• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.79-84
• /
• 2014

Increasing demand for realistic media and improvement of transmission and device techniques accelerate ultra-high definition(UHD) service realization. In Korea, the cable TV broadcasting companies are planning to commercialize in Apr. 2014. For the terrestrial TV broadcasting service, technical issues are considered for the specification of UHD broadcasting system. However, the frequency bands and the system bandwidth for the terrestrial UHD broadcasting system have not been decided. In this paper, we propose required spectrum bandwidth for the next-generation terrestrial broadcasting service considering source coding, error correcting codes and modulation techniques. Also, we propose frequency management plan for terrestrial UHD broadcasting system in which we divide all parts of the country into 9 frequency zones and allocate 4 frequency band to each frequency zone considering single frequency network (SFN).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.7-15
• /
• 2002

The digital DBS tuner is designed and implemented in a CMOS process using a direct-conversion architecture that offers a high degree of integration. To generate mathched LO I/Q quadrature signals covering the total input frequency range, a fully integrated ring oscillator is employed. And, to decrease a high level of phase noise of the ring oscillator, a frequency synthesizer is designed using a double loop strucure. This paper proposes and verifies a band selective loop for fast frequency switching time of the double loop frequency synthesizer. The down-conversion mixer with source follower input stages is used for low voltage operation. An experiment implementation of the frequency synthesizer and mixer with integrated a 0.25um CMOS process achieves a switching time of 600us when frequency changes from 950 to 2150MHz. And, the experiment results show a quadrature amplitude mismatch of max. 0.06dB and a quadrature phase mismathc of max. >$3.4^{\circ}$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.159-168
• /
• 2012

In this paper, a W-band single-chip receiver MMIC for FMCW(Frequency-modulated continuous-wave) radar is presented using $0.15{\mu}m$ GaAs pHEMT technology. The receiver MMIC consists of a 4-stage low noise amplifier(LNA), a down-converting mixer and a 3-stage LO buffer amplifier. The LNA is designed to exhibit a low noise figure and high linearity. A resistive mixer is adopted as a down-converting mixer in order to obtain high linearity and low noise performance at low IF. An additional LO buffer amplifier is also demonstrated to reduce the required LO power of the W-band mixer. The fabricated W-band single-chip receiver MMIC shows an excellent performance such as a conversion gain of 6.2 dB, a noise figure of 5.0 dB and input 1-dB compression point($P_{1dB,in}$) of -12.8 dBm, at the RF frequency of $f_0$ GHz, LO input power of -1 dBm and IF frequency of 100 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.858-866
• /
• 2005

This paper proposes the method of frequency synchronization using the spectrum correlation in ATSC terrestrial DTV system. If the spectrum around pilot is severely distorted by multipath or mobile reception environment, the conventional algorithm using the pilot signal makes the estimation error of the frequency offset. Because the proposed algorithm acquires frequency synchronization using the correlation between the received specalm and the standard spectrum without the use of pilot, the proposed method can acquire frequency synchronization faster and more accurate than conventional algorithm. And this paper proposes new method for ATSC frequency synchronization without the use of pilot.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.53-60
• /
• 2001

In many applications of power electronics, high frequency resonant inverters are used, and the PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) or PWM(Pulse Width Modulation) techniques are used to control the output power of resonant inverters. And the resonant inverters have to control the output frequency for the reliable operation under the variable load conditions. In this paper, a new switching scheme is proposed as a PWM control of resonant inverters. With the proposed method, it can be obtained that optimum resonant frequency and unity output displacement factor under the variable resonant frequency adaptively. The detail algorithm or the proposed PWM switching scheme and its output characteristics are discussed. And the veridity of the proposed method is confirmed with the experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.481-487
• /
• 2011

Cyclic delay diversity (CDD) is a simple transmit diversity technique for an OFDM system using multiple transmit antennas. However, the performance of post-FFT estimation, i.e., integer frequency offset (lFO) is deteriorated by high frequency selectivity introduced by CDD. In this paper, the IFO estimation scheme is proposed for OFDM-based DRM+ system with CDD. Based on the pilot subset partitioning, the proposed IFO estimation scheme reduces the effect of performance degradation caused by frequency selectivity in OFDM systems with CDD . The simulation results show that the performance of the proposed IFO estimator is significantly improved when compared to that of the conventional IFO estimator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.572-579
• /
• 2010

Filtered multi-tone (FMT) is a form of multicarrier modulation utilizing frequency-domain equalization efficient in multi-path fading channels. Doppler frequency information can be employed for channel estimation and link adaptation to improve the performance. However, most previous studies have concentrated on the orthogonal frequency division multiplexing (OFDM) instead of FMT. Moreover, they have not considered the synchronization error that can commonly occur in practical systems. In this paper, we propose Doppler frequency estimation scheme that is effective in FMT systems with residual synchronization error and high noise levels.

• Journal of Korea Multimedia Society
• /
• v.18 no.6
• /
• pp.742-752
• /
• 2015

The communications through the power lines are called as the PLC and this is a common name for the communication modes for the information delivery. This technology transmits the data through the power lines on which the information is stored with the form of high frequency signal. The characteristic of the frequency signal is that the signal can be separated from the power line through exclusive power line modem and transmitted to the terminal devices. In this paper, 'In-home Headcount' checking algorithm using Wi-Fi and taking above mentioned advantages is proposed, and the basic Technology for such Solitary Senior Citizen's Lonely Death monitoring system has been designed and implemented. The comparative analysis has been conducted in this paper with the test-operated and test bed-completed 'Hyosimi 119 Safety-Welfare System' which is still being tested since 2008. With the 'In-home Headcount Checking Algorithm', Wi-Fi connection/disconnection status and SSIDs of relevant Wi-Fis will be checked. We expect that our proposed method will become as the basic Technology which can prevent lonely deaths of elderly people living alone. Since the PLC technology can be normally implement all the functions used on internet anticipate that the technology could be applied to many areas to construct a new form of communication network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1099-1105
• /
• 2005

TRL error correction method is widely used for measuring high frequency device mounted on PCB. In order to correct error more precisely, the characteristic impedance of standard transmission line should be known mounted for error correction. The capacitance per the unit length of transmission line is calculated by using standard transmission line which terminate resistor additionally at previous method and the characteristic impedance of standard transmission line is calculated with fitting method according to frequency, but the characteristic impedance extracted by a manufacturing inaccuracy is influenced. In this study, a novel method can reduce the manufacturing inaccuracy using measured s-parameters and can extract more accurate characteristic impedance than the previous method.