• 한국가금학회지
• /
• 제42권1호
• /
• pp.87-100
• /
• 2015

It is well known that dietary protein affects the growth performance and carcass composition of poultry. Over the last several decades, numerous studies have been carried out to investigate to optimize the level of dietary protein since the protein is an important and expensive constituent in poultry feed. It is generally accepted that dietary protein should represent a balance of amino acids supporting the requirements for growth and maintenance of birds. A protein with balanced essential amino acids that matches a bird's requirement and sufficient non-essential amino acid nitrogen to enable the synthesis of all of the non-essential amino acids, is referred to as an 'ideal protein'. Feeding of excess protein or amino acids may result in an amount of nitrogen emission. Most common method to reduce nitrogen emission is using diet formulation which has lower dietary crude protein level and higher concentration of amino acid supplements. However, there are conflicting reports whether low protein diets supplemented with synthetic amino acids can obtain the growth performance equal to high protein diets. Excessive nitrogen excretion caused by amino acid imbalance also may influence the environment of poultry house due to ammonia production from uric acid. These environmental conditions may increase the incidence of skin problem or respiratory diseases of chickens. Various strategies based on comprehensive understanding should be tested to optimize nitrogen utilization and reduce nitrogen emission while maintaining the performance in poultry production.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.201-206
• /
• 2003

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed fir a hierarchical control structure consisting of basic level and high level that modify control rules. The proposed SOFC scheme is simple in structure, fast in computation and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for robot with eight joints.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.187-192
• /
• 2004

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In the synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules. The proposed SOFC scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for robot with eight joints.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.102-107
• /
• 2000

In this paper, it is presented a new technique to the design and real-time implementation of fuzzy control system based-on digital signal processors in order to improve the precision and robustness for system of industrial robot. Fuzzy control has emerged as one of the most active and fruitful areas for research in the applications of fuzzy set theory, especially in the real of industrial processes. In this thesis, a self-organizing fuzzy controller for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variable of the controller, In tile synthesis of a FLC, one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult, SOFC is proposed for a hierarchical control structure consisting of basic level and high level that modify control rules.

• 한국농공학회논문집
• /
• 제48권1호
• /
• pp.27-38
• /
• 2006

In this study, we developed a program to estimate discharge efficiently considering major hydraulic characteristic including water level, river bed, water slope and roughness coefficient in a natural river. Stream discharge was measured at Gongju gauge station located in the down stream of the Daechung Dam during normal and dry seasons from 2003 to 2004. The developed model was compared with the results from the existing rating curve at T/M gage stations, and was used for runoff analyses. Evaluating the developed river discharge estimation program, it was applied during 1983-2004 that base flow separation method and RRFS (Rainfall Runoff Forecasting System) which is based on SSARR (Streamflow Synthesis And Resevoir Regulation). The result presents the stage-discharge curve creator range at the Gong-ju is overestimated by approximately $10-20\%$, especially at the low stage. It is attributed to the hydraulic characteristics at the study. The discharge simulated by the RRFS and base flow separation, which is calibrated using the measurement at the early spring and late fall season during relatively d]v season, shows the least errors. The coefficient of roughness at Gongju station varied with the high and low water level.

• Journal of Microbiology and Biotechnology
• /
• 제28권6호
• /
• pp.902-908
• /
• 2018

Optimization of the culture medium to maximize menaquinone-7 (MK-7) production by Bacillus subtilis strain KCTC 12392BP in static culture was carried out using statistical experimental methods, including one factor at a time, fractional factorial design, and response surface methodology (RSM). Maltose (carbon source), tryptone (nitrogen source), and glycerol (activator) were identified as the key medium components for MK-7 synthesis by the fractional factorial design, and were selected for statistical optimization by RSM. The statistical analysis indicated that, in the range that was studied, maltose, tryptone, and glycerol were all critical factors having profound effects on the production of MK-7, with their coefficients for linear and quadratic all significant at the p < 0.05 level. The established model was efficient and feasible, with a determination coefficient ($R^2$) of 0.9419. The predicted concentrations of maltose, tryptone, and glycerol in the optimal medium were determined as 36.78, 62.76, and 58.90 g/l, respectively. In this optimized medium, the maximum yield of MK-7 reached a remarkably high level of $71.95{\pm}1.00{\mu}g/ml$ after 9 days of static fermentation, which further verified the practicability of this optimized strategy.

• 한국컴퓨터정보학회논문지
• /
• 제4권1호
• /
• pp.7-14
• /
• 1999

본 논문에서는 상위수준합성에서의 연산자 할당 및 바인딩을 위한 방법을 다루었다. 스케쥴링 후 각 제어스텝에 지정된 연산을 연산자에 할당하기 위한 새로운 방법을 제시하였다. 특히 최적의 할당 및 바인딩 결과를 얻기위해 ILP 기법을 이용하였다. HAL시스템에서 사용된 Differential Equation DFG 모델을 실험대상으로 하여 본 연구의 효용성을 입증하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2008년도 추계학술대회
• /
• pp.251-253
• /
• 2008

최근 유럽에서 DVB-T HDTV 방송 표준이 정하지면서 오디오 포맷으로 HE-AAC가 채택되었다. HE-AAC는 압축효율은 높지만 연산량이 높아 낮은 성능의 DSP에서 수행하기에는 어려움이 있다. DVB-T에서는 5.1채널을 사용하고 있어 더욱더 많은 연산을 필요로 한다. 본 논문은 ISO/DEC 14496-3 MPEG4 HE(High Efficiency)-AAC의 Level4에 해당하는 Multichannel Decoder를 최적화하여 구현하고. 가장 많은 연산을 필요로 하는 Synthesis Filter Bank에 제안된 알고리즘을 적용하여 연산량을 줄였고 대부분의 연산부를 어셈블리로 코드 최적화를 하여 작은 성능의 DSP를 사용하여 실시간 Multichannel HE-AAC Audio Decoder의 구현이 가능하게 하였다. DVB-T 오디오 시스템에 필수로 필요한 Audio Description, Dynamic Range Control, Downmix 등을 함께 구현하여 실제 수신기에 사용이 가능하도록 하였다. DSP는 Samsung의 CalmRISC16 + MAC24 core 를 사용하였다.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.73-87
• /
• 1991

This paper presents a new approach to the scheduling problem in the high level synthesis. In this approach, iterative rescheduling processes starting with ASAP(As Soon As Possible) scheduling result are performed in a branch-and-bound manner so to arrive at the scheduling result of the lowest hardware cost under the given timing constraint. At each iteration step, only the selected nodes are considered for rescheduling, and the lower bound cost estimation is performed to avoid the unnecessary attempts to search for an optimal result. This branch-and-bound method turns out to be effective in pruning the search space, and thus reducing run time considerably in many cases.

• 한국정보처리학회논문지
• /
• 제2권1호
• /
• pp.106-118
• /
• 1995

본 연구에서는 스케쥴링과 하드웨어 할당에 관련된 상위단계합성에서 최적설계 방법론을 효과적으로 변형된 시뮬레이티드 어닐링 기법을 사용하여 정립한다. 또한 정립된 기법을 디지탈필터(DF : digital filter)의 설계에 적용하여 파이프라인 DF 의 경우 최적설계시에 속도와 하드웨어의 최적의 절충 문제와 어레이 DF에서의 해석 에 관련된 문제점을 검토한다. 이러한 적용사례를 통해 제안된 방법이 보다 빠른 시간 에 향상된 비용함수값을 줄 수 있음이 확인되고 복잡한 디지탈필터 설계에 이용될 수 있음이 입증된다.