• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.397-405
• /
• 2018

As regulations governing the control of volatile organic compounds (VOCs) have become increasingly stringent in China, regenerative thermal oxidizers (RTOs) have been more frequently applied in medium- and high-concentration VOCs treatments. However, due to the lack of existing RTO-related research, experience remains a dominant factor for industrial application. This paper thus aimed to establish a model for industrial RTOs, using a transient simulation method and thermal equilibrium model to simulate the internal velocities and temperature distributions of an RTO across multiple cycles. A comparison showed an error of less than 5% between most correlating simulated and experimental measurement points, verifying that the simulation method was accurate. After verification, the velocity and temperature fields inside the RTO were simulated to study the uniformity of temperature and velocity within the packed beds: both fields displayed high uniformity after gas flowed through the honeycomb regenerator. The effects of air volume, VOCs concentrations, and valve switching times on the oxidation chamber temperature, RTO outlet temperature, and thermal efficiency (as well as their averages) were studied. The VOCs removal rate in this study was constantly above 98%, and the average thermal efficiency reached 90%.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.221-227
• /
• 2019

One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.31-37
• /
• 2000

Metal matrix composites(MMCs) are rapidly becoming one of the strongest candidates for structural materials for many high temperature application. Among the high temperature environment, thermal shock is known to cause significant degradation in most MMC system. Therefore, the nondestructive evaluation on thermal shock damage behavior of SiC/A16061 composite has been carried out using ultrasonic surface and SH-waves. For this study, Sic fiber reinforced metal matrix composite specimens fabricated by a squeeze casting technique were thermally cycled in the temperature range 25~$400^{\circ}C$ up to 1000 cycles. Three point bend test was conducted to investigate the effect of thermal shock damage on mechanical properties. The relationship between thermal shock damage behavior and the change of ultrasonic velocity and attenuation were discussed by considering SEM observation of fracture surface.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.101-103
• /
• 2000

Research for the synthesis of high-temperature polymers by the photochemical method has been carrying out. The use of cheap and available compounds (viz. benzene, its alkyl, aryl and halogen substitutes, furan and maleic anhydride) subject to ultra violet irradiation resulted in a single stage quantitative yield of about 40 new polymers: polyimide films, enamel insulation, molding materials. At present experimental & industrial lots of wire have been produced. Polymer insulation possesses temperature exploitation range (from -l00$^{\circ}C$ to +300$^{\circ}C$ ) without significant changing of properties. As a result, new polyimide lacquers for production of a wide number of technical articles, such as polyimide films, fibres, enamel-wires, press-materials have been synthesized. An application field of the polyimides in membrane technology, printing plate and optic electronics manufactures has been outlined.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제31권2호
• /
• pp.127-131
• /
• 2015

Oak silkworm, Antheraea yamamai (A. yamamai), has been used for clothing and surgical suture and considered as biomaterial due to RGD tripeptide. This paper reported the degumming conditions of A. yamamai using sodium oleate, high pressure and temperature, and sodium carbonate. Degumming ratio of A. yamamai cocoon using sodium oleate was less than 10%. High pressure and temperature treatment induced 30% weight loss of A. yamamai cocoon. The concentration, treatment temperature and time using sodium carbonate was examined and revealed the following conditions for degumming; 5% owf, 60 min at 100℃. The degummed solution was confirmed using UV and FT-IR spectrometer. Our results can be used to handle A. yamamai silkworm cocoon for further application including material processing.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.102-108
• /
• 2003

Recently, the authors have developed a new material test system fur thin film at the high temperature. It is so compact and precise with sub micron resolution that it seems to be a useful tool fur research of the oxide film growth, its mechanical behavior and failure mechanism. To this end. in this paper three methologies are described for in-situ monitoring of the displacement & strain and the temperature, the oxide thickness. These are the Laser Speckle analysis with digital image correlation technique, the two-color infra-red thermometer and the laser reflection interferometry respectively. The calibration results and some issues which should be addressed for practical application are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.231-236
• /
• 2001

A newly developed Advanced Indentation System (AIS), which is a portable and nondestructive system for evaluating tensile properties, was used to measure mechanical behavior of materials used under high temperature and pressure conditions. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. Aging effects of Cr-Mo and Cr-Mo-V steel at high temperature were simulated. Tensile properties including yield strength and tensile strength at various temperature are obtained from the test. For all test materials and conditions, the AIS-derived results were in good agreement with those from conventional standard test method. Examples of the test results ate given and potential applications of the AIS to assess the integrity of aging structures are briefly discussed.

• Carbon letters
• /
• 제8권2호
• /
• pp.91-94
• /
• 2007

The application of Carbon and graphite based materials in unprotected environment is limited to a temperature of $450^{\circ}C$ or so because of their susceptibility to oxidation at this temperature and higher. To over come these obstacles a low cost chemical vapour reaction process (CVR) was developed to give crystalline and high purity SiC coating on graphite and isotropic C/C composite. CVR is most effective carbothermal reduction method for conversation of a few micron of carbon layer to SiC. In the CVR method, a sic conversation layer is formed by reaction between carbon and gaseous reagent silicon monoxide at high temperature. Characterization of SiC coating was carried out using SEM. The other properties studied were hardness density and conversion efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.489-492
• /
• 2009

We report white OLED with high color temperature based on simple stacked structure for medical display applications. White OLED was fabricated with two emitting materials of fluorescent blue dopant and phosphorescent yellow dopant. We achieved luminance efficiency of 16.2cd/A and CIE color coordinates of (0.305, 0.317) at 10mA/$cm^2$. In particular, the correlated color temperature was higher than 7,000K, enough for display applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.101-103
• /
• 2000

Research for the synthesis of high-temperature polymers by the Photochemical method has been carrying out. The use of cheap and available compounds (viz. benzene, its alkyl, aryl and halogen substitutes, furan and maleic anhydride) subject to ultra violet irradiation resulted in a single stage quantitative yield of about 40 new polymers: polyimide films, enamel insulation, molding materials. At present experimental ＆ industrial lots of wire have been produced. Polymer insulation possesses temperature exploitation range (from -l00$^{\circ}C$ to +300$^{\circ}C$) without significant changing of properties. As a result, new polyimide lacquers for production of a wide number of technical articles, such as polyimide films, fibers, enamel-wires, press-materials have been synthesized. An application field of the polyimides in membrane technology, printing plate and optic electronics manufactures has been outlined.