobone block of frozen femoral neck was used. Analysis was done with retorspective manner to evaluate preoperative, postoperative, and final follow up radiologic measurement and AOFAS ankle-hindfoot scale. Results: There was statistically significant increase (p<0.05) of ankle-hindfoot scale from preoperative 27.5 points to postoperative 72.5 points, talocalcaneal height by 6.62 mm, calcaneal pitch angle by 5.73 degrees, lateral talocalcaneal angle by 6.38 degrees and significant decrease (p<0.05) of tali-1st metatarsal angle by 5.23 degrees. 11 feet (91.7%) acquired bony union and it takes average 5.1 months. Final post-operative result revealed talocalcaneal height changed by 2.57 mm, calcaneal pitch anble, lateral talocalcaneal angle, talar-1st metatarsal angle were changed by 2.63 degrees, 1.62 degrees, 1.18 degrees, respectively (p<0.05). 3 cases of partial osteonecrosis of posterior facet of calcaneus were observed in operation field, 4 cases of complication were developed (1 case of nonunion, 1 collapse of allobone graft, 1 screw loosening, 1 superficial skin necrosis). Conclusion: Subtalar distraction arthrodesis using frozen structural allobone graft is useful alternative treatment method of arthrodesis with structural autobone graft.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.48-53
• /
• 1988

This study was carried out to investigate the effects of pressing time and spreading amount, moisture content, gap-distance with butt to butt joint and adhesives on bonding strength in manufacturing the laminated wood with Pitch pine (Pinus rigida). The results obtained were as follows: 1) The pressing time of 12 hours, 10 kilogram per square centimeter of pressure and 200 gram per square meter of spreading amount were required to reach over 50 kilogram per square centimeter (block shear strength) in manufacturing the laminated wood by aqueous vinyl urethane adhesive. 2) The bonding strength decreased with the increase of moisture content of wood. The block shear strength, however, showed over 100 kilogram per square centimeter when the strength test was carried out after air-drying the laminated wood in high moisture content (30-70%). 3) Regardless of direction of load, every flexural property decreased with the increase of gap-distance with butt to butt joint. However, little of every flexural property was changed at 0.5 millimeter of joint-gap distance. The flexural property of vertically laminated wood (perpendicular to glue line to load direction: 1) showed more than that of horizontally laminated wood (parallel to glue line to load direction: //). 4) Among five adhesives used at this experiment, the bonding strength of aqueous vinyl urethane adhesive was the highest in dry bond and wet tests.

• Korean Journal of Digital Imaging in Medicine
• /
• v.6 no.1
• /
• pp.24-30
• /
• 2003

Flat-panel detector(FPD) is the driving force for realizing the next gene ration of x-ray system. In this study, we developed amorphous selenium(a-Se) based flat-panel digital X-ray detector(DXD) for radiography. The prototype detector consists of an amorphous selenium layer and a thin-film transistor(TFT) array. Comparing to other papers1)-4), optimization of amorphous selenium and progress of evaporation were similar. The pixel pitch of fabricated detector was $139{\mu}m$, fill factor was 86%, and the size was 14"${\times}$8.5". Hand and test bar pattern images were acquired. A high modulation transfer function(MTF) factor was obtained: 58% at 3.0 lp/mm.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.435-442
• /
• 2004

We obtained precise linear transverse displacements from the results of signal processing on moire fringes measured by the superposition of a fixed self-imaging elongated circular(EC) grating and a moved EC grating. The linear displacement less than one pitch of the moving EC grating was calculated from the position of a bright moire fringe generated on the linear grating part of the EC gratings. The moire signals were high-frequency-filtered, smoothed, curve-fitted, and first-differentiated moire signals in sequence. Also the linear displacement created by movement by the unit of integer times of a pitch was readily measured by the count of the even number of zero-crossing points corresponding to bright moire fringes obtained by the above same processing without curve fitting. Then we can measure linear transverse displacements with the accuracy of better than 3 %, which are more accurate values than those by the traditional visual method within the displacement of 80 ${\mu}{\textrm}{m}$.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.599-604
• /
• 2015

This study was conducted the vegetation clustering analysis for the 3 mountains of Mt. Bulam, Mt. Daemo, Mt. Bonghwa which were the urban forests of Seoul. Based on the results of the analysis related to the vegetation clustering, it was found that the clustering of Mt. Bulam consisted of pine trees(Pinus densiflora)-Mongolian oak(Quercus mongolica), Hornb eam(Carpinus laxiflora)-Pitch pine(P. rigida), oriental oak(Q. variabilis) - a wild pear tree(Sorbus alnifolia) while the clustering of Mt. Daemo consisted of Pitch pine-Japanese larch(Larix leptolepis), Poplar(Populus tomentig landulosa)- black birch(Betula davurica pall). Meanwhile, the clustering of Mt. Bonghwa consisted of pine trees-a wild pear tree Community and Sawtooth oak(Q. acutissima)-Cherry Blossoms(Prunus serrulata). In relation to the similarity index by region in Mt. Bulam, Mt. Daemo, and Mt. Bonghwa, the similarity index of Mt. Bulam and Mt. Daemo stood at as high as 0.634, suggesting the distribution of similar vegetation, and the dominance index of the Mt. Daemo region was found to be 0.166 which suggests the dominance of many species compared to other regions. In addition, the results of species diversity showed that Mt. Daemo had the highest stability, and the species diversity, maximum species diversity, evenness indices were highest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo. The dominance index was the lowest in Mt. Bulam, followed by Mt. Bonghwa and Mt. Daemo.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.115-118
• /
• 2002

Parameters used in a speaker recognition system are desirable expressing speaker's characteristics filly and have in a speech. That is to say, if inter-speaker than intra-speaker variance a big characteristic, it is useful to distinguish between speakers. Also, to make minimum error between speakers, it is required the improved recognition technology as well as the distinguishing characteristics. When we see the result of recent simulation performance, we obtain more exact performance by using dynamic characteristics and constant characteristics by a speaking habit. Therefore we suggest it to solve this problem as followings. The prosodic information is used by a characteristic vector of speech. Characteristics vector generally using in speaker recognition system is a modeling spectrum information and is working for a high performance in non-noise circumstance. However, it is found a problem that characteristic vector is distorted in noise circumstance and it makes a reduction of recognition rate. In this paper, we change pitch line divided by segment which can estimate a dynamic characteristic and it is used as a recognition characteristic. we confirmed that the dynamic characteristic is very robust in noise circumstance with a simulation. We make a decision of acceptance or rejection by comparing test pattern and recognition rate using the proposed algorithm has more improvement than using spectrum and prosodic information. Especially stational recognition rate can be obtained in noise circumstance through the simulation.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.257-261
• /
• 2005

The microbial cellulose is in a form of three dimensional net structures that consists of 20~50 nm fibrils. It possesses high crystallinity and orientation. It is difficult to synthesize large amount of fibrous carbon nanomaterials by the carbonization process using raw materials such as polyacrylonitrile (PAN), regenerated cellulose (Rayon) and pitch. However, it seems possible thru the application of microbial cellulose as raw material. The application of such cellulose can be further extended to the synthesis of highly oriented graphite fiber. Out of three different cellulose-producing strains, G. xylinus ATCC11142 was chosen as it has the highest productivity (0.066 g dried cellulose/15 mL medium). Tar is often produced during the carbonization of cellulose that limits the formation fibrous structure of the carbonized sample. In order to solve such a problem, pre-studied purification methods of carbon nanotube such as liquid phase oxidation, gas phase oxidation and filtration associated with ultrasonication were applied at the carbonized cellulose. In that case. only by filtration associated with ultrasonication, improved the formation of fiber structure of the carbonized cellulose.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.37-43
• /
• 1999

Modules of the system that requires large capacity and high-speed information processing are implemented in the form of MCM that allows high-speed data processing, high density circuit integration and widely applied to such fields as ATM, GPS and PCS. Hence we developed the ATM switching module that is consisted of three chips and 2.48 Gbps data throughput, in the form of 10 multi-layer by Cu/Photo-BCB and 491pin PBGA which size is $48 \times 48 \textrm {mm}^2$. hnologies required for the development of the MCM includes extracting parameters for designing the substrate/package through the interconnect characterization to implement the high-speed characteristics, thermal management at the high-density MCM, and the generation of the testability that is one of the most difficult issues for developing the MCM. For the development of the ATM Switching MCM, we extracted signaling delay, via characteristics and crosstalk parameters through the interconnect characterization on the MCM-D. For the thermal management of 15.6 Watt under the high-density structure, we carried out the thermal analysis. formed 1.108 thermal vias through the substrate, and performed heat-proofing processing for the entire package so that it can keep the temperature less than $85^{\circ}C$. Lastly, in order to ensure the testability, we verified the substrate through fine pitch probing and applied the Boundary Scan Test (BST) for verifying the complex packaging/assembling processes, through which we developed an efficient and cost-effective product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.411-411
• /
• 2012

Over the recent years, surface enhanced Raman spectroscopy (SERS) has dramatically grown as a label-free detecting technique with the high level of selectivity and sensitivity. Conventional SERS-active nanostructured layers have been deposited or patterned on rigid substrates such as silicon wafers and glass slides. Such devices fabricated on a flexible platform may offer additional functionalities and potential applications. For example, flexible SERS-active substrates can be integrated into microfluidic diagnostic devices with round-shaped micro-channel, which has large surface area compared to the area of flat SERS-active substrates so that we may anticipate high sensitivity in a conformable device form. We demonstrate fabrication of flexible SERS-active nanostructured substrates based on soft-lithography for simple, low-cost processing. The SERS-active nanostructured substrates are fabricated using conventional Si fabrication process and inkjet printing methods. A Si mold is patterned by photolithography with an average height of 700 nm and an average pitch of 200 nm. Polydimethylsiloxane (PDMS), a mixture of Sylgard 184 elastomer and curing agnet (wt/wt = 10:1), is poured onto the mold that is coated with trichlorosilane for separating the PDMS easily from the mold. Then, the nano-pattern is transferred to the thin PDMS substrates. The soft lithographic methods enable the SERS-active nanostructured substrates to be repeatedly replicated. Silver layer is physically deposited on the PDMS. Then, gold nanoparticle (AuNP) inks are applied on the nanostructured PDMS using inkjet printer (Dimatix DMP 2831) to deposit AuNPs on the substrates. The characteristics of SERS-active substrates are measured; topology is provided by atomic force microscope (AFM, Park Systems XE-100) and Raman spectra are collected by Raman spectroscopy (Horiba LabRAM ARAMIS Spectrometer). We anticipate that the results may open up various possibilities of applying flexible platform to highly sensitive Raman detection.